Anokiwave’s mmWave technologies are enabling the future of coexistence and convergence of terrestrial and non-terrestrial networks to increase the scale and scope of connectivity for all.

Anokiwave, Inc. announced the latest addition to its executive leadership team with the appointment of Ian Gresham to the position of chief systems architect. Gresham will report directly to Chief Executive Officer Robert Donahue.

Anokiwave, Inc. announced the appointment of Ryan Jennings as vice president of Satcom and Systems and will be responsible for growing the satcom customer base as well as defining and leading the architecture for their future satcom products. 

Anokiwave continues to focus on delivering a high volume manufacturing IC platform that enables the lowest cost and highest performing mmWave active antennas.

Requtech’s latest lightweight electronically scanned antennas at Ku- and Ka-Bands, powered by Anokiwave’s satcom ICs, are delivering high performance, low-cost user terminals for satcom-on-the-move.

Anokiwave and hiSky will collaborate to develop the next-generation of low-cost, voice/data/IoT terminals for hiSky’s Smartellite™ offering.

Continuing their collaboration developing next-generation SATCOM terminals, Anokiwave and Ball Aerospace are adding a Ku-Band option to Ball’s portfolio of flat panel phased array antennas, now offering both Ku- and K/Ka-Band antennas.

Anokiwave and Ball Aerospace are collaborating to develop a new generation of SATCOM terminal antennas, with Anokiwave’s second-generation K- and Ka-Band silicon RFICs integrated with Ball’s electronically steerable K- and Ka-Band antennas.

Anokiwave has appointed William “Bill” Nevius as vice president and general manager of its aerospace and defense (A&D) portfolio. He will lead the development of strategic defense accounts to grow Anokiwave’s business in satellite communications, radar, EW, communications and space programs.

Anokiwave has expanded its San Diego operation to a new facility, tripling its floor space and lab capabilities and adding a mmWave lab with anechoic chamber for all active antenna and IC design and test.

As the commercial launch of 5G services rapidly approaches and with the U.S. FCC Auction 102 (24 GHz Band) just completing –raising over $2 billion, Anokiwave is showcasing its portfolio of 24/26 GHz ICs for 5G applications at IMS2019 in Boston, Mass.

As the commercial launch of 5G services rapidly approaches and in anticipation of the 37/39 GHz U.S. FCC auction later this year, Anokiwave is showcasing its portfolio of 37/39 GHz  ICs for 5G applications at IMS2019 in Boston, Mass.

Anokiwave Inc. will continue its presence at the IEEE International Microwave Symposium (IMS2019) to be held June 2-7, 2019 in Boston, Mass. with participation in the 5G Summit and at the exposition in Booth 223.

Anokiwave Inc. announced further expansion of its SATCOM beamformer IC family with the new Generation-2 Ku-Band set of ICs for the design and commercial deployment of phased array-based ground terminals.

Anokiwave announced the opening of its latest office, in the Xinyi District in Taipei, Taiwan, to provide sales and application engineering support and deepen Anokiwave's engagement with local distribution partners.

Anokiwave Inc. has appointed Abhishek Kapoor as VP of sales.

Anokiwave Inc. will continue its presence at the IEEE International Microwave Symposium (IMS2018) with participation in the exposition at Booth #538.

Anokiwave announced the next product in a new family of 5G-Gen 2 silicon quad core ICs that enable 3GPP compliant base stations, with the worldwide release of the 24/26 GHz AWMF-0139.

Continuing to redefine the traditional single function gain block, Anokiwave is releasing two new ICs in a family of multi-function microwave and mmWave silicon ICs, offering transmit/receive functionality with active gain and phase control.

Anokiwave Inc. has opened a mmWave design verification laboratory in its San Diego office.

Anokiwave, Inc. announced the introduction of the first in a family of Phased Array Antenna Innovator’s Kits, the AWMF-0129, driven by the Anokiwave AWMF-0108 28 GHz 5G Quad Core IC with embedded functions for remote telemetry and low-latency steering^TM.

Anokiwave’s highest performing and low-cost mmWave Si ICs are now available for India’s 26 GHz 5G radios.

Anokiwave, Inc. introduced both its fourth generation of high efficiency multi-band Si IC beamformer ICs as well as industry’s first single-chip dual channel IF up-/down-converter with fully integrated LO synthesizer.

Anokiwave, Inc. introduced the industry’s first single-chip dual-channel IF up-/down-converter with fully integrated LO synthesizer, delivering a single-chip multi-band solution.

Anokiwave, Inc. introduced its fourth generation high efficiency multi-band Si-based IC family, pushing levels of performance and cost so network operators can start to accelerate the builds of greener, lower cost and smaller form factor mmWave 5G radios, for every 3GPP FR2 band.

An introduction to the first in its family of a complete mmWave to IF Phased Array Antenna Innovator Kits, aimed to assist 5G equipment manufacturers.

Anokiwave's latest generation provides a complete RF signal chain solution for the 24/26, 28 and 37/39 GHz bands.

AWMF-0146 / AWMF-0147 enable Ku-Band phased array active antennas that can auto-align and auto-position to support ground and aviation-based use cases for LEO/MEO/GEO satellites.

The AWMF-0165 Tx/Rx Beamformer IC supports dual polarization architectures while adding new and enhanced features.

Anokiwave has announced the first in a family of third-generation silicon ICs for 5G beamforming, supporting a four channel, dual polarization system or eight channel, single polarization at 28 GHz.

Anokiwave announced the worldwide release of the 2^nd-generation K/Ka-Band SATCOM Beamformer IC family for the design and commercial deployment of phased array based ground terminals.

Anokiwave announced the availability of the complete 5G Gen-2 Silicon Quad Core IC family that enables 3GPP compliant base stations. The 5G-Gen 2 IC family now supports all major 5G mmW bands – 24/26 GHz, 28 GHz, and 37/39 GHz.

Continuing to redefine the traditional single function gain blocks, Anokiwave is introducing a family of multi-function microwave and mmWave Silicon ICs, offering complete transmit/receive functionality with active gain and phase control.

Anokiwave is redefining traditional single function gain blocks with its new family of multi-function microwave and mmWave silicon ICs, offering complete transmit/receive functionality with active gain and phase control.

Anokiwave announced the first product in a family of second-generation 5G silicon quad core ICs that enable 3GPP-compliant base stations.  The AWMF-0156 operates from 37.1 to 40.0 GHz, supports four radiating elements and includes gain and phase controls for analog beam steering. 

Anokiwave Inc. announced the latest product in its family of mmWave Phased Array Antenna Innovator’s Kits, the AWA-0142, driven by the Anokiwave AWMF- 0135 26GHz 5G Quad Core IC with embedded functions for remote telemetry and low-latency steering^TM.

Anokiwave has expanded its 5G Active Antenna family with the introduction of the AWA-0134-IK, a 256-element reconfigurable Active Antenna array. The AWA-0134 can act as a single beam 256-element array or as a four beam 64 element array that enables 4x4 MIMO. 

Anokiwave, Inc. announced the AWA-0134, driven by the Anokiwave AWMF-0108 28 GHz 5G Quad Core IC, with embedded functions for remote telemetry and low-latency steering.

Anokiwave, Inc. and Ball Aerospace announced a collaboration on May 9, 2017 that will enable the 5G wireless revolution. The collaboration accelerates mmWave 5G phased array developments with the introduction of a family of commercial, active phased array Innovator Kits. Included are kit offerings like the 64-element, 28 GHz AWMF-0129 enable improved mmWave 5G network efficiency and ease of developing commercial phased array antennas.

Anokiwave, Inc. today announced the expansion of its family of Ka-band 5G ICs with the worldwide release of the first commercially available 39 GHz silicon active antenna quad core ICs for 5G communications markets.

Anokiwave announced the introduction of the first in a family of Phased Array Antenna Innovator’s Kits, the AWMF-0129, driven by the Anokiwave AWMF-0108 28GHz 5G Quad Core IC with embedded functions for remote telemetry and low-latency steering™. The AWMF-0129 is a 64-element, single polarization 5G phased array antenna designed to cover the 27.5 to 30 GHz frequency band. It is a planar antenna that can be used either as a stand-alone component, or combined and synchronized with other arrays.