Empower RF Systems is an established manufacturer of high power solid state RF & microwave amplifiers offering modules, rack-mount amplifiers, and multi-function power amplifier solutions to 6 GHz, with output power combinations from tens of watts to multi-kilowatts. Applications include communications, radar, Satcom and telemetry, wireless infrastructure, electronic attack, product testing, and EMC.
RSS
PHA-1H+ (RoHS compliant) is an advanced wideband amplifier fabricated using E-PHEMT technology and offers extremely high dynamic range over a broad frequency range and with low noise figure. In addition, the PHA-1H+, unlike competitive models, has good input and output return loss over a broad frequency range without the need for external matching components and has demonstrated excellent reliability.
RFMW Ltd. announces design and sales support for the Qorvo TQL9093 ultra low noise amplifier featuring flat gain. Capable of operation from 600 to 4200 MHz, the TQL9093 is optimized for wireless infrastructure applications spanning 1500 to 4000 MHz and offers >19 dB of gain +/-0.5 dB over this span. Midband OIP3 is 41.5 dBm while noise figure is as low as 0.54 dB.
RFMW Ltd. announces design and sales support for the Qorvo TQL9062, an internally matched, LNA gain block suitable for applications spanning 0.5 to 6 GHz. The TQL9062 features a ‘shutdown’ mode requiring 1.8 V TTL logic and supporting both TDD and FDD systems such as repeaters, DAS, defense communications and infrastructure applications where efficiency and range are important. Noise Figure is noted as 1.5 dB while mid-band gain is 15.5 dB and OIP3 is >40 dBm.
Skyworks is pleased to introduce two broadband, 75 Ohm MMIC front-end, low-noise amplifiers (LNAs) designed specifically for set-top box applications: the SKY65450-92LF (with bypass mode) and the SKY65452-92LF. These devices provide high linearity and excellent gain over a wide frequency range (40 MHz to 1 GHz) with minimal external components, enabling OEMs to leverage cost efficiencies through lower bill of materials.
RFMW Ltd. announces design and sales support for the Qorvo TQP9218, a quarter watt (24.5 dBm) and highly efficient power amplifier covering 1805 to 1880 MHz. ACLR at 24 dBm is -48 dBc. The TQP9218 is internally matched for ease of design and offers good linear performance without the need for linearization. Running from a nominal 4.5 V supply, the TQP9218 draws 240 mA and boasts 16% PAE while offering 31 dB of gain.
Exodus Advanced Communication introduces AMP3085. 8 to 12 GHz, 100 W Min / 120 W typical GAN module. It features instantaneous bandwidth from 8000 to 12000 MHz with 100 W minimum saturated CW power, 4.0 dB peak to peak flatness and 22 A max consumption. Suitable for any application requiring high power and wide band coverage such as TWTA replacement, EW, and EMI/RFI susceptibility testing.
Anokiwave Inc. announced it has extended its X-band IC product line with the addition of the AWMF-0106 front end IC. This product release completes the family of X-band radar solutions for commercial radar and 5G communications markets. The AWMF-0106 is an integrated power amplifier; low noise amplifier, limiter, and T/R switch intended to provide a low noise, medium power front end for the Anokiwave AWS-0103 and AWS-0105 high Rx input linearity X-band core IC solutions.
Custom MMIC is announcing the CMD232 2 to 9 GHz driver amplifier. The CMD232 is a wideband GaAs MMIC driver amplifier that offers high gain, wide bandwidth, single positive supply voltage, and a small die size. It is ideally suited for military, space, and communications systems that require small size and high linearity. At 6 GHz the device delivers greater than 15 dB of gain with a corresponding output 1 dB compression point of +17 dBm and an output IP3 of 23 dBm.
Skyworks Solutions Inc. launched SkyOne® Ultra 2.0, a highly integrated, single LTE SKU solution that solves harmonically-related carrier aggregation challenges through design while delivering the highest linear RF power as well as power added efficiency in the world. This next generation platform is a complete RF front-end system consisting of three LTE modules which utilize Skyworks' revolutionary SkyBlue™ technology in addition to a separate 2G transmitter.