PMI Model DTA-2G18G-60-CD-2-OPT-1G18G is a non-reflective, 10 BIT, programmable 60 dB, pin diode attenuator with step resolution as low as 0.06 dB over the frequency range of 1.0 to 18.0 GHz. This model is offered in a slim line housing measuring only 0.5" H.
RSS
PMI Model No. SDLVA-0R81R6-75-CD-3 is a successive detection log video amplifier (SDLVA) that operates between the 850 to 1550 MHz frequency range. It has a dynamic range of 75 dB, a log slope of 40 mV/dB and a nominal video bandwidth of 20 MHz. It has been designed using cutting edge GaAs technology which provides stunning performance and reliability in a compact package.
PMI Model No. HADA-D2002 is a Detector Log Video Amplifier (DLVA) that operates between the frequency range of 2.0 to 18.0 GHz. It has a dynamic range of 40 dB with a log slope of 50 mV/dB and a nominal video bandwidth of 12 MHz. This unit has been designed with cutting edge technology which provides stunning performance and high reliability in a compact package.
PMI Model No. GMTA-1005 is a threshold detector designed to operate over the frequency range of 8 to 18 GHz. It has a fixed threshold level of -42 dBm with threshold stability of +/-3.0 dBm over frequency and temperature.
PMI Model No. PE2157R52015SFF Rev. D is a 7.5 to 20.25 GHz, low noise amplifier that provides a small gain window of 14.5 to 17.5 with a typical gain flatness of +/-1.5 dB. The noise figure is 6.0 dB max and offers an OP1 dB of 18.0 dBm min. The operating voltage is +15 VDC and the current draw is 300 mA max. This unit is supplied with removable SMA(F) connectors in our standard PE2 housing.
PMI Model No. PEC2-8G18G-21DBM-LM-SFF is an 8.0 to 18.0 GHz limiting amplifier that provides an nominal output power level of +20.0 dBm for an input power range of -50 to +10 dBm CW. This model has output power level versus frequency range compensation such that the limited output power has a flat frequency response. The unit is supplied in a small housing measuring only 2.98" x 0.78" x 0.36".
PMI Model No. PEC-14-127-8-12-SFF Rev B is a wide band front end amplifier that operates over the frequency range of 1.0 to 26.5 GHz. This model provides gain of 13 to 17 dBm and has a maximum gain flatness of +/-1.5 dB. The maximum noise figure is 5.5 dB from 1.0 to 20.0 GHZ and 6.0 dB from 20.0 to 26.5 GHz. The housing measures 0.83" x 0.75" x 0.36" and is supplied with removable SMA connectors.
PMI Model No. PA-40-17D521D5-5R0-36-12-292FF is a medium power amplifier that operates over the frequency range of 15.7 to 21.5 GHz. It has a nominal gain of 40 dB typical with a maximum gain flatness of +/-1.75 dB and a typical noise figure of 5.0 dB. It is supplied with SMA(F) connectors in a housing that measures 2.6" x 2.0" x 0.5"
Richardson RFPD, Inc. announces immediate availability and full design support capabilities for three new surface-mount technology (SMT) high-power attenuators from Anaren. These 30 to 50 W devicesare high-performance; high-power chip attenuators covering from DC to 3.0 GHz and featuring high return loss and small footprints.
RFMW Ltd. announces design and sales support for P1dB’s 100 W, low PIM termination. Covering 0.8 to 2.6GHz, the P1dB P1LP-Term-716J100W features low PIM performance of <163dBc at +43dBm/tone. VSWR performance is 1.09:1 from a 7/16 female connector.