PMI Model No. P2T-9D25G-80-R-SFF-3W is a single pole, two throw, reflective pin diode switch that operates over a single frequency range of 9.25 +/- 30 MHz. This model has a maximum insertion loss of 34 dBm CW and a minimum isolation specification of 80 dB. It operates at 34 dBm CW max, or +33 dBm, 2 microsecond pulse width (PW) and 8KHz (operating).
RSS
Richardson RFPD, Inc. announces immediate availability and full design support capabilities for four new broadband RF gain blocksfrom Analog Devices, Inc. (ADI). The new gain blocks are single-ended RF/IF gain block amplifiers that operate from 30 MHz to 6 GHz and offer up to 24 dB gain and 40 dBm third-order intercept point (OIP3).
RFMW, Ltd. announces design and sales support for TriQuint’s TGA2567-SM, an AlN packaged, 2 to 20 GHz low noise amplifier (LNA). The TGA2567-SM provides 19 dBm P1 dB output power with 17 dB of small signal gain. Greater than 16 dB of adjustable gain can be achieved by varying Vg2. Typical mid-band noise figure is 2 dB while OIP3 is specified at 29 dBm.
PMI Model No. PIQ-2G18G-360-16-CD-1 is a 2.0 to 18.0 GHz, high performance I/Q vector modulator with 2 x 12 bit monotonic TTL compatible channels (I and Q). This model offers a full 360 degrees of phase shift with a minimum of 16 dB of amplitude control.
PMI Model No. TD-30T-SHS-218-2G4G-PECL is a high speed, LVPECL logic output threshold detector designed to operate from 2.0 to 18.0 GHz, but optimized for 2.0 to 4.0 GHz. This detector has a propagation delay of 15 ns max and has a LVPECL output.
PMI Model No. LM-8G18G-7-33DBM-12V is an active limiter that operates over a frequency range of 8.0 to 18.0 GHz with a maximum input power of +33 dBm CW and a maximum leakage power of +7.1 dBm. The VSWR is 2.0:1 and the operating voltage is +12 VDC with a maximum current draw of 100 mA. The unit is supplied with removable SMA(F) connectors in our standard PE2 housing.
PMI Model No. LM-500M8G-2-33DBM-12Vis an active limiter that operates over a frequency range of 0.5 to 8.0 GHz with a maximum input power of +33 dBm CW and a maximum leakage power of +2.3 dBm. The VSWR is 2.0:1 and the operating voltage is +12 VDC with a typical current draw of 180 mA. The unit is supplied with removable SMA(F) connectors in our standard PE2 housing.
PMI Model No. P2T-8G12G-90-T-SFF is a single pole, two throw terminated solid state switch. This model operates over the frequency range of 8.0 to 12.0 GHz and has a typical insertion loss of 2.4 dB, isolation of 75 dB minimum and a typical switching speed of 15 nsec. This unit is capable of operating with RF input power levels up to 20 dBm CW.
PMI Model No. LM-2G18G-2D8-33DBM-12V is an active limiter that operates over a frequency range of 2.0 to 18.0GHz with max input power of +33 dBm CW and a maximum leakage power of +2.8 dBm. The VSWR is 2.0:1 max the operating voltage is +12 VDC with a current draw of 180 mA max.. The unit is supplied with removable SMA(F) connectors in our standard PE2 housing.
PMI Model No. LM-8G18G-7-33DBM-12V is an active limiter that operates over a frequency range of 8.0 to 18.0 GHz with a maximum input power of +33 dBm CW and a maximum leakage power of +7.1 dBm. The VSWR is 2.0:1 and the operating voltage is +12 VDC with a maximum current draw of 100 mA.