Products

RSS

RFMW Ltd. announces design and sales support for an expanded offering of SMD square air coils from Frontier Electronics. The new LSQ1111A – LSQ2929A series offer a higher current rating (up to 5.7 A), an inductance range of 27 to 500 nH and SRF values as high as 2.6 GHz. Designed primarily for use in RF circuits such as filters, bypassing and/or decoupling signals, these larger coils compliment the already established LSQ0706A –  LSQ0908A series.

RFMW Ltd. announces design and sales support for the Skyworks Solutions SKY66105-11 front end module (FEM). The SKY66105-11 offers high output power (30 dBm) for 902 to 931 MHz, ISM band transmit applications such as smart metering for water, gas and electric. With integrated harmonic filters and a DPDT switch for diversity antennas, this FEM also incorporates on-board matching and integrated shielding thereby reducing required board space and easing design.

Crane Aerospace & Electronics announced the introduction of a space grade DC-DC converter family. The SMHF42 is a family of fully isolated, 15 W products with a range of single and dual outputs, operating over an input voltage range of 35 to 55 volts with 80 volt transient protection. They are available in Class H and Class K versions (per MIL-PRF 38534) with radiation tolerance of L (50 krad(Si)) and R (100 krad(Si)).  

RFMW Ltd. announces design and sales support for a 1900 W pulsed RF power transistor from Ampleon. The BLF189XRB supports industrial applications in the 30 to 150 MHz frequency range such as magnetic resonance imaging (MRI). Offering gain of 23 dB, efficiency is 63%. Excellent ruggedness is a hall mark of Ampleon high power LDMOS and the BLF189XRB can withstand VSWR mismatch as high as 65:1.

Pasternack has released six new free-running reference oscillators that generate a highly stable and accurate output frequency response with low phase noise and spurious performance levels, making them ideal in phase locked loops, function generators, frequency synthesizers and receivers for communication, radar, navigation, surveillance and test and measurement applications.

AR’s 20000SP1G2 broadband solid state microwave pulsed amplifier provides 20,000 W of output power from 1 to 2 GHz. It is designed for short pulse applications at low duty factors where instantaneous bandwidth and high gain are required. The amplifier can be used for a variety of applications in Test and Measurement, (including EMC RF pulse susceptibility testing), Industrial and University Research and Development, and Service applications.

Laser Services is announcing the acquisition of a laser marking system that enables Laser Services to provide higher quality marking on a wider range of materials/surfaces, all facilitating a faster turn-around on marking requirements.

RFMW Ltd. announces design and sales support for a 1500 W CW (1700 W pulsed) RF power transistor from Ampleon. The BLF189XRA spans a frequency range of 30 to 500 MHz for broadcast and industrial applications such as CO2, plasma RF, and VHF radio. Offering gain of 26.5 dB in CW operation, efficiency is 75%.

When it comes to test and measurement, SUCOFLEX 500 assemblies guarantee the highest level of satisfaction. Not only are they extremely flexible and easy to use, thanks to their unique design, they also deliver best-in-class phase and amplitude stability with flexure, movement, temperature and tensile stress. SUCOFLEX 526V is the only 26.5 GHz VNA microwave cable assembly worldwide with a 50 ppm phase variation.

Analog Devices, Inc. (ADI) introduced a 28 nm digital-to-analog converter (DAC) as part of a series of high speed DACs. The AD9172 meets the demands of gigahertz bandwidth applications and delivers the increased spectral efficiency needed for 4G / 5G multi-band wireless communications base stations and 2 GHz E-Band microwave point-to-point backhaul radios. Its design benefits production instrumentation targeting multi-standard direct-to-RF signal synthesis and provides a solution for defense electronics requiring greater detection range.