Products

RSS

Manufacturers who want to integrate wireless modules into their products now face completely new test requirements. The US's largest wireless network operator is the first to publish specific test plans for IoT integrators. In response, Rohde & Schwarz announces the availability of its new R&S TS 290 IoT carrier acceptance test system, which is based on these test plans. Claimed to be the only test solution of its kind, it offers RF, protocol and performance test cases in a single box.

AtlanTecRF has launched a lightweight, rugged and compact Drone Payload Satellite Simulator. It provides a transmit (Tx) to receive (Rx) loop-back in testing mostly compact and mobile satellite communications systems in situ and without the need for connection via cables.

Model SBP-7531142515-1010-E1 is a power amplifier with a typical small signal gain of 25 dB and a nominal output power of +15 dBm across the frequency range of 75 to 110 GHz. The DC power requirement for the amplifier is +15 VDC/190 mA. The mechanical configuration offers an in-line structure with WR-10 waveguides and UG-387/U-M flanges.

RFMW, Ltd. announces design and sales support for an integrated power amplifier module from Qorvo.

PMI Model No. HPF18G-DC15G is a low loss ultra-small high pass filter with a passband frequency range of 18.0 to 26.5 GHz and greater than 60 dB rejection from DC to 15.0 GHz.  Features include 2.92mm female connectors. Unit size is Features include 2.92mm female connectors. Unit size is 0.64" x 0.58" x 0.38". 

PMI Model No. DPX-18G26R5G40G is an ultra small, low loss diplexer for use over the frequency range of 18.0 to 40.0 GHz.  This model is designed to have a crossover frequency at 26.5 GHz and greater than 60 dB of rejection.  Features include 2.92mm female connectors. Unit size is 0.80" x 0.60" x 0.38". 

PMI Model No. P2T-1G1R1G-25-R-SFF-100W-SM is a single pole, two throw, hermetically sealed reflective switch designed to operate over the 1.0 to 1.1 GHz frequency range.  This model is designed to handle 100 Watts average input power and 5 kW peak having a 17 µs pulse width and 2% duty cycle.  Features include TNC female connectors. Unit size is 3.25" x 2.75" x 0.70".

PMI Model No: P1T-DC40G-65-T-292FF-1NS-OPT18G-50OHM is a SPST Absorptive, FET switch that operates from DC to 18.0 GHz.  The typical Isolation is 60 dB with an Insertion Loss of 4.5 dB typical and a 6 ns Switching Speed (On/Off) and a 2 ns Rise/Fall.  SMA female connectors (J1 - J2) and SMC control connector.  The size is 1.30" X 1.20" X 0.50".  

PMI Model No. P2T-6G18G-40-R-570-TFF-1D6KW is a reflective 1.6 kilowatt high-power cold switching single pole double throw switch operating in the 6.0 to18.0 GHz frequency range.  Features include TNC female connectors. Unit size is 2.00" x 2.00" x 0.75" with painted blue finish. 

PMI Model No.P2T-1G18G-10-R-528-SFF-HIP10W is a single pole, two throw, reflective switch capable of operating with an input power of 10 W CW over the 1.0 to 18.0 GHz frequency range.  This model features high input power handling capability while offering very fast switching speeds of 40 ns.  This switch is compact in size and weight and only consumes 2.5 mA of positive and 2.5 mA of negative DC current making it suitable for a wide range of applications.   Features include SMA female connectors, and TTL - Single Line. Unit size is 1.2" x 1.0" x 0.5".