The TMD Technologies Division of CPI has added a new solid-state power amplifier (SSPA) to its wide range of innovative products for defence, electronic warfare and radar applications.

The PTXM9754 is an ultra compact modular Microwave Power Module with an integrated “Super Mini” Travelling Wave Tube (TWT), a solid state preamplifier and an optimized high density switch mode power supply to produce a single “drop-in” microwave amplifier block.

The VSX3617 solid state transmitter is designed for use in radar applications and covers the 9.0 to 10.0 GHz frequency band.

Communications & Power Industries' high voltage power supplies are compact, high altitude compliant, and airborne qualified.

CPI VPC3475A magnetron transmitter is developed as a fully integrated magnetron system operating up to 320 kW peak power. 

VKX-8253A is an electromagnet focused, 9.3 GHz klystron which has demonstrated peak power of 5.5 MW with 18 kW average, at an RF pulse width of 9 μs.

VMC3109 magnetron delivers high peak and average RF power for use in medical or industrial applications.

Receiver Protectors including Solid state limiters, TR limiters, Pre-TR limiters, Pre-TR tubes, TR tubes, ATR tubes, and multipactors.

VSX3696 is a 1.8 kW X-band solid state power amplifier optimized for pulse radars and is rugged, reliable, and easy to maintain.  

ECWM-75L, a high output power 75 kW L-band CW magnetron that delivers 75 kW minimum continuous output power at typical 88% efficient operation.

The VTM-6199C4 Mini Helix Traveling-Wave Tube features include PPM Focusing, Coaxial Input and Output, SMA/TNC connectors and much more.

L-band, solid state pulsed amplifier’s (VSL3679) versatile modular assembly.

1.0 kW compact X-Band, SSPA VSX3695, using proven GaN technology. Easily combined to create high power X-band radar transmitters up to 50 kW.  

CLS Series spans the spectrum from low-frequency coaxial limiters to complete Pre-TR limiters, as well as TR limiters with attenuation and phase control.

CPI Beverly’s VSC3701 compact and high efficiency solid state pulsed transmitter, with proven GaN technology, can be packaged in several configurations to suit your requirements.

CPI Beverly Microwave Division’s Wide Range Of Integrated Microwave Assemblies includes: attenuators, integrated front ends, receivers, solid state coaxial limiters, solid state switches and more.

CPI Beverly’s 3469 series magnetron transmitter is a compact, user-friendly amplifier for indoor or outdoor mounted radar applications. It is capable of operating several magnetron types up to 400 kW peak power.

CPI Beverly is the world’s largest manufacturer of Receiver Protectors. Our solid state CLS limiter series spans the spectrum from low-frequency coaxial limiters to complete Pre-TR limiters.

The VPC3475A magnetron transmitter is developed as a fully integrated magnetron system operating up to 320 kW peak power. This microwave transmitter uses a CPI coaxial magnetron as its RF output device. 

The VS Series of modular GaN power amplifiers are available in single brick and dual brick configurations in S, C and X-Bands, with power levels from 900 W to 2 kW at 10% duty. With integral air cooling, and amplifier health monitoring, it is designed to be a turnkey Solid state based solution, capable of multi-platform support. 

The VPW3475 magnetron transmitter is developed as a fully integrated magnetron system operating up to 350 kW peak power. This microwave transmitter uses a CPI coaxial magnetron as its RF output device. The frequency of operation is magnetron dependent. Any CPI magnetron with RF power range up to 400 kW can be used in this transmitter. CPI provides any modifications required for the particular magnetron chosen. 

A magnetron is a high power microwave oscillator in which the potential energy of an electron cloud near the cathode is converted into RF energy in a series of cavity resonators. The VMX3045 magnetron delivers high peak and average RF power for use in medical or industrial applications. The VMX3045 is a small and light weight magnetron that can be easily installed in numerous platforms. The small form factor is ideally suited for mobile applications or in systems where space is at a premium.

CPI Beverly Microwave Division manufactures a variety of receivers from L-band to Ka-band. Features include dual-conversion radar receivers, receivers that can be selected to output the first IF and wide-band L-band signal or the second IF signal converted to VHF. Receivers are designed to have a high dynamic range to operate in a multiplesystem environment.

A magnetron is a high power microwave oscillator in which the potential energy of an electron cloud near the cathode is converted into RF energy in a series of cavity resonators. The MC3109 magnetron delivers high peak and average RF power for use in medical or industrial applications. The VMC3109 will mount directly into new and existing sockets and can be operated under various pulse and input conditions to accommodate wide ranging operating requirements.