Linear Technology Corporation announces the LT3065,a high voltage, low noise, low dropout voltage linear regulator offering precision, programmable current limit and a power good flag. The device delivers up to 500 mA output current with a 300 mV dropout voltage at full load. It features a wide 1.8 to 45 V input voltage range and output voltage is adjustable from 0.6 to 40 V.
RSS
Agilent Technologies Inc. introduced the new M8000 Series BER test solution, a highly integrated and scalable bit error ratio test solution for physical-layer characterization, validation and compliance testing for receivers used in multigigabit digital designs. The new M8000 Series BER test solution provides accurate and reliable results that accelerate insight into the performance margins of high-speed digital devices.
Agilent Technologies Inc. announced the E8486A waveguide power sensor. Designed with a WR-12 flange connector, the E8486A makes precise and accurate power measurements in the E-band spectrum of 60 to 90 GHz, making the sensor the ideal solution to meet the rapid demand in E-band telecommunication applications.
Model SFA-923963618-10SF-S1 is a W-Band X6 active multiplier with center frequency at 94 GHz with minimum ± 2 GHz operational bandwidth. The active multiplier converts 15.33 to 16.0 GHz/+5 dBm input signal to deliver 92 to 96 GHz frequency band with more than +18 dBm power.
RFMW Ltd. announces design and sales support for low passive inter-modulation (PIM) terminations from EMC Technology. The 32P7197F, 110 W flange mount termination boasts a PIM spec of -127 dBc with two 20 W input tones. Designed for demanding infrastructure applications, EMC’s 32P7197F operates to 2 GHz with a maximum VSWR of 1.25:1.
Power, efficiency, and bandwidth. Werlatone provides all three qualities in its growing line of high power 2-way combiners/dividers. Model D9392 is no exception. Covering the full 500 to 2500 MHz, the D9392 is conservatively rated at 500 W CW, and operates with less than 0.3 dB of insertion loss.
Our newest addition to our 20 to 1000 MHz family of products is the Model D9317. This 200 W CW, 2-way combiner operates with less than 0.7 dB insertion loss, and a minimum of 15 dB isolation. Measuring just 3.75 x 3.75 x 0.9", the D9317 is ideal for combining four 50 W modules.
Werlatone introduces its new line of high power, absorptive filters with the Model AF9350. This UHF, low pass filter covers the 10 to 500 MHz band, and has an average power rating of 400 W CW. The AF9350 incurs a rejection of 45 dB minimum at the 750 to 3000 MHz band, and power rating of 25 W CW from 501 to 5000 MHz.
The Model AF9349 is a VHF, low pass absorptive filter, covering the 10-150 MHz bandwidth. This high power design is conservatively rated at 500 W CW (Pass Band), and 100 W CW (Stop Band). The Rejection is guaranteed at -50 dB from 300 to 1500 MHz.