Products

RSS

Empower RF is announcing wide availability of their field proven model 2185 high power pulsed amplifier operating from 960 to 1215 MHz at 10 KW Peak and duty cycles from 0.1 to 5%. This compact and versatile radar transmitting amplifier, with flexible operating modes, makes an ideal fit for radar component testing, advanced research, and system development. Because of its superior SWaP, it is also well suited for mobile EW.

Richardson RFPD Inc. announced the availability of a integrated, dual RF transceiver from Analog Devices, Inc. ADI's AD9371 is a highly-integrated, wideband RF transceiver offering dual channel transmitters and receivers, integrated synthesizers, and digital signal-processing functions. With a tuning range of 300 MHz to 6 GHz, 250 MHz signal bandwidth, and power consumption of less than 5 W under standard operating conditions.

Anritsu Co. introduced software for its radio communications analyzer MT8821C that creates the industry’s first test solution that supports evaluation of 4 x 4 MIMO 256 QAM RF Rx performance for all DL 3CC CA band combinations with no restrictions on frequency and signal bandwidth combinations. The software provides wireless chipset and UE manufacturers.

RFMW Ltd. announces design and sales support for SANAV antenna implementations. Focusing on sub-1 GHz products such as ISM band “Smart” meters (433/868/915 MHz), SANAV supports water, gas and electrical meters with a variety of antenna options. SANAV offers standardized antennas as well as customer specific designs based on frequency, available size, materials, etc.

RFMW Ltd. announces design and sales support for a high linearity amplifier from Amplifier Solutions Corporation (ASC). The ASC ASC520 provides a minimum of 33 dBm output power from 20 to 1200 MHz. Typical RF output power is 37 dBm to 550 MHz and 35 dBm from 550 to 860 MHz. Associated power gain is an extremely flat 22 dB. IP3, measured with 2 tones at +15 dBm/tone, is 52 dBm.

SemiGen Inc. and RF Supply Center offers a series of beam lead PINs, the SBL 2000. The SBL2000 beam lead PIN diodes feature switching speeds as low as 3 ns with both low capacitance and resistance. SemiGen’s beam lead PINs are optimally designed during assembly for high levels of mechanical strength and stability with an operating temperature ranging from -55^oC to +150^oC.

Custom MMIC is pleased to announce a GaAs MMIC frequency doubler, the CMD225C3. The released CMD225C3 operates with an input frequency range of 4 to 8 GHz. This passive frequency doubler can be driven with a +15 dBm input signal with a low conversion loss of 13 dB, and excellent Fo and 3 Fo isolations of at least 47 dBc. THe CMD225C3 is a 50 ohm matched design to eliminate the need for RF port matching.

PPI is offering traditional NP0, Hi-Q / low ESR 0505C, 1111C, 2225C and 3838C multilayer ceramic series capacitors with an increased temperature and life test performance. They are now qualified to 200°C, under 2 x WVDC, for 2000 hours. The 6040C, 7676C and the 1313C (UHF/RF Hi-Q) ceramic capacitors are now qualified to 175°C.

AtlanTecRF launched a series of ethernet controlled satcom signal generators offering exceptional versatility in frequency and level control. Designed to provide a built-in signal source for satellite communications approved installations as well as general purpose and production line testing, the ESG Series of Signal Generators offers ethernet control for output frequencies covering all bands including L, S, C, X, Ku, Ka and Q.

RFMW Ltd. announces design and sales support for a surface mount GaN power amplifier from Qorvo. The Qorvo TGA2830-SM offers 18 W of saturated output power from 2.7 to 3.5 GHz. Small signal gain is >30.5 dB and input return loss is rated at >11 dB. The TGA2830-SM draws 225 mA from a 20 to 32 V bias supply with >54% power added efficiency (PAE).