The CMD231 is a wideband GaAs MMIC driver amplifier covering 2 to 6 GHz that offers high gain, single positive supply voltage, low current consumption, and small die size. It is ideally suited for communications systems needing small size and high linearity. The device operates from a +3 to +6 V supply. At 4 GHz, it delivers greater than 14.5 dB of gain with a corresponding output 1 dB compression point of +13.5 dBm and an output IP3 of 23.5 dBm.
RSS
GUI update available for the BNC model 7300 phase noise test system. Key performance features include broadband 5 MHz to 26.5 GHz complete with no additional hardware, absolute and additive noise measurement included in one system, fastest ATE measurements in the industry (< 200 ms complete) and pulse and AM measurements capable. The GUI can be updated by simply accepting the "Auto Update" notice feature.
Richardson RFPD Inc. announced the availability and full design support capabilities for a monolithic phase and amplitude controller (MPAC) from Peregrine Semiconductor Corporation. The PE46120 covers a frequency range of 1.8 GHz to 2.2 GHz and integrates a 90-degree hybrid splitter, digital phase shifters and a digital step attenuator (DSA), along with a low voltage CMOS serial interface. The MPAC is designed for precise phase and amplitude control of two independent RF paths.
The EDRO-1000 series dielectric resonator oscillator (DRO) utilizes advanced MIC and MMIC technology to generate precise, reliable and ultra-low noise frequency at microwave and mmWave bands up to 40 GHz. The uni-package is designed to mechanically withstand harsh environmental conditions due to shock/vibration, temperature and humidity. The devices are carefully matched for maximum power, minimum phase noise and voltage standing wave ratio (VSWR).
Skyworks Solutions Inc. launched SkyOne® Ultra 2.0, a highly integrated, single LTE SKU solution that solves harmonically-related carrier aggregation challenges through design while delivering the highest linear RF power as well as power added efficiency in the world. This next generation platform is a complete RF front-end system consisting of three LTE modules which utilize Skyworks' revolutionary SkyBlue™ technology in addition to a separate 2G transmitter.
RFMW Ltd. announces design and sales support for the Qorvo TGA2752-SM, QFN packaged 10 W power amplifier operating from 7.1 to 8.5 GHz. The TGA2752-SM provides 28 dB of gain and contains an integrated power detector. No external matching components are required, easing design in point to point amplifiers and C-band linear satellite communication systems.
RFMW Ltd. announces design and sales support for two Skyworks Inc. high power, PIN diodes suitable for T/R and attenuator applications. The SMP1331-085LF (shunt connected) and SMP1331-087LF (series connected) diodes are capable of handling 50 W CW power in a shunt connected switch configuration. Large signal attenuator applications ranging from 10 MHz to beyond 6 GHz are also possible. 
RFMW Ltd. announces design and sales support for a 10 W GaN power amplifier providing broadband coverage from 6 to 18 GHz. The Qorvo TGA2574 boasts 20 dB of small signal gain and operates from a 28 V supply drawing 1.5 A. PAE is >15%. The Qorvo TGA2574 serves EW, radar and instrumentation markets and provides world-class power / PAE / gain versus bandwidth. 
Smiths Interconnect’s TRAK Microwave brand's microstrip isolators integrate ferrite circulator/isolator substrates on printed circuit board (PCB) material providing for a high performance, yet economical, solution. They’re extremely well-matched devices with innovative integrated power terminations. Current solutions have been designed for popular mm-wave frequency bands. Model T001110 covers 29.6 to 30.6 GHz, and T001111 covers 34.5 to 35.5 GHz.
AR's 10000W1000A, class A solid state amplifier provides 10,000 W of output power from 80 to 1000 MHz. It has superior gain flatness, exceptional noise figure, great efficiency and low harmonics for EMC radiated susceptibility testing by using proprietary manufacturing and design techniques. So specify the 10000W1000A for the field strength you need.