San-tron produces rugged 7/16 DIN RF and microwave coaxial connectors (aka the 7-16 DIN connector) for applications requiring high-power transmission and extremely low intermodulation distortion (IMD), such as wired and wireless communications. Available as a weather-sealed coaxial cable connector, bulkhead-mount, or panel-mount receptacle, these durable 7/16 coaxial connectors incorporate a reliable, screw-type coupling mechanism.
RSS
Anritsu Company introduces the MS2840A signal analyzer that features broad frequency coverage of 9 kHz to 44.5 GHz and best-in-class close-in SSB phase noise performance. With the high-end performance and frequency coverage that can be extended to the millimeter wave (mmWave) range, the MS2840A is a highly accurate tool to conduct wideband and narrowband measurements on next-generation 4G/5G designs, microwave and mmWave wireless backhaul and more.
RFMW Ltd. announces design and sales support for the Qorvo TQL9093 ultra low noise amplifier featuring flat gain. Capable of operation from 600 to 4200 MHz, the TQL9093 is optimized for wireless infrastructure applications spanning 1500 to 4000 MHz and offers >19 dB of gain +/-0.5 dB over this span. Midband OIP3 is 41.5 dBm while noise figure is as low as 0.54 dB.
The LSS series of satellite simulators enable RF testing of mobile satellite communications systems without the need for cabling and with true portability for optimum equipment location. These simulators are fitted with dual polarized horn antennas in both the uplink and downlink bands and for each frequency conversion there is a separate attenuator providing adjustment of signal levels to accommodate receiver sensitivity and range distance.
System MS2010A is a high performance DC-18 GHz coaxial blocking matrix designed for high reliability, very low MTTR, and is available in configurations from 4 x 4 to 10 x 10 in an elegant and compact 2 RU unit. The company's new proprietary high reliability relay element coupled with its sophisticated rack-mount design gives you the performance and maintainability you demand.
RFMW Ltd. announces design and sales support for the Qorvo TQL9062, an internally matched, LNA gain block suitable for applications spanning 0.5 to 6 GHz. The TQL9062 features a ‘shutdown’ mode requiring 1.8 V TTL logic and supporting both TDD and FDD systems such as repeaters, DAS, defense communications and infrastructure applications where efficiency and range are important. Noise Figure is noted as 1.5 dB while mid-band gain is 15.5 dB and OIP3 is >40 dBm.
Skyworks is pleased to introduce two broadband, 75 Ohm MMIC front-end, low-noise amplifiers (LNAs) designed specifically for set-top box applications: the SKY65450-92LF (with bypass mode) and the SKY65452-92LF. These devices provide high linearity and excellent gain over a wide frequency range (40 MHz to 1 GHz) with minimal external components, enabling OEMs to leverage cost efficiencies through lower bill of materials.
Linear Technology Corp. introduces the LTC7813, a dual output (boost + buck), low quiescent current synchronous DC/DC controller. The LTC7813 operates from an input voltage of 4.5 to 60 V during start-up and maintains operation down to a 2.2 V input after start-up. The boost converter can produce an output voltage up to 60 V and the buck converter produces an output voltage ranging from 0.8 to 60V with the entire system achieving an efficiency as high as 98%.