We use cookies to provide you with a better experience. By continuing to browse the site you are agreeing to our use of cookies in accordance with our Privacy Policy.
MECA’s low PIM high power (300 W) couplers meet and exceed the industry standard of -161 dBc typical for all your DAS Application needs. Available in 3, 6,10, 20 and now 40 dB models and weatherproof IP 67 standard and IP 68 available Type N.
MECA offers a series of 2 W SMA right angle attenuators operating up to 4 GHz. The 662-dB-1RA series attenuators cover all wireless applications from Hz to 4.0 GHz and available in standard values as well as odd values from 0 thru 32 dB.
The MRFXF0024 Transformer is designed for applications that require very small, low cost, and highly reliable surface mount components. Applications may be found in broadband, wireless and other communications systems. These units are built lead-free and RoHS compliant and feature welded wire construction for increased reliability. S-Parameters are available on request.
RFMW Ltd. announces design and sales support for the 392P0000, 12 Amp pulsed switch from XSYSTOR Inc. The 392P0000 MOS type switch is placed between the drain choke of the GaN transistor and power supply. It works with XSYSTOR 100 and 200 series controllers to protect, operate, and modulate the GaN device. The unit is rated for drain voltages from 28 to 80 V with very-low Rds ON.
Passive Plus Inc. offers custom capacitor assemblies for high power requirements. Typical assemblies are configured in series and/or parallel combinations, producing higher voltage/current handling capabilities, extended capacitance range and tighter tolerances. PPI works with requesting engineers to determine best assembly for their applications.
Sumitomo Electric has added two GaN power amplifiers for X-Band radar applications. The F514 has a typical saturated output power of 350 W (>55 dBm) with 40 percent power-added efficiency and 10 dB power gain across 9.2 to 10.1 GHz. The F501 is a compact, surface-mount, hybrid module that can be used as the power amplifier (PA) in a phased array radar or as the driver for a higher power PA.
RFMW Ltd. announces design and sales support for a high isolation, absorptive switch. The Qorvo RFSW6024 supports WIFi, LTE, 4G and general purpose wireless infrastructure from 5 to 6000 MHz. This SPDT switch offers 60 dB of isolation at 2 GHz and IIP3 of 66 dBm. Absorptive, it can handle a max CW input of 36 dBm. Insertion loss is only 0.75 dB and switching speed is 250 nS.
Richardson RFPD Inc. announced the availability and full design support capabilities for the latest mXTEND™ SMT multiband antenna from Fractus, S.A. The Fractus mXTEND antenna boosters leverage Fractus’ Virtual Antenna™ technology to reduce design cycle times by replacing time-consuming, high-NRE custom antenna solutions with miniature, standard, off-the-shelf components.
Custom MMIC has added two unique distributed amplifiers to their performance leading standard product line. The CMD242 distributed amplifier features ultra-wideband performance from DC to 40 GHz while delivering 10.5 dB of gain with a flatness of +/- 1 dB. The CMD244 distributed driver amplifier covers DC to 24 GHz, with a unique positive gain slope over frequency range.
The RFSP5722 splitter is designed for applications that require small, low cost, and highly reliable surface mount components. Applications may be found in broadband, wireless, and other communications systems. These units are built lead-free and RoHS compliant. S-Parameters are available on request.
RSS
MECA’s low PIM high power (300 W) couplers meet and exceed the industry standard of -161 dBc typical for all your DAS Application needs. Available in 3, 6,10, 20 and now 40 dB models and weatherproof IP 67 standard and IP 68 available Type N.
The MRFXF0024 Transformer is designed for applications that require very small, low cost, and highly reliable surface mount components. Applications may be found in broadband, wireless and other communications systems. These units are built lead-free and RoHS compliant and feature welded wire construction for increased reliability. S-Parameters are available on request.
RFMW Ltd. announces design and sales support for the 392P0000, 12 Amp pulsed switch from XSYSTOR Inc. The 392P0000 MOS type switch is placed between the drain choke of the GaN transistor and power supply. It works with XSYSTOR 100 and 200 series controllers to protect, operate, and modulate the GaN device. The unit is rated for drain voltages from 28 to 80 V with very-low Rds ON.
Passive Plus Inc. offers custom capacitor assemblies for high power requirements. Typical assemblies are configured in series and/or parallel combinations, producing higher voltage/current handling capabilities, extended capacitance range and tighter tolerances. PPI works with requesting engineers to determine best assembly for their applications.
Richardson RFPD Inc. announced the availability and full design support capabilities for the latest mXTEND™ SMT multiband antenna from Fractus, S.A. The Fractus mXTEND antenna boosters leverage Fractus’ Virtual Antenna™ technology to reduce design cycle times by replacing time-consuming, high-NRE custom antenna solutions with miniature, standard, off-the-shelf components.
Custom MMIC has added two unique distributed amplifiers to their performance leading standard product line. The CMD242 distributed amplifier features ultra-wideband performance from DC to 40 GHz while delivering 10.5 dB of gain with a flatness of +/- 1 dB. The CMD244 distributed driver amplifier covers DC to 24 GHz, with a unique positive gain slope over frequency range.