We use cookies to provide you with a better experience. By continuing to browse the site you are agreeing to our use of cookies in accordance with our Privacy Policy.
M/A-COM Technology Solutions announces new additions to family of voltage controlled oscillators. The VCOs deliver low phase noise, wide tuning range, and low current consumption.
Hittite Microwave Corp. offers a wideband GaAs pHEMT MMIC Distributed Power Amplifier die which is ideal for military EW, test & measurement equipment, and broadband telecom equipment applications up to 48 GHz. HMC1022 is a 0.25 W GaAs pHEMT MMIC amplifier which operates between DC and 48 GHz.
Skyworks Solutions, Inc. has introduced two small (1 x 1 mm packaged) GaAs single-pole, double-throw (SPDT) switches for WLAN applications. The SKY13366-378LF (2.0-6.0 GHz) and the SKY13350-385LF (0.8-6.0 GHz) switches target low power WLAN consumer premise device equipment.
Skyworks Solutions has introduced a new single stage GaAs PHEMT LNA that offers low noise figure (0.60 dB), very high linearity (23 dBm IIP3), and excellent return loss (14 dB) in a small 2 x 2 mm DFN package. On-die active bias design ensures consistent performance and enables unconditional stability.
Narda, an L-3 Communications company, has introduced the 4436 family of RF power dividers that operate from 500 MHz to 8 GHz and are available in two-way, three-way, four-way, and eight-way versions. The power dividers are a cost-effective solution for commercial and defense applications.
Hittite announces the release of the HMC6383 , a high-performance, flexible, direct conversion receiver (DCR) radio design platform that can be configured on-the-fly. Fully field programmable, the HMC6383 platform is designed to serve as a receiver subsystem building block for various applications including cellular basestations, microwave radio, adaptive IF strips, wireless LAN, software defined radio and test equipment.
Model PEC3-40-2G6G-15LM-SFF-HS is a temperature compensated, limiting amplifier that operates over the 1.85 to 6.25 GHz frequency range and provides a limited power output of +15 dBm minimum for an input power range of -15 to +17 dBm.
Florida RF Labs has introduced a high performance, flange mounted, 800 W termination. The 32M7200F offers outstanding performance and low VSWR and the convenience of bolt on installation. This termination has been optimized for performance in the DC-0.5 GHz frequency range.
The HLNAV-360 is a low noise amplifier with integrated isolators at the input and output ports. The LNA operates over the 57 to 64 GHz frequency band with 27 dB gain, noise figure of 6.0 Db and a P1dB of +12 dBm. RF interfaces are via WR-15 waveguide with standard UG-385/U flanges.
RSS
Hittite Microwave Corp. offers a wideband GaAs pHEMT MMIC Distributed Power Amplifier die which is ideal for military EW, test & measurement equipment, and broadband telecom equipment applications up to 48 GHz. HMC1022 is a 0.25 W GaAs pHEMT MMIC amplifier which operates between DC and 48 GHz.
Skyworks Solutions, Inc. has introduced two small (1 x 1 mm packaged) GaAs single-pole, double-throw (SPDT) switches for WLAN applications. The SKY13366-378LF (2.0-6.0 GHz) and the SKY13350-385LF (0.8-6.0 GHz) switches target low power WLAN consumer premise device equipment.
Skyworks Solutions has introduced a new single stage GaAs PHEMT LNA that offers low noise figure (0.60 dB), very high linearity (23 dBm IIP3), and excellent return loss (14 dB) in a small 2 x 2 mm DFN package. On-die active bias design ensures consistent performance and enables unconditional stability. 
Narda, an L-3 Communications company, has introduced the 4436 family of RF power dividers that operate from 500 MHz to 8 GHz and are available in two-way, three-way, four-way, and eight-way versions. The power dividers are a cost-effective solution for commercial and defense applications.
Hittite announces the release of the HMC6383 , a high-performance, flexible, direct conversion receiver (DCR) radio design platform that can be configured on-the-fly. Fully field programmable, the HMC6383 platform is designed to serve as a receiver subsystem building block for various applications including cellular basestations, microwave radio, adaptive IF strips, wireless LAN, software defined radio and test equipment..webp?height=200&t=1624021732&width=200 "PEC3-40-2G6G-15LM-SFF-HS-(002).jpg")
Florida RF Labs has introduced a high performance, flange mounted, 800 W termination. The 32M7200F offers outstanding performance and low VSWR and the convenience of bolt on installation. This termination has been optimized for performance in the DC-0.5 GHz frequency range.
The HLNAV-360 is a low noise amplifier with integrated isolators at the input and output ports. The LNA operates over the 57 to 64 GHz frequency band with 27 dB gain, noise figure of 6.0 Db and a P1dB of +12 dBm. RF interfaces are via WR-15 waveguide with standard UG-385/U flanges.