We use cookies to provide you with a better experience. By continuing to browse the site you are agreeing to our use of cookies in accordance with our Privacy Policy.
MITEQ Inc. introduces Model AMF-4D-02002650-90-20P to its family of rugged, single bias ultra-broadband coaxial amplifiers. This amplifier has over 25 dB of gain from 2.0 to 26.5 GHz, in a housing that is only 1" long and 0.83" wide without the field replaceable 2.92 mm connectors.
MITEQ’s new Model DA40218LC7, four-channel downconverter, integrates our standard broadband double-balanced mixer designs and IF amplifiers to provide a phase and amplitude tracked 4-channel downconverter with an integrated LO distribution network. This unit can be used for basic direction finding experiments with four antennas.
PMI Model No. P8T-0R1G20G-110-T-512-SFF is a high speed, single pole, eight throw, absorptive switch capable of switching within 300 nsec. The frequency range is 0.1 to 20.0 GHz and has over 110 dB of isolation.
Anritsu introduces PIM Master™ model for UMTS band VIII and LTE band 8 networks. The MW8209A brings inherent advantages of PIM Master, including distance-to-PIM technology, to E-GSM 900 MHz band.
Weinschel’s Model 4201-63 MMIC digital attenuator operates over the 0.4 to 6 GHz frequency range and provides an attenuation range from 0 to 63 dB in 1 dB increments. This attenuator has excellent repeatability and performance with built-in TTL interface.
This model is a coaxial and compact Ka-Band line amplifier. This LNA has over 35 dB of gain from 17.7 to 22.0 GHz, in a housing that is only 0.72” long and 0.75” wide
MITEQ Model AMF-2F-00020050-20-28P is a new addition to its family of low noise, wideband, and ultra-small coaxial LNAs in the 20 to 500 MHz band. This LNA has over 35 dB of gain in a housing that is only 1.22” long and 0.88” wide without the field-replaceable SMA connectors that are mounted on a removable heatsink. Gain flatness is a maximum of ±1.75 dB, though typical is ±1.0 dB.
The Giga-tronics ASCOR Series 8000 and 8800 has a flexible and versatile design making it an ideal platform for standard and tailored switching solutions and RF Interface Units (RFIUs). It is geared to control any of the various switch types and enable them to be mounted on the front or rear panel or host switching and signal conditioning components internally.
RSS
0.7 to 18 GHz dual band, solid state amplifiers.
MITEQ Inc. introduces Model AMF-4D-02002650-90-20P to its family of rugged, single bias ultra-broadband coaxial amplifiers. This amplifier has over 25 dB of gain from 2.0 to 26.5 GHz, in a housing that is only 1" long and 0.83" wide without the field replaceable 2.92 mm connectors.
MITEQ’s new Model DA40218LC7, four-channel downconverter, integrates our standard broadband double-balanced mixer designs and IF amplifiers to provide a phase and amplitude tracked 4-channel downconverter with an integrated LO distribution network. This unit can be used for basic direction finding experiments with four antennas.
Anritsu introduces PIM Master™ model for UMTS band VIII and LTE band 8 networks. The MW8209A brings inherent advantages of PIM Master, including distance-to-PIM technology, to E-GSM 900 MHz band.
Weinschel’s Model 4201-63 MMIC digital attenuator operates over the 0.4 to 6 GHz frequency range and provides an attenuation range from 0 to 63 dB in 1 dB increments. This attenuator has excellent repeatability and performance with built-in TTL interface.
MITEQ Model AMF-2F-00020050-20-28P is a new addition to its family of low noise, wideband, and ultra-small coaxial LNAs in the 20 to 500 MHz band. This LNA has over 35 dB of gain in a housing that is only 1.22” long and 0.88” wide without the field-replaceable SMA connectors that are mounted on a removable heatsink. Gain flatness is a maximum of ±1.75 dB, though typical is ±1.0 dB.
The Giga-tronics ASCOR Series 8000 and 8800 has a flexible and versatile design making it an ideal platform for standard and tailored switching solutions and RF Interface Units (RFIUs). It is geared to control any of the various switch types and enable them to be mounted on the front or rear panel or host switching and signal conditioning components internally.