We use cookies to provide you with a better experience. By continuing to browse the site you are agreeing to our use of cookies in accordance with our Privacy Policy.
PMI Model ERDLVA-218-CW-LPD is a CW Immune, Extended Range Detector Logarithmic Video Amplifier (ERDLVA) designed for ultra low DC power consumption. This model operates over the 2 to 18 GHz frequency range and has the ability to interface with an output cable measuring over 100 feet in length.
Florida RF Labs has expanded the HybriX® coupler product line with the introduction of a new X-band hybrid coupler, HPX2F. With operating frequency of 8 to 12 GHz, HPX2F is the world’s first multi-layered PTFE coupler designed for X-band applications including satellite, radar, point-to-point radio, and telemetry.
Narda Safety Test Systems, an L-3 Communications company, introduced two portable instruments designed exclusively for measurement of electromagnetic fields found in industrial environments such as RF heat sealers and vinyl welders, semiconductor fabrication equipment, RF induction, dielectric dryers and heaters, and plasma generation systems.
NIC introduces a 902 to 928 MHz Cavity filter offering high performance for ISM base station applications. This filter provides low Insertion loss of <1.5 dB and 45 dB rejection in the cellular band of 824 to 894 MHz and GSM band of 936 to 960 MHz.
Anritsu Co. introduces software for its MS269xA and MS2830A series Signal Analyzers, as well as its MG3700A Vector Signal Generator to create single-instrument solutions that support the IEEE 802.11n/p/a/b/g/j wireless LAN (WLAN) standards.
Renaissance Electronics has designed an in-band duplexer for LTE cell site applications. In a very compact footprint of 4.75” x 3.15”, the duplexer provides 30 dB of rejection between the Tx and Rx. The insertion loss is less than 1 dB.
RSS
PMI Model ERDLVA-218-CW-LPD is a CW Immune, Extended Range Detector Logarithmic Video Amplifier (ERDLVA) designed for ultra low DC power consumption. This model operates over the 2 to 18 GHz frequency range and has the ability to interface with an output cable measuring over 100 feet in length.
Florida RF Labs has expanded the HybriX® coupler product line with the introduction of a new X-band hybrid coupler, HPX2F. With operating frequency of 8 to 12 GHz, HPX2F is the world’s first multi-layered PTFE coupler designed for X-band applications including satellite, radar, point-to-point radio, and telemetry.
NIC introduces a 902 to 928 MHz Cavity filter offering high performance for ISM base station applications. This filter provides low Insertion loss of <1.5 dB and 45 dB rejection in the cellular band of 824 to 894 MHz and GSM band of 936 to 960 MHz.
Anritsu Co. introduces software for its MS269xA and MS2830A series Signal Analyzers, as well as its MG3700A Vector Signal Generator to create single-instrument solutions that support the IEEE 802.11n/p/a/b/g/j wireless LAN (WLAN) standards.
Renaissance Electronics has designed an in-band duplexer for LTE cell site applications. In a very compact footprint of 4.75” x 3.15”, the duplexer provides 30 dB of rejection between the Tx and Rx. The insertion loss is less than 1 dB.
