AR's new 10000TP8G10 TWT pulsed amplifier produces 10,000 W of peak output power over the 8 to 10 GHz frequency range with 70 dB gain for various EMC and microwave testing applications. Standard features include a built-in IEEE-488 (GPIB) interface, TTL gating, VSWR protection, gain control, RF output sample ports, auto sleep, plus various monitoring circuits.
RSS
RFMW Ltd. announces design and sales support for TriQuint’s TAT7460B1A, linear, 75-ohm, CATV amplifier. Designed for use from 50 to 2600 MHz, the TAT7460B1A addresses CATV and Satellite bands in a single part. 17 dB of gain is available from this 5 V, 100 mA amplifier which offers noise figure of 3 dBm up to 1600 MHz.
Model SBL-7531142240-1010-S1 is a W band low noise amplifier covering entire W-band from 75 to 110 GHz . The amplifier exhibits more than 20 dB small signal gain with ± 1.5 dB gain flatness and around 4.0 dB noise figure. The output P-1 dB of the amplifier is around 0 dBm typical and it draws 30 mA current from a single DC power supply in the range of +5 to +12 volts.
Pasternack’s new X band high gain power amplifiers are packaged in a hermetically-sealed metal enclosures and exhibit outstanding performance in high gain, gain flatness, high linearity and wide dynamic range. The new X band high gain power amplifiers from Pasternack are perfectly suited for high linearity applications with frequencies ranging from 8 to 12 GHz.
Richardson RFPD Inc. announces immediate availability and full design support capabilities for a select group of new low-cost products for wireless infrastructure and Aerospace & Defense applications from Skyworks Solutions, Inc. Devices include LNAs with ultra-low noise figures of 0.23 dB, as well as PAs offering 2 W P1 dB and +25 dBm linear Pout, and switches handling up to 150 W input power.
RFMW Ltd. announces design and sales support fortwo S-band power amplifiers from TriQuint. The TGA2583 and TGA2585 cover the frequency range of 2.7 to 3.7 GHz with 10 and 18 W of saturated output power respectively. Both TriQuint devices offer power added efficiency of 54% with a small signal gain of 33 dB.
HLNA Series of low noise amplifiers covers the frequency ranges from 20 to 100+ GHz. A wide variety of gain and bandwidth combinations are available to provide the designer with a solution for most applications. Custom designs are available and in many cases NRE is not required. MMIC technology is employed for high reliability and repeatability.
The AE14625-15250DB5370-LNA combines a high-performance duplexer with a low-noise amplifier with excellent noise performance in a compact module. The duplexer’s band 1 is 14.4 to 14.83 GHz, band 2 is 15.15 to 15.35 GHz, insertion loss is less than 2 dB, rejection is at least 60 dB, and power handling ability is 150 W.
RFMW Ltd. announces design and sales support forthe TGA2594, a 5 W high-power amplifier developed using TriQuint’s GaN15 technology. Supporting VSAT and SATCOM applications, the TriQuint TGA2594 offers 35 dBm P1 db or 37 dBm Psat from 27 to 31 GHz. Small signal gain is up to 23 dB. 
PMI Model No. PE2-30-9R010R0-2R5-21-12-SFF is a low noise amplifier that operates over the 9.0 to 10.0 GHz frequency range. This model provides a typical gain of 30 dB while maintaining a noise figure of 2.5 dB and a OP1 dB of 21 dBm minimum. The input and output VSWR is better than 2.0:1 and this model operates on +12 to +15 VDC.