PMI Model No. P1T-26D532D5-90-1212-292FF is an absorptive, single pole, single throw, solid-state switch that operates over the frequency range of 26.5 to 32.5 GHz. This model provides a minimum isolation of 90 dB and maintains low insertion loss of 5.0 dB maximum. The VSWR is 2.0:1 maximum into 50 ohms impedance and offers switching speeds of 25 nsec maximum and 15 nsec typical.
RSS
Linear Technology announces the LTC3646, a 40 V input capable synchronous buck converter than can deliver up to 1 A of continuous output current from a 3 mm x 4 mm DFN-14 (or thermally enhanced MSOP16) package. It operates from an input voltage range of 4 to 40 V, making it ideal for automotive and industrial applications that require high voltage input capability.
PMI Model No. PEC2-60-4G8G-1R75-14-12-SFF is a 4 to 8 GHz low noise amplifier that typically provides 60 dB of gain. The gain flatness is ±1.25 dB maximum with a noise figure is 1.75 dB maximum. This amplifier provides a minimum OP1 dB of +14 dBm.
PMI Model No. PE2-30-0R56R0-5R0-22-12-SFF is a 500 MHz to 6.0 GHz low noise amplifier that typically provides 30 dB of gain. The gain flatness is ±1.0 dB maximum with a noise figure is 5.0 dB typical. This amplifier provides a minimum OP1 dB of +21 dBm.
PMI Model No. PE2-28-20R040R0-5R5-18-12-SFF is a 20 to 40GHz low noise amplifier that typically provides 28 dB of gain. The gain flatness is ±2.5 dB maximum and ±1.5 dB typical with a noise figure is 5.5 dB typical. This amplifier provides a minimum OP1 dB of +15 dBm minimum.
PMI Model No. PS-360-900M930M-6-SFF is a 900 to 930 MHz, 6-BIT digitally controlled phase shifter having a LSB of 5.6 degrees. The insertion loss is 7 dB typical, 7.5 dB maximum with a typical VSWR of 2.0:1. This is a high speed phase shifter that can switch from one phase state to the next in typically 250 nsec.
PMI Model LM-6D7G7D9G-30W-SFF is a RF limiter that operates in the 6.7 to 7.9 GHz frequency range. This limiter can handle 30 W CW input power and provides a maximum leakage of +18 dBm. This model has a low insertion loss of 1.1 dB maximum and a recovery time of 10 usec maximum.
PMI Model No. P4T-10G40G-60-T-GPO is a single pole, four throw, absorptive, solid-state switch that operated over the frequency range of 10 to 40 GHz. This model provides over 60 dB of isolation and has an insertion loss of 6 dB maximum. The VSWR is better than 2.0:1 into 50 ohm impedance.
Renaissance Electronics has developed a new low loss, high isolation waveguide isolator for Satcom applications that covers 20.2 to 21.2 GHz with industry standard interface of WR 42. With loss of 0.2 dB and 26 dB isolation, it is ideal for low noise figure Satcom receivers.
MITEQ introduces a new high reliability fiber optic transmitter with an operating bandwidth to 6 GHz. Transmitter Model number HRT-50K6G-28-20-M14 has a noise figure of 12 dB and is available in three different optical wavelengths (1550, 1490, 1310 nm). The operating temperature range is -40 to +85° C.