Renaissance Electronics Corporation’s System Group has designed a dual 48 x 4 switch matrix for ATE applications that can cover from 700 MHz (LTE) to 6 GHz (Wi-Fi) frequencies. Using high reliability solid state switches, the switching speed is on the order of nanoseconds helping test handsets and other portable communication devices with minimum delay time.
RSS
PMI Model No. PUB-14-30M20G-14-LCA is a 30 MHz to 20.0 GHz low noise amplifier which provides 14 dB of gain while maintaining a gain flatness of ±1.2 dB typically over the operating frequency. The noise figure is 3 dB typical and offers an OP1 dB of +14 dBm typical.
PMI Model No. PE2-30-218-4R0-20-12-SFF-BT is a 2.0 to 18.0GHz low noise amplifier that has an integrated bias-tee network on the output port. This amplifier provides 30 dB of gain while maintaining a maximum gain flatness of ±2.0 dB max over the operating frequency.
KRYTAR Inc. announces the addition of two new models offering 10 dB nominal coupling over the ultra-broadband frequency range of 2 to 40 GHz, each in a single, compact and lightweight package.
Renaissance has recently manufactured a 50 kW peak power circulator that can sustain 300 W CW operating at 775 to 920 MHz. The input and output connectors are 7/8” EIA and the third port has a HN connector.
Renaissance's 3SLE2NAJ is a compact surface mount (0.394 sq-inch footprint) that covers 420 to 450 MHz. With a low insertion loss of 0.8 dB and isolation exceeding 15 dB over 0 to 55 C, it is ideal for short range PA system applications.
In an effort to address customer inputs and in the spirit of our commitment to continuous improvement, the Renaissance/HXI extremely low latency GigaLink LightSpeed radio link has been improved for ease of deployment and increased range performance.
Renaissance’s new broadband circulator is ideal for transmitter protection application. Operating over 962 to 1213 MHz, this device can withstand 2000 W peak and 20 W average power levels. It is designed to sustain temperatures from -55 to +120 C while the loss is maintained below 0.5 dB.
Renaissance has designed a Ka band microstrip isolator that can handle 2W forward and reverse for satcom applications. It is designed with a compact size of 5 x 6 mm case. It provides low insertion loss in the forward direction and high isolation in the reverse.
The HGM and HGV series Gunn Oscillators cover the 7 to 150 GHz frequency range. A wide variety of designs provide solutions for most applications. Units are available with mechanical and/or electrical tuning, providing many possible tuning configurations.