PMI Model No. P4T-10G40G-60-T-GPO is a single pole, four throw, absorptive, solid-state switch that operated over the frequency range of 10 to 40 GHz. This model provides over 60 dB of isolation and has an insertion loss of 6 dB maximum. The VSWR is better than 2.0:1 into 50 ohm impedance.
This model is designed to handle operating input power levels up to 200 mW (+23 dBm CW) and has a maximum switching speed of 30 nsec typical. This switch is supplied with GPO connectors at all RF ports. The housing is radial and measures 1.25" x 1.25" x 0.5".
Features:
- Low Insertion Loss
- High Isolation
- Fast Switching Speed
- Small Size
Specifications:
|
Frequency |
10.0 to 40.0GHz |
|
Isolation |
60dB min. |
|
Insertion Loss |
6.0dB max. |
|
Insertion Loss Flatness |
±1dB typical over full band |
|
VSWR In/Out |
2.0:1 max. |
|
Input Power |
200mW CW max. (+23dBm CW) |
|
Switching Speed (10% to 90% RF) |
30nsec typ. |
|
DC Voltage and Current |
+5VDC @ 75mA typical -5VDC @ 45mA typical |
|
Control Signal |
2-BIt Decoded TTL Logic |
|
RF Connectors |
GPO - Limited Detent |
|
DC & Control |
Solder Pins |
|
Size |
1.25" x 1.25" x 0.5" |
|
Finish |
Gold Plated |
Environmental Ratings:
|
Temperature: |
-55ºC to +85 ºC Operating |
|
-65ºC to +125 ºC Non-Operating |
|
|
Humidity: |
MIL-STD-202F, Method 103B Cond. B |
|
Shock: |
MIL-STD-202F, Method 213B Cond. B |
|
Vibration: |
MIL-STD-202F, Method 204D Cond. B |
|
Altitude: |
MIL-STD-202F, Method 105C Cond. B |
|
Temperature Cycle: |
MIL-STD-202F, Method 107D Cond. A |
