Products

RSS

Full service custom manufacturer of hermetic glass-to-metal sealed housings, connectors, feedthroughs, and precision assemblies.

Empower's 1205/BBM3K5OEL is suitable for broadband mobile jamming, communications, general test and band-specific applications from 500 to 2700 MHz. This compact module utilizes high-power advanced GaN devices that provide excellent power density, high efficiency, wide dynamic range and low distortion.

RFMW Ltd. announces design and sales support for Smiths Interconnect “Outrigger” resistors. The CRH04091005F is a 100 ohm resistor capable of handling 1 W CW and up to 10 W of pulsed RF power yet measures only 1.02 x 2.29 mm. 

Anritsu Corporation announces that Huawei has endorsed Anritsu’s MT8870A high speed wireless test platform for its RF calibration and validation tests. The Universal Wireless Test Set provides support for the Hi2110 and Hi2115 NB-IoT chipsets. 

RFMW Ltd. announces support for a balanced amplifier module with embedded hybrid couplers. The Qorvo QPA9807 offers single ended input and output ports with very good return loss and incorporates and enable pin to shut down the amplifier for improved receive sensitivity. 

Eclipta ECL  connector series addresses the medical market need for a reliable interconnect system with short lead-time and minimal cost. Eclipta connector incorporates an innovative, double-ended, edge card contact system featuring a PCB as the contact on the disposable connector side.

PMI Model No. LM-100M20G-18-10W-SFF is a 10 W peak, 1 W CW Limiter that operates over the 0.1 to 20.0 GHz frequency range.  This model offers a maximum insertion loss of 2.0 dB and a maximum VSWR of 2.0:1. The unit is supplied with SMA female connectors in an ultra small housing measuring only 0.50" x 0.50" x 0.22". 

PMI Model No. PE2-16-300M20G-1R7-15-12-SFF is a low noise amplifier that works from 300 MHz to 20 GHz. This amplifier has a very low noise figure over this broad frequency range. This low noise amplifier provides 16 dB of small signal gain while requiring only a single supply of +12 V. The P1dB output power of 15 dBm allows this low noise amplifier to function as a lo driver for balanced, I/Q or image reject.

MECA Electronics’ latest product offering, 4-way compact broadband of power dividers covering 0.500 to 6.000 GHz (804-2-3.250) encompassing Public Safety through ISM bands. With typical performance of; VSWR’s of 1.30:1 & 1.25:1, Isolation 21 dB, Insertion Loss 1.5 dB and exceptional Amplitude & Phase Balance of 0.6dB and 10 degrees max.  

MECA Electronics’ latest product offering, 2-way compact broadband of power dividers covering 0.500 to 6.000 GHz (802-6-3.250) encompassing Public Safety through ISM bands. With typical performance of; VSWR’s of 1.20:1 & 1.25:1, Isolation 22 dB, Insertion Loss 0.6 dB and exceptional Amplitude & Phase Balance of 0.3 dB & 5 degrees max.