- Buyers Guide
Crane Aerospace & Electronics, a segment of Crane Co. (NYSE: CR), is a major supplier of systems and components for critical aerospace and defense applications. These systems and components are designed for some of the toughest environments - including ground based, airborne and space flight environments. Product and service offerings are organized in solution sets and include power, microwave and microelectronics. We design and manufacture high-density, high-reliability electronics for aerospace, including unmanned vehicles, space, military, medical, industrial and commercial applications. Products are manufactured under the brand names Keltec, Merrimac, Signal Technology, Interpoint and ELDEC.
Crane Aerospace & Electronics introduces its Interpoint® MFX SeriesTM 50 W DC-DC converter. The newly designed MFX Series provides up to 50 W in a 0.92 cubic inch case with efficiency over 90%. The input voltage of 16 to 50 volts can also withstand transients of 80 volts for one second, has ±10% trimmable 3.3 and 5 volt outputs and operates -55°C to +125°C.Read More
Crane’s proven sensor and switch family are used on multiple applications, including landing gear, doors, secondary flight controls and thrust reversers. Crane’s sensors have recently been chosen for several engine nacelle applications, including fan cowl latch and thrust reverser sensing for Trent XWB, LEAP-1A and PurePower 1100 G engines for A350 XWB and A320 neo aircraft, respectively.Read More
Crane Aerospace & Electronics Microwave Solutions announced the re-launched microwave space qualified products (MSQP) product line. This line offers a range of standard passive products including power dividers, hybrids, couplers and mixers. These products have been previously qualified to internally generated standards derived from industry standards.Read More
Crane Electronics features a new broadband high performance frequency synthesizer. Offering frequency coverage from 2 to 20 GHz, the unit also provides exceptional phase noise performance meeting -73 dBc/Hz at 10 KHz offset for a 9 GHz output frequency. The unit is designed for demanding defense applications.Read More
Crane Electronics offers products built using the unique Multi-Mix® stripline fabrication process. This provides the ability to provide very controlled dielectric properties surrounding the RF conductors resulting in predictable and controllable RF performance results. This process is ideal for complex routing circuits, multi-filter structures, beamformers and complex RF structures.Read More
Crane Aerospace & Electronics, Power Solutions, will be supplying ELDEC® Power Conditioning Modules (PCM) to provide flight critical and reliable power management and conversion for the Honeywell Flight Control Electronics (FCE) supplied to COMAC.Read More
Crane Aerospace & Electronics introduced four new Interpoint® products at electronica 2014 – MFK Series™ 25 W, MTR 50 Series™ 30 W, MFX Series™ 50 W and MWR SeriesTM 35 watt dc to dc converters.Read More
Crane Aerospace & Electronics, Power Solutions has been selected by BAE Systems to provide ELDEC®Power Conditioning Modules (PCMs) and batteries on the Boeing 777X.Read More
Crane Aerospace & Electronics, a segment of Crane Co., announced the appointment of Mike Clark to senior director of microwave solutions of the electronics group.Read More
Crane Aerospace & Electronics, a segment of Crane Co., has announced the appointment of Steve Barr as Vice President of Operations of the Electronics Group of Crane Aerospace & Electronics. In his role, Barr is responsible for Operations and Supply Chain for all of Electronics Group locations, including Beverly, Massachusetts, Chandler, Arizona, Ft. Walton Beach, FL, Redmond, WA, West Caldwell, New Jersey and Kaohsiung, Taiwan. He will be located in Redmond, WA.Read More
Crane Aerospace & Electronics Microwave Solution launches its new Ku-Band Iso-Divider product line designed for use in satellite applications. This unit combines the functions of high performance power dividers with ferrite isolators to provide a high isolation power divider solution, making the external isolators redundant, for satellite receiver applications, without introducing complex switchbased solutions. Integration of the two functions into a single package provides enhanced product reliability due to fewer external components, interconnects and transitions.Read More
Crane Aerospace & Electronics announced a series of enhancements to its popular MTR Series of 30 watt, high reliability dc-dc converters. According to Ed Fuhr, vice president of power solutions, “the MTR Series was enhanced to provide broader compliance to industry standards and in support of more application requirements of its global users.”Read More
Crane Aerospace & Electronics announced the introduction of a new, down-leaded version of its Interpoint MFP Series Point of Load (POL) converters. This new version, available in both flanged and non-flanged packages, is a single output 16 watt dc-dc converter providing output voltages from 0.64 to 3.5 V from a source voltage of 3 to 6 V with up to 90 percent efficiency.Read More
Crane Aerospace & Electronics, Power Solutions expands its list of products for immediate delivery. The FMCE Series™ are the next-generation.Read More
Crane Co., a diversified manufacturer of highly engineered industrial products,announced that Eric C. Fast, chief executive officer, will retire from Crane Co. in January 2014. Fast joined Crane in 1999 as president and chief operating officer and was promoted to chief executive officer in January 2001. He will be succeeded by Max H. Mitchell, currently president and chief operating officer.Read More
Crane Aerospace & Electronics, a segment of Crane Co., has announced the appointment of Todd Witchall as vice president of finance and chief financial officer of the Electronics Group of Crane Aerospace & Electronics. In this role, Witchall will report directly to Bob Tavares, president of Crane Electronics Group.Read More
Crane Aerospace & Electronics, a segment of Crane Co., has announced the appointment of Greg Gomez-Cornejo as vice president of operations of the Electronics Group of Crane Aerospace & Electronics. In his role, Gomez-Cornejo is responsible for operations and supply chain for all of Electronics Group locations, including Beverly, Massachusetts, Chandler, Arizona, Ft. Walton Beach, FL, Redmond, WA, West Caldwell, New Jersey, Kaohsiung, Taiwan and San Jose, Costa Rica. He will be located in Redmond, WA.Read More
Crane Aerospace & Electronics, a segment of Crane Co., has announced the appointment of Bob Ferrante as vice president of the microwave solution of the electronics group of Crane Aerospace & Electronics. In his role, Ferrante is responsible for operations of all electronics group microwave solutions locations, including Beverly, MA, Chandler, AZ, West Caldwell, NJ and San Jose, Costa Rica. He will be located in West Caldwell, NJ.Read More
Crane Aerospace & Electronics, a segment of Crane Co., hosted a meeting and facility tour with Rep. Rick Larson, WA -02, on July 27 at the Lynnwood, WA site. Larsen was interested in learning more about Crane, Crane’s involvement in the community, and Crane’s opportunities and needs in the aerospace and defense industry, especially since Crane will be part of the newly-defined second district.Read More
Your request will be e-mailed directly to the company who will follow up with the requested information. This request is for legitimate sales inquires only – please do not submit promotions, solicitations or spam.
Get access to premium content and e-newsletters by registering on the web site. You can also subscribe to Microwave Journal magazine.