We use cookies to provide you with a better experience. By continuing to browse the site you are agreeing to our use of cookies in accordance with our Privacy Policy.
PMI Model No. PEC2-2G18G-80DB-21DBM-LM-SFF is a 2.0 to 18.0 GHz, limiting amplifier that provides a limited output power level of +21 to +25 dBm for an input power range of -55 to +10 dBm CW. This model has output power level versus frequency compensation such that the limited output power has a flat frequency response. This unit is supplied with SMA(F) connectors in a small housing measuring only 2.98" x 0.78" x 0.26".
PMI Model No. DTA-500M2G-64-10B-SFF is a 10-Bit programmable 64 dB pin diode attenuator with step resolution as low as 0.06 dB over the frequency range of 0.5 to 2.0 GHz. Specificatins include frequency rang for 0.5 to 2.0 GHz, Insertion loss 2.7 dB max and VSWR 2.0:1 max. The DTA-500M2G-64-10B-SFF enviromental temperature is -54°C to +85°C operating and -65°C to +125°C non-operating.
PMI Model No. P4T-500M18G-80-T-515-SFF-2W-IND is a single pole, four throw, absorptive switch. This switch offers 80 dB of isolation and a maximum insertion loss of 6.0 dB. It has a maximum switching speed of 200 ns with individual TTL control. The operating power is +33 dBm CW max and the VSWR is 2.0:1 maximum.
Linear Technology Corp. announces the LTC3892, a high voltage dual output synchronous step-down DC/DC controller that draws only 29 µA when one output is active and 34 µA when both outputs are enabled. The 4.5 to 60 V input supply range is designed to protect against high voltage transients, ensuring continuous operation during automotive cold crank and to accommodate a broad range of input sources and battery chemistries.
Skyworks introduces a step-up, three-channel LED driver with an I2C interface and pulse width modulation dimming control, offering 10-bit dimming accuracy down to 0%. The SKY82896 features a wide input voltage range of 2.5 to 5.5 V and high-boost switching frequency. Minimal external components reduce the solution size and make the device suitable for LED backlighting in single-cell, Li-Ion battery-based applications.
Skyworks introduces eight low noise, variable gain receive modules for LTE and WCDMA infrastructure applications requiring low noise and high linearity. The SKY65369-11, SKY65370-11, SKY65371-11, SKY65372-11, SKY65373-11, SKY65374-11, SKY65375-11, and SKY65376-11, which are ideal for all wireless infrastructure OEMs and ODMs, are low noise, highly linear VGA modules that operate in the 700 to 2600 MHz range and feature very low return loss.
RFMW Ltd. announces design and sales support for NXP’s BLF2425M7LS-250P. This highly efficient (51% drain efficiency) LDMOS transistor is internally matched for broadband performance from 2400 to 2500 MHz, supporting ISM (industrial, scientific and medical) applications. Featuring 15 dB of gain, the NXP BLF2425M7LS-250P runs off a 28 V supply.
Richardson RFPD Inc. announced the availability and full design support capabilities for a new RF switch from M/A-COM Technology Solutions. The MASW-011055 is a high power PIN diode SP2T switch in a common anode configuration, operating from 30 MHz to 3 GHz. It features low insertion loss and excellent linearity and is capable of handling 100 W CW incident power at a base plate temperature of 85ºC.
RFMW Ltd. announces design and sales support for a 5 to 1200 MHz passive, 2-way splitter from MiniRF. The MRFSP5725 provides a low cost, highly reliable solution for broadband CATV designs. Characterized for use in 75 ohm circuits, the MRFSP5725 offers 28 dB of isolation with typical insertion loss of only 0.5 dB. Lead free and RoHs compliant, the MRFSP5725 comes in a surface mountable 0.15 x 0.15 x 0.115" package.
Richardson RFPD Inc. announced today the availability and full design support capabilities for a new low passive mixer from M/A-COM Technology Solutions. The RF, LO and IF frequency ranges are 5 to 35 GHz, 3 to 33 GHz and DC to 4.5 GHz, respectively. The new mixer can be used for lower sideband (LSB) or upper sideband (USB) mixing, and two mixers can be combined in a quadrature configuration for optimal image rejection.
RSS
Linear Technology Corp. announces the LTC3892, a high voltage dual output synchronous step-down DC/DC controller that draws only 29 µA when one output is active and 34 µA when both outputs are enabled. The 4.5 to 60 V input supply range is designed to protect against high voltage transients, ensuring continuous operation during automotive cold crank and to accommodate a broad range of input sources and battery chemistries. 
Skyworks introduces a step-up, three-channel LED driver with an I2C interface and pulse width modulation dimming control, offering 10-bit dimming accuracy down to 0%. The SKY82896 features a wide input voltage range of 2.5 to 5.5 V and high-boost switching frequency. Minimal external components reduce the solution size and make the device suitable for LED backlighting in single-cell, Li-Ion battery-based applications.
Skyworks introduces eight low noise, variable gain receive modules for LTE and WCDMA infrastructure applications requiring low noise and high linearity. The SKY65369-11, SKY65370-11, SKY65371-11, SKY65372-11, SKY65373-11, SKY65374-11, SKY65375-11, and SKY65376-11, which are ideal for all wireless infrastructure OEMs and ODMs, are low noise, highly linear VGA modules that operate in the 700 to 2600 MHz range and feature very low return loss.
RFMW Ltd. announces design and sales support for NXP’s BLF2425M7LS-250P. This highly efficient (51% drain efficiency) LDMOS transistor is internally matched for broadband performance from 2400 to 2500 MHz, supporting ISM (industrial, scientific and medical) applications. Featuring 15 dB of gain, the NXP BLF2425M7LS-250P runs off a 28 V supply.
Richardson RFPD Inc. announced the availability and full design support capabilities for a new RF switch from M/A-COM Technology Solutions. The MASW-011055 is a high power PIN diode SP2T switch in a common anode configuration, operating from 30 MHz to 3 GHz. It features low insertion loss and excellent linearity and is capable of handling 100 W CW incident power at a base plate temperature of 85ºC.
RFMW Ltd. announces design and sales support for a 5 to 1200 MHz passive, 2-way splitter from MiniRF. The MRFSP5725 provides a low cost, highly reliable solution for broadband CATV designs. Characterized for use in 75 ohm circuits, the MRFSP5725 offers 28 dB of isolation with typical insertion loss of only 0.5 dB. Lead free and RoHs compliant, the MRFSP5725 comes in a surface mountable 0.15 x 0.15 x 0.115" package.
Richardson RFPD Inc. announced today the availability and full design support capabilities for a new low passive mixer from M/A-COM Technology Solutions. The RF, LO and IF frequency ranges are 5 to 35 GHz, 3 to 33 GHz and DC to 4.5 GHz, respectively. The new mixer can be used for lower sideband (LSB) or upper sideband (USB) mixing, and two mixers can be combined in a quadrature configuration for optimal image rejection.