We use cookies to provide you with a better experience. By continuing to browse the site you are agreeing to our use of cookies in accordance with our Privacy Policy.
Programmable, synthesised RF signal sources feature frequency and level control (plus modulation with the ANS3) and, with a standard office PC, provide turn-key solutions for variable frequency sources. Both series offer wide tuning ranges, low phase noise, non-volatile memory and are low cost and compact.
MITEQ’s Model AMFW-6F-18102120-120 is part of a new line of low profile, lightweight, small volume, and high dynamic range Ka-band very low noise amplifiers. <br><br> The new SATCOM LNA family offers a unique combination of features and performance in an extremely small footprint. Total weight is approximately 125 grams maximum, has a pressurizable waveguide at the input, and package profile is 104 mm x 22 mm x 34.5 mm.
AWR Corporation, the innovation leader in high-frequency EDA, released its Visual System Simulator™ (VSS) software. The release offers new capabilities that increase productivity for RF system designers; including time delay neural network (TDNN™), advanced amplifier behavioral models for capturing memory effects, and measurement data interchange format (MDIF) model support
The ANG series of noise generators provide up to 1 W of white Gaussian noise output in several models over the 10 Hz-18 GHz frequency range, with custom options to 40 GHz. Stock availability. The noise, which is diode generated, is amplified and the level can be varied in 1 dB steps from 0 to 10 dB or optionally in 0.1 dB steps from 0 to 111 dB.
The ALT series of LTTs are designed to replace the satellite link for test and alignment of earth station systems operating in S,C,X,Ku,Ka or DBS frequency bands. Incorporating fundamental frequency phase locked oscillators and double balanced mixers, the translators block convert frequencies from uplink to either downlink or L-band for instantaneous monitoring.
Single pole single yhrow; two throw; three throw, four throw, eight throw. Frequency Range: 0.02- 18GHz, TTL control, absorptive & reflective, octave & multi-octave, high isolation, low insertion loss. Operating temperature ranges from -55C to +85C. Stock availability.
Frequency Range: 800 MHz to 23 GHz, Octave & Standard Bands, compact design, internal load, SMA Connectors. Coaxial Isolators (ACI-2000 series) and Circulators (ACC-20000 series) are designed for low power applications. Custom frequency ranges, specifications and configurations may also be reviewed for quotation.
3 dB cut off frequency in range 1 to 12 GHz for high pass filters and 1-18 GHz for low pass filters. Miniaturised suspended substrate, quasi-elliptical function, excellent temperature stability, very rugged design. Stock availability.
RSS
Programmable, synthesised RF signal sources feature frequency and level control (plus modulation with the ANS3) and, with a standard office PC, provide turn-key solutions for variable frequency sources. Both series offer wide tuning ranges, low phase noise, non-volatile memory and are low cost and compact.
MITEQ’s Model AMFW-6F-18102120-120 is part of a new line of low profile, lightweight, small volume, and high dynamic range Ka-band very low noise amplifiers. <br><br> The new SATCOM LNA family offers a unique combination of features and performance in an extremely small footprint. Total weight is approximately 125 grams maximum, has a pressurizable waveguide at the input, and package profile is 104 mm x 22 mm x 34.5 mm.
AWR Corporation, the innovation leader in high-frequency EDA, released its Visual System Simulator™ (VSS) software. The release offers new capabilities that increase productivity for RF system designers; including time delay neural network (TDNN™), advanced amplifier behavioral models for capturing memory effects, and measurement data interchange format (MDIF) model support
The ANG series of noise generators provide up to 1 W of white Gaussian noise output in several models over the 10 Hz-18 GHz frequency range, with custom options to 40 GHz. Stock availability. The noise, which is diode generated, is amplified and the level can be varied in 1 dB steps from 0 to 10 dB or optionally in 0.1 dB steps from 0 to 111 dB.
The ALT series of LTTs are designed to replace the satellite link for test and alignment of earth station systems operating in S,C,X,Ku,Ka or DBS frequency bands. Incorporating fundamental frequency phase locked oscillators and double balanced mixers, the translators block convert frequencies from uplink to either downlink or L-band for instantaneous monitoring.
Single pole single yhrow; two throw; three throw, four throw, eight throw. Frequency Range: 0.02- 18GHz, TTL control, absorptive & reflective, octave & multi-octave, high isolation, low insertion loss. Operating temperature ranges from -55C to +85C. Stock availability.
Frequency Range: 800 MHz to 23 GHz, Octave & Standard Bands, compact design, internal load, SMA Connectors. Coaxial Isolators (ACI-2000 series) and Circulators (ACC-20000 series) are designed for low power applications. Custom frequency ranges, specifications and configurations may also be reviewed for quotation.
3 dB cut off frequency in range 1 to 12 GHz for high pass filters and 1-18 GHz for low pass filters. Miniaturised suspended substrate, quasi-elliptical function, excellent temperature stability, very rugged design. Stock availability.