Products

RSS

Bonding Source introduces the most versatile epoxy board mount press in the industry. The press is used to attach PCBs to carriers and housings with epoxy film. The press utilizes house air and works off a pneumatic piston to control the psi required for curing film epoxies under pressure.

Rohde & Schwarz adds the R&S BBA150 for the microwave range to its EMC portfolio. These compact, lightweight amplifiers with their state-of-the-art design are optimized for high frequencies starting at 0.8 GHz. Depending on the setup, the R&S BBA150 can be manually operated via its display and buttons or it can automatically control via a remote control interface or a web browser. 

SAGE Millimeter's model SSP-24303-42-D1 is a low cost, production ready K-Band FMCW ranging and directional sensor module. The center frequency of the module is set at 24.125 GHz with +/-150 MHz frequency modulation bandwidth and +3 dBm nominal output power. The sensor operates from a single +5 .0 Vdc power supplier and typically draws 250-mA current and requires 0 to +15 volts voltage swing for electrical tuning.

Lark offers a full line of ultra-thin filters for commercial and military markets. Lark’s new ultra-thin package offers superior performance in less than 0.09” high package with low insertion loss and ultimate rejection levels of 60 dB while maintaining better than 1.5:1 VSWR. Units are lightweight and ruggedized for today’s AIR, SEA & LAND applications.

Microwave Electronics’ line of unequal power splitters or tappers have been developed to unevenly split high power signals for in-building distributed antenna systems (DAS) applications & designs. They easily handle high power levels of 300 W (CW) and have an operational temperature range of -55° C to +85° C.

Richardson RFPD, Inc. announces immediate availability and full design support capabilities of a new Xinger® III 3 dB hybrid coupler from Anaren. The X3C17A1-03WS-CT is the latest addition to Anaren's Xinger III family of surface mount couplers and Doherty combiners designed especially for today’s higher power, more compact, and hotter-running equipment.

Richardson RFPD Inc. announces immediate availability and full design support capabilities for a new 18 GHz microwave phase locked loop (PLL) synthesizer from Analog Devices Inc. (ADI). The ADF41020 can be used to implement local oscillators as high as 18 GHz in the up-conversion and down-conversion sections of wireless receivers and transmitters.

Linear Technology introduces the LT6016 and LT6017, dual and quad wide input range operational amplifiers. These amplifiers combine high precision with the ruggedness and versatility of LTC’s unique Over-the-Top® architecture. Input offset voltage is 50 µV max, input bias current is 5 nA, and low frequency noise is 0.5 µV_P-P.

AR’s  EMC test software combines radiated susceptibility, conducted immunity and emissions testing into one package allowing more control and a more intuitive interface. Built-in standards include IEC, MIL-STD, DO160, automotive standards and the ability to create your own test standards.