Products

RSS

RFMW Ltd. announces design and sales support fora 1000 W pulsed power transistor. Ampleon’s BLA6H0912LS-1000 offers excellent ruggedness for avionics applications such as Mode-S, TCAS, JTIDS, DME and TACAN applications in the 960 to 1215 MHz frequency range. The BLA6H0912LS-1000 has integrated ESD protection and excellent thermal stability. It is highly flexible with respect to pulse formats with typical rise and fall times of 11 and 5 nS respectively. Typical gain is 16 dB.

Pasternack, debuts a line of semi-rigid test probes designed to assist in testing microwave circuits. The test probes are offered in 3 different diameters of semi-rigid coax including 0.02 inch (0.51 mm), 0.034 inch (0.86 mm) and 0.047 inches (1.19 mm). All test probe cable assemblies are 100% RF tested to ensure the cable assemblies operate to a maximum frequency of 6 GHz. These assemblies come in 3, 6, 9 and 12 inch lengths and are designed to fit a variety of trace widths.

AtlanTecRF, a leading global RF and microwave components and equipment manufacturer, launched an easy to use ‘build your own amplifier’ web tool. The tool is designed to take customers through a series of questions to help them easily specify and customize their amplifier requirements. This tool takes away a lot of the information exchange between parties. ensuring all necessary data required to customize an amplifier is gathered upfront before product specifications are begun.

MACOM Technology Solutions Inc. announced the MAAP-011161 and the MAAP-011193, two packaged linear power amplifiers designed specifically for use in point to point radios in cellular backhaul applications. The MAAP-011161 and MAAP-011193 operate over 7.1 to 7.9 GHz and 7.7 to 8.5 GHz, respectively, and are intended for 7 and 8 GHz radio applications. The MAAP-011161 and MAAP-011193 have a third-order intercept point (OIP3) of 46.5 dBm.

RFMW Ltd. announces design and sales support for the Delta Electronics Manufacturing 1313000G051-000, an 18 GHz SMA female, four-hole, flange mount connector with solder cup. Produced for commercial, industrial, and military applications where a quality SMA interconnect is required, the 1313000G051-000 connector body is stainless steel with gold plating per MIL-G-45204 and houses a Teflon dielectric. The center contact is gold plated.

Richardson RFPD Inc. announced the availability and full design support capabilities for a new power amplifier from M/A-COM Technology Solutions. The MAAP-011199 is a balanced 3-stage gallium arsenide (GaAs) pHEMT MMIC power amplifier that operates from 80 to 100 GHz and typically provides +24 dBm of saturated output power. The power amplifier’s balanced architecture results in excellent input and output match to 50Ω across the entire 80 to 100 GHz frequency band.

DOC206218, Rev A is the latest Hi-Rel Standard to be added to our Space portfolio. This document replaces the legacy VX-509 with the model 5116 platform and enables customers to specify component pedigree and quality assurance requirements with a 15-digit catalog part number. This VCXO supports a 1 to 85MHz frequency range with typical phase noise performance of -167dBc/Hz at 100 kHz (16 MHz, +5 V).

Pasternack adds a family of waveguide transitions operating from 5.85 to 110 GHz across fourteen frequency bands. These waveguide transitions, also referred to as waveguide adapters, are widely used in high power wireless applications such as instrumentation, test benches, SATCOM, MILCOM, radar, and telecom where signal strength and integrity are critical. Currently, there are 23 unique models of waveguide to waveguide transitions offered from stock at Pasternack.

The SPINNER low PIM switch - a double-pole, double-throw switch has revolutionized equipment testing. It lets you tap potentially enormous savings on the order of about 90% compared to conventional methods. If you want to use a switch in a calibrated test system and need it to keep working perfectly through hundreds of thousands of cycles without requiring any maintenance, there is really only one choice: the SPINNER low PIM switch.

With SPINNER you select exactly the jumpers that you need. You decide on the types and lengths of the cables and pick out the connectors. A few days later, you receive a package containing exactly what you ordered. Every mobile communication network is structured the same way. But the equipment and local conditions vary from site to site. To make sure it works well, the prerequisites include technically excellent products, short paths, and no unnecessary transitions (to reduce PIM).