We use cookies to provide you with a better experience. By continuing to browse the site you are agreeing to our use of cookies in accordance with our Privacy Policy.
PMI Model No. BP13G-10G-CD-SFF is a suspended substrate bandpass filter that offers a wide passband of 8 to 18 GHz. This filter offers a low insertion loss of 1.5 dB typically and a passband VSWR of 2.0:1 maximum. Stopband rejection of 70 dB typical is provide from DC to 6 GHz and from 20 to 23 GHz.
SemiGen’s SZB900 series of Zero Bias Schottky Detector Diodes are catered to perform as components of video detectors and power monitors, eliminating the need for external DC biasing.
AtlanTecRF, a leading global RF and microwave components and equipment manufacturer, announced the latest addition to its stable of high performance cable assemblies - the ACH series of high velocity products available in frequency ranges of DC-18, DC-26.5, DC-40 and DC-50 GHz. With velocity of propagation of 83%, the standard assemblies are available from stock in lengths of 0.5, 1.0, 1.5 and 2.0 metres.
Anritsu Co.introduces cellular module test application (CMTA) software for its signaling testers MD8475A/B which provides test cases to dramatically simplify testing chipsets and automotive-related telematics modules used in connected car designs and implementation. Integrating the new CMTA test package with the MD8475A/B through Anritsu’s innovative SmartStudio GUI allows automotive manufacturers and suppliers to verify operation in various carrier environments.
Optenni Lab is a novel software with innovative analysis features that increases the productivity of antenna designers and speeds up the antenna design process. Optenni Lab offers fast fully automatic matching circuit optimization tools, estimation of the obtainable bandwidth of antennas and calculation of the worst-case isolation in multi-antenna systems.
The R&S ELEKTRA EMI test software has been designed for easy and intuitive EMI measurements during product development. It supports EMI test receivers and spectrum analyzers from Rohde & Schwarz. Even development engineers or technicians who only occasionally use these instruments to measure electromagnetic interference are able to configure automated test sequences quickly, often right in the development lab, using GTEM cells or line impedance stabilization networks (LISN).
RFMW Ltd. announces design and sales support for a B1 uplink filter. The Qorvo TQQ7301 uses BAW technology providing high isolation and low loss for small cells, LTE data cards, repeaters and base station infrastructure applications. Covering the 60 MHz bandwidth of 1920 to 1980 MHz, insertion loss is only 4 dB while attenuation of unwanted signals is 30 dB. Additionally, the TQQ7301 can handle up to 27 dBm of input power.
SAGE Millimeter has released a V-Band, dual polarized horn antenna assembly covering 50 to 75 GHz. The antenna features an integrated orthomode transducer (OMT) that provides high port isolation and cross-polarization cancellation, enabling the antenna to separate a circular or elliptical polarized waveform into two linear, orthogonal waveforms. At the center frequency, the horn antenna has 15 dBi nominal gain and a typical half-power beamwidth of 28 degrees on the E-plane and 33 degrees on the H-plane.
PMI Model DTA-26R5G40G-30-CD-1 is a 10-Bit programmable 30 dB PIN diode attenuator with a step resolution of 0.03 dB over the frequency range of 26.5 to 40 GHz. This model operates on a single +15 VDC supply and draws only 50 mA of current. Very high levels of attenuation accuracy of 0.03 dB is achieved. This attenuator provides ultra-fast switching speeds of 300 ns and has an operating input power rating of +10 dBm.
Rohde & Schwarz introduced a modular probe system for precision measurements up to 9 GHz. The R&S RT-ZM probe system used in combination with a Rohde & Schwarz oscilloscope is an excellent solution for easily and precisely measuring fast signals. It offers a maximum bandwidth up to 9 GHz, a DC offset range of ±16 V and the MultiMode function that allows users to switch between test modes without recontacting.
RSS
Optenni Lab is a novel software with innovative analysis features that increases the productivity of antenna designers and speeds up the antenna design process. Optenni Lab offers fast fully automatic matching circuit optimization tools, estimation of the obtainable bandwidth of antennas and calculation of the worst-case isolation in multi-antenna systems.
RFMW Ltd. announces design and sales support for a B1 uplink filter. The Qorvo TQQ7301 uses BAW technology providing high isolation and low loss for small cells, LTE data cards, repeaters and base station infrastructure applications. Covering the 60 MHz bandwidth of 1920 to 1980 MHz, insertion loss is only 4 dB while attenuation of unwanted signals is 30 dB. Additionally, the TQQ7301 can handle up to 27 dBm of input power.
PMI Model DTA-26R5G40G-30-CD-1 is a 10-Bit programmable 30 dB PIN diode attenuator with a step resolution of 0.03 dB over the frequency range of 26.5 to 40 GHz. This model operates on a single +15 VDC supply and draws only 50 mA of current. Very high levels of attenuation accuracy of 0.03 dB is achieved. This attenuator provides ultra-fast switching speeds of 300 ns and has an operating input power rating of +10 dBm. 