Products

RSS

PMI Model No. PE2-30-1R018R0-4R5-22-12-SFF-1 is a 1.0 to 18.0 GHz, low noise amplifier that typically provides 30 dB of gain while maintaining a maximum gain flatness of ±1.5 dB over the operating frequency. The noise figure is 4.5 dB maximum and offers an OP1dB of 22 dBm minimum.  The operating voltage is +12 to +15VDC with a typical current draw of 500 mA. 

DTA-2G18G-60-CD-2-OPT-1G18G is a non-reflective, 10 BIT, programmable 60 dB, pin diode attenuator with step resolution as low as 0.06 dB over the frequency range of 1.0 to 18.0 GHz. Specifications include insertion loss of 4.5 dB; VSWR 2.0:1 maximum; attenuation accuracy of ±1.0 dB at 0 to 20 dB, ±1.5 dB at 20 to 40 dB and ±2.0 dB at 40 to 60 dB; typical attenuation flatness of ±1.0 dB at 20 dB, ±1.25 dB at 40 dB and ±3.0 dB at 60 dB; switching speed 1.0 µs.

PMI Model Number TD-1G12G-RL-CD-SFF-NH is a high speed threshold detector designed to operate over the 1 to 12 GHz frequency range, with an adjustable threshold level of -30 to -10 dBm, VSWR of 3.0:1 Typical. This Unit comes in a very small size with field removable SMA connectors on the input and output.

PMI Model No. P6T-2G18G-55-R-512-SFF is a high speed, single pole, six throw, reflective switch capable of switching within 15 ns.  The frequency range is 2.0 to 18.0 GHz and has over 55 dB of isolation. This model was designed to produce very low video transients of 15 mV peak to peak and a video transient spectral content of -65 dBm maximum. 

Southwest Antennas is pleased to introduce two compact MIMO sector antennas to their existing line-up of directional antenna solutions. Designed for 2 port (2 x 2) MIMO and MANET radios, these compact sector antennas feature 10 dBi of peak gain and 56 degrees of horizontal and vertical beamwidth. Measuring only 4.3 inches in length and height and 2.9 inches wide, these small antennas are easy to deploy for both indoor and outdoor application.

AtlanTecRF launched a range of Ka-band loop test translators (LTT) with ethernet control. The ALR series of ka-band loop test translators address the 27 GHz uplink market and feature synthesised variable frequency local oscillators (LOs) to provide the user with the most versatile and comprehensive operating configurations for translation of uplink (Tx) frequencies to either downlink (Rx) frequencies or to L-Band, and for L-Band to downlink (Rx).

Cobham Microelectronic Solutions developed a series of frequency synthesizers designed to meet stringent phase noise.  The 1018 synthesizer measures 2.6 x 2.6 x 0.6 inches, weighs just 0.25 lbs., and delivers full frequency coverage from <450 MHz to >18 GHz in 10 MHz steps with <250 us switching speed. 

Featuring a low coefficient of thermal expansion (CTE) of 15-20 x 10^-6 in/in/°C, Master Bond EP13LTE is a one part epoxy for structural bonding applications. EP13LTE cures readily in 1-2 hours at 300 to 350°F. This epoxy paste has limited flow while curing. It bonds well to many substrates such as metals, glass, composites, ceramics and plastics.

Isolators and circulators covering public safety band (700 to 800 MHz and 698 to 1000 MHz) in SMA and Type N-Female connectors.  With typical specifications of; VSWR of 1.30/1.35:1, insertion loss of 0.5 dB and isolation of 18 to 20 dB. MECA’s rugged and reliable construction makes them ideal for enterprise and public safety networks in the upper UHF and 700 MHz bands. 

Directional Couplers (6. 10, 20 and 30 dB) covering from 380 MHz to 960 MHz public safety bands.  MECA’s rugged and reliable construction makes them ideal for enterprise and public safety networks such as UHF, VHF, 700 MHz and cell bands.