Vectron's VS–703 Voltage Controlled SAW Oscillator (VCSO) is a SAW stabilized, low phase noise, high frequency Oscillator with CML Compatible Outputs (fN < 1.2 GHz), Differential Sine wave Outputs (fN > 1.2 GHz), operating at 3.3 volt supply, hermetically sealed 5x7 ceramic package.
RSS
The OX–171 is a high–stability ovenized crystal oscillator in a 28 x 38 mm package, capable of aging rates of 0.06 ppb/day and temperature stabilities of 1ppb over an industrial temperature range. Driven by an SC–cut crystal, the oscillator provides excellent phase noise and Allan Deviation.
Dow-Key Microwave Corp. presents its 511H-Series high power T-switch which has been qualified and supplied to various domestic and international space programs for both military and commercial use. The 511H-Series design is offered with 1.5 kW peak power at UHF, 300 W peak power both at L-Band and S-Band, and 200 W peak power at C-Band.
RFMW Ltd. announces design and sales support fora 50 ohm absorptive switch from TriQuint. The TQC0015 internal terminations can handle a maximum CW power of up to 2 W. This performance is enhanced with an enable-pin functionality and compatibility with 1.8 or 3.3 V control signals, making the TQC0015 useful in small cell applications.
RFMW Ltd. announces design and sales support for Rosenberger’s 15K101-40ME4 Micro-RF test switch connector. The 15K101-40ME4 Micro-RF test switch is an ultra-miniature (1.8 mm x 1.9 mm, height 1.5 mm), low-cost, surface mount, coax "switch” connector for the verification of antenna/circuit performance in any kind of small device.
Pickering Interfaces, a leading provider of modular signal switching and instrumentation for use in electronic test and simulation, is expanding its range of PCI precision programmable resistor solutions with the introduction of two new PCI cards. the 50-262 PCI RTD simulator range is offered with two resistance ranges and four different models are offered in the 50-265 PCI strain gauge range.
The VX–805's phase noise is optimized for wireless base stations. Base station architectures are getting smaller and as they do, board densities are increasing. As a result the phase noise performance of the transceiver VCXO is critical for these applications.
The Ensemble® IOM-200 (IO Mezzanine) XMC module and IOR-280 RTM from Mercury Computer Systems provide the industry’s leading 10 Gbps ethernet IO density. When two IOM-200s are configured with the IOR-280 rear transition module (RTM), up to eight channels of 10 Gbps Ethernet can be supported per 6 U open VPX slot.
PMI Model No. PLO-9G-CD-1 is a phase locked oscillator with an output frequency of 9.0 GHz. This model provides minimum output power of +21 dB with all spurs held to -60 dBc and harmonics held to -25 dBc. The unit has a VSWR or <1.5:1 for all phases and is supplied with SMA(F) connectors in a housing that measures 2.25" x 2.25" x 0.63"