We use cookies to provide you with a better experience. By continuing to browse the site you are agreeing to our use of cookies in accordance with our Privacy Policy.
Hittite Microwave Corp. offers a wideband GaAs pHEMT MMIC Distributed Power Amplifier die which is ideal for military EW, test & measurement equipment, and broadband telecom equipment applications up to 48 GHz. HMC1022 is a 0.25 W GaAs pHEMT MMIC amplifier which operates between DC and 48 GHz.
Skyworks Solutions has introduced a new single stage GaAs PHEMT LNA that offers low noise figure (0.60 dB), very high linearity (23 dBm IIP3), and excellent return loss (14 dB) in a small 2 x 2 mm DFN package. On-die active bias design ensures consistent performance and enables unconditional stability.
Narda, an L-3 Communications company, has introduced the 4436 family of RF power dividers that operate from 500 MHz to 8 GHz and are available in two-way, three-way, four-way, and eight-way versions. The power dividers are a cost-effective solution for commercial and defense applications.
Hittite announces the release of the HMC6383 , a high-performance, flexible, direct conversion receiver (DCR) radio design platform that can be configured on-the-fly. Fully field programmable, the HMC6383 platform is designed to serve as a receiver subsystem building block for various applications including cellular basestations, microwave radio, adaptive IF strips, wireless LAN, software defined radio and test equipment.
The HMC10H and HMI10H series High Power Circulators and Isolators operate in the 75 to 110 GHz waveguide band. They handle up to 20 W of average power and 350 W peak. A RF bandwidth of 2 to 3 GHz and isolation of 18 dB are typical. These devices are used to buffer mismatches, signal duplexers, and to couple amplifier stages.
Rohde & Schwarz presents the R&S ZNB with four test ports and a second internal generator. Users who need to characterize multiport DUTs, mixers and amplifiers will benefit from the extremely wide dynamic range, short measurement times and exceptionally easy operation.
Ultra flexible test cables with high phase stability are new from AtlanTecRF. With velocity of propagation to 70% and a frequency range from DC to 18 GHz the assemblies are available in a choice of SMA or Type N male stainless steel connectors as standard but with other options available for custom designs.
Hittite Microwave Corporation, the world class supplier of complete MMIC based solutions for communication & military markets introduces five new SMT packaged MMIC Band-Pass Tunable Filters which are ideal for pre-selection applications in wideband test and measurement equipment, communication systems and electronic warfare (EW) subsystems up to 37.0 GHz.
PMI Model ERDLVA-218-CW-LPD is a CW Immune, Extended Range Detector Logarithmic Video Amplifier (ERDLVA) designed for ultra low DC power consumption. This model operates over the 2 to 18 GHz frequency range and has the ability to interface with an output cable measuring over 100 feet in length.
Hittite Microwave Corporation, the world class supplier of complete MMIC based solutions for communication & military markets is featuring a new set of octal 12-bit Analog-to-Digital Converters, the HMCAD1102, HMCAD1101 and HMCAD1100 which complements Hittite’s ultra low power ADC products.
RSS
Hittite Microwave Corp. offers a wideband GaAs pHEMT MMIC Distributed Power Amplifier die which is ideal for military EW, test & measurement equipment, and broadband telecom equipment applications up to 48 GHz. HMC1022 is a 0.25 W GaAs pHEMT MMIC amplifier which operates between DC and 48 GHz.
Skyworks Solutions has introduced a new single stage GaAs PHEMT LNA that offers low noise figure (0.60 dB), very high linearity (23 dBm IIP3), and excellent return loss (14 dB) in a small 2 x 2 mm DFN package. On-die active bias design ensures consistent performance and enables unconditional stability. 
Narda, an L-3 Communications company, has introduced the 4436 family of RF power dividers that operate from 500 MHz to 8 GHz and are available in two-way, three-way, four-way, and eight-way versions. The power dividers are a cost-effective solution for commercial and defense applications.
Hittite announces the release of the HMC6383 , a high-performance, flexible, direct conversion receiver (DCR) radio design platform that can be configured on-the-fly. Fully field programmable, the HMC6383 platform is designed to serve as a receiver subsystem building block for various applications including cellular basestations, microwave radio, adaptive IF strips, wireless LAN, software defined radio and test equipment.
The HMC10H and HMI10H series High Power Circulators and Isolators operate in the 75 to 110 GHz waveguide band. They handle up to 20 W of average power and 350 W peak. A RF bandwidth of 2 to 3 GHz and isolation of 18 dB are typical. These devices are used to buffer mismatches, signal duplexers, and to couple amplifier stages.
Ultra flexible test cables with high phase stability are new from AtlanTecRF. With velocity of propagation to 70% and a frequency range from DC to 18 GHz the assemblies are available in a choice of SMA or Type N male stainless steel connectors as standard but with other options available for custom designs.
Hittite Microwave Corporation, the world class supplier of complete MMIC based solutions for communication & military markets introduces five new SMT packaged MMIC Band-Pass Tunable Filters which are ideal for pre-selection applications in wideband test and measurement equipment, communication systems and electronic warfare (EW) subsystems up to 37.0 GHz.
PMI Model ERDLVA-218-CW-LPD is a CW Immune, Extended Range Detector Logarithmic Video Amplifier (ERDLVA) designed for ultra low DC power consumption. This model operates over the 2 to 18 GHz frequency range and has the ability to interface with an output cable measuring over 100 feet in length.
Hittite Microwave Corporation, the world class supplier of complete MMIC based solutions for communication & military markets is featuring a new set of octal 12-bit Analog-to-Digital Converters, the HMCAD1102, HMCAD1101 and HMCAD1100 which complements Hittite’s ultra low power ADC products.