Antennas

RSS

Pasternack has just launched its new mobile website which marries powerful parametric search capabilities with a sleek, simplified and user-friendly interface that is specifically intended for smart phones and tablets. Pasternack’s main objective with the new mobile site was to provide engineers in the field the easiest, most intuitive process for searching and finding any of the company’s +40,000 RF components and cable assemblies.

Model SAM-3533532205-28-L1 is a micro-strip patch array antenna with rectangular waveguide interface. The antenna is constructed with higher performance and low loss soft microwave substrates. Various power distribution arrangements, such as corporate-fed or series-fed, are implemented to achieve the best aperture efficiency and antenna performance. The patch array antenna offers high gain and very low side lobes.

Richardson RFPD Inc. announced the availability and full design support capabilities for a new active rugged antenna from Maxtena, Inc. The M1227HCT-A2-SMA is designed for L1/L2 GPS and GLONASS bands, and specifically for applications requiring greater accuracy than L1 antennas can provide. The M1227HCT-A2-SMA features a screw-on design, with an integrated SMA connector. It offers superior filter­ing performance and is rated for 50 V/m out-of-band interference.

Richardson RFPD Inc. announced the availability and full design support capabilities for three new SMT multiband antennas from Fractus, S.A. The Fractus mXTEND™ antenna boosters have been specifically designed to provide multiband performance in wireless/mobile devices, enabling worldwide coverage by allowing operation in the communication standards GSM850, GSM900, GSM1800/DCS, GSM1900/PCS, UMTS, LTE700, LTE800, LTE850, LTE900, LTE1700, LTE1800, LTE1900, LTE2000, LTE2100, LTE2300, LTE2500, LTE2600, LTE3500 and LTE3700.

Model SAL-7531143004-10-S1 is a W band lens corrected antenna with frequency range from 75 to 110 GHz. The antenna has 4 degree half power beamwidth with a typical of 30 dBi gain. The antenna is equipped with a rectangular WR-10 waveguide and UG-387/ U-M flange, which supports linear polarized waveforms. The lens corrected antennas cover the frequency range from 8.2 to 140 GHz.

The OMNI-S antenna is especially designed for applications in harsh environments on street cabinets, distribution boxes or industrial vehicles. It supports various wireless bands such as cellular 2G, 3G, 4G LTE (US / EUR), WiFi MIMO and GPS/Glonass for industrial wireless and M2M communication, for WiFi offload, carrier-grade WiFi as well as for small cells and WiFi hotspots.

 

Richardson RFPD, Inc. announced the availability and full design support capabilities for Hittite Microwave products from Analog Devices, Inc.  Customers will benefit from the complete solutions that address the performance, reliability, and time-to-market requirements of an ever-widening range of ADI applications.

Arrow RF & Power, officially doing business as Richardson RFPD, announced the online availability of videos and downloadable files of the presentations that were given at its booth during the 2014 International Microwave Symposium (IMS) in Tampa, Fla.

Model SAO-5836230230-15-S1 is a V Band vertically polarized omni-directional antenna with center frequency at 60 and ± 2 GHz operation bandwidth. The antenna is designed for close-in wireless communication applications. The antenna has 30 degree vertical beam width with a typical 2 dBi gain.

RFMW Ltd. announces design and sales support for Sangshin Elecom’s  KSA series of Globalstar patch antennas.  The KSA-LCSP1621MS25 is designed specifically for Globalstar (1611.25 to 1618.75 Mhz) applications. This left hand circularly polarized (LHCP) antenna is tuned / tested for operation at 1621 MHz (5 MHz above the GlobalStar band) to accommodate frequency shifts that may occur in a radome.