We use cookies to provide you with a better experience. By continuing to browse the site you are agreeing to our use of cookies in accordance with our Privacy Policy.
Southwest Antennas has released four L-Band 1.35 to 1.4 GHz, 2.15 dBi Ultra Flex Omni antennas, available with several RF connector options. These L-Band options complement the existing line of S & C Band Ultra Flex Omni Antennas. These small, lightweight, and rugged antennas are ideal for handheld radios, body-worn radios, wireless broadcast camera systems, UAV communication, and many other applications and are also available from 2.1 to 2.5 GHz and 5 to 6 GHz.
Southwest Antennas offers an innovative line of S and C Band Omni Antennas with an integrated sealed spring base, which is stiff enough to keep the antenna oriented vertically but can bend and flex if pushed, reducing the chance of damage to the antenna or attached radio equipment. These antennas are an ideal solution for wireless cameras / broadcast video or mobile handheld radios used by first responders.
Southwest Antennas offers two and four input MIMO Omni antennas with integrated magnetic mount base. These are ideal for vehicle mount antenna applications, especially where permanent installation is not desired or rapid deployment is needed. Both antennas are designed for S Band communication at 2.1 - 2.5 GHz and are 45° slant polarized, and include 12 feet of integrated low-loss RF cable with Type-N(m) RF connectors.
Southwest Antennas offers a high performance 1,090 MHz vertical omni antenna specifically for the aviation tracking market (Part # 1085-120), designed to work with any brand of ADS-B receiver and features a Type-N(f) RF connector. Southwest Antennas has optimized the impedance of the antenna feed point and pattern to maximize performance and deliver 5.5 dBi of gain, with a design that helps pull in signals from aircraft near the antenna or at high elevation angles.
Southwest Antennas offers a full line of body worn antennas for dismounted user applications or covert surveillance operations where the radio and antenna system needs to be concealed on the body. These antennas weigh less than an ounce, and are tuned specifically to be used next to or close to the human body. Southwest Antennas offers models designed to operate in the UHF, L, and S Band frequency ranges.
Southwest Antennas Part # 1001-060 is a dual band, half wave dipole Omni antenna with a low band frequency range of 2.1 to 2.5 GHz and a peak gain of 2.1 dBi, and a high band frequency of 4.4 to 5.9 GHz and a peak gain of 2.5 dBi. The antenna features an integrated 3" RF Gooseneck with black chrome non-rotating SMA(m) RF connector, which contributes to the improvement of RF link margin and overall antenna performance.
The 4G LTE Cellular Omni Concealment Antenna (P/N # 1066-012) from Southwest Antennas allows for easy integration of penta-band 4G LTG cellular communication into a wide variety of devices and small spaces, and is ideal for low-profile or covert surveillance use. The penta-band design gives the antenna coverage across all 4G LTE bands, allowing for both domestic and international use. A miniature low loss RF cable and SMA Male connector allow for flexible connection options.
Aaronia´s new 3D RF Tracking Antenna IsoLOG 3D includes a high density, customizable LPDA sector array. A total of at least 8 and up to 36 LPDA antennas, for horizontal and for vertical polarization can be integrated. Additionally 8 or 16 specialized low frequency Antennas can be added to extend the frequency range down to 9 kHz. In total up to 52 independent Antennas can be equipped.
MCV Microwave dielectric antennas are compact size, high performance, reliable and cost competitive. MCV offers patch antennas in various sizes for GPS applications. Their rectangular micro strip designed patch antenna has excellent stability and sensitivity through the use of high-performance, proprietary dielectric materials with strict dimensional accuracy, excellent tolerance in dielectric constant and temperature stability.
MCV Microwave introduces new multiband antenna for IoT applications, the Hybrid Antenna. This device is tunable, affordable and optimized with excellent performance in a wide range of physical environments. We were able to divide the antenna's functionality between a mass-produced 'superstructure' portion that enhances the radiation pattern and a custom-designed planar circuit board portion that enables economical tuning for frequency and match.
RSS
Southwest Antennas has released four L-Band 1.35 to 1.4 GHz, 2.15 dBi Ultra Flex Omni antennas, available with several RF connector options. These L-Band options complement the existing line of S & C Band Ultra Flex Omni Antennas. These small, lightweight, and rugged antennas are ideal for handheld radios, body-worn radios, wireless broadcast camera systems, UAV communication, and many other applications and are also available from 2.1 to 2.5 GHz and 5 to 6 GHz.
Southwest Antennas offers an innovative line of S and C Band Omni Antennas with an integrated sealed spring base, which is stiff enough to keep the antenna oriented vertically but can bend and flex if pushed, reducing the chance of damage to the antenna or attached radio equipment. These antennas are an ideal solution for wireless cameras / broadcast video or mobile handheld radios used by first responders.
Southwest Antennas offers two and four input MIMO Omni antennas with integrated magnetic mount base. These are ideal for vehicle mount antenna applications, especially where permanent installation is not desired or rapid deployment is needed. Both antennas are designed for S Band communication at 2.1 - 2.5 GHz and are 45° slant polarized, and include 12 feet of integrated low-loss RF cable with Type-N(m) RF connectors.
Southwest Antennas offers a high performance 1,090 MHz vertical omni antenna specifically for the aviation tracking market (Part # 1085-120), designed to work with any brand of ADS-B receiver and features a Type-N(f) RF connector. Southwest Antennas has optimized the impedance of the antenna feed point and pattern to maximize performance and deliver 5.5 dBi of gain, with a design that helps pull in signals from aircraft near the antenna or at high elevation angles.
Southwest Antennas offers a full line of body worn antennas for dismounted user applications or covert surveillance operations where the radio and antenna system needs to be concealed on the body. These antennas weigh less than an ounce, and are tuned specifically to be used next to or close to the human body. Southwest Antennas offers models designed to operate in the UHF, L, and S Band frequency ranges.
Southwest Antennas Part # 1001-060 is a dual band, half wave dipole Omni antenna with a low band frequency range of 2.1 to 2.5 GHz and a peak gain of 2.1 dBi, and a high band frequency of 4.4 to 5.9 GHz and a peak gain of 2.5 dBi. The antenna features an integrated 3" RF Gooseneck with black chrome non-rotating SMA(m) RF connector, which contributes to the improvement of RF link margin and overall antenna performance.
The 4G LTE Cellular Omni Concealment Antenna (P/N # 1066-012) from Southwest Antennas allows for easy integration of penta-band 4G LTG cellular communication into a wide variety of devices and small spaces, and is ideal for low-profile or covert surveillance use. The penta-band design gives the antenna coverage across all 4G LTE bands, allowing for both domestic and international use. A miniature low loss RF cable and SMA Male connector allow for flexible connection options.
MCV Microwave dielectric antennas are compact size, high performance, reliable and cost competitive. MCV offers patch antennas in various sizes for GPS applications. Their rectangular micro strip designed patch antenna has excellent stability and sensitivity through the use of high-performance, proprietary dielectric materials with strict dimensional accuracy, excellent tolerance in dielectric constant and temperature stability.
MCV Microwave introduces new multiband antenna for IoT applications, the Hybrid Antenna. This device is tunable, affordable and optimized with excellent performance in a wide range of physical environments. We were able to divide the antenna's functionality between a mass-produced 'superstructure' portion that enhances the radiation pattern and a custom-designed planar circuit board portion that enables economical tuning for frequency and match.