We use cookies to provide you with a better experience. By continuing to browse the site you are agreeing to our use of cookies in accordance with our Privacy Policy.
RFMW Ltd. announces design and sales support for omni-directional concealment antenna products specifically for use in covert surveillance or other applications where an antenna needs to be hidden from view or disguised to not draw attention. Southwest Antennas’ model 1066-014 offers quad-band, 4G, LTE cellular coverage for global use. This antenna offers superior, 360 degree horizontal beamwidth and 76 degree low-band vertical beamwidth (46 degree high-band vertical beamwidth) when properly mounted.
The IsoLOG 3D Mobile is a broadband, three-dimensional antenna designed specifically for field monitoring and surveillance applications. The 3D antenna covers the frequency range of 9 kHz to 6 GHz.
Anokiwave announced the introduction of the first in a family of Phased Array Antenna Innovator’s Kits, the AWMF-0129, driven by the Anokiwave AWMF-0108 28GHz 5G Quad Core IC with embedded functions for remote telemetry and low-latency steering™. The AWMF-0129 is a 64-element, single polarization 5G phased array antenna designed to cover the 27.5 to 30 GHz frequency band. It is a planar antenna that can be used either as a stand-alone component, or combined and synchronized with other arrays.
Southwest Antennas introduced four new MIMO sector antennas to their existing line-up of directional antenna solutions. The four new MIMO sector antennas feature a wide 120° horizontal beamwidth, allowing for wide area coverage. Designed for 2 x 2 and 4 x 4 MIMO radio systems, two and four port versions of these sector antennas are offered in both 2.2 to 2.5 GHz S-Band and 4.4 to 5.0 GHz C-Band frequency options, for ISM/broadcast and law enforcement use.
Optenni Lab is a novel software with innovative analysis features that increases the productivity of antenna designers and speeds up the antenna design process. Optenni Lab offers fast fully automatic matching circuit optimization tools, estimation of the obtainable bandwidth of antennas and calculation of the worst-case isolation in multi-antenna systems.
SAGE Millimeter has released a V-Band, dual polarized horn antenna assembly covering 50 to 75 GHz. The antenna features an integrated orthomode transducer (OMT) that provides high port isolation and cross-polarization cancellation, enabling the antenna to separate a circular or elliptical polarized waveform into two linear, orthogonal waveforms. At the center frequency, the horn antenna has 15 dBi nominal gain and a typical half-power beamwidth of 28 degrees on the E-plane and 33 degrees on the H-plane.
Richardson RFPD Inc. announced the availability and full design support capabilities for the latest mXTEND™ SMT multiband antenna from Fractus, S.A. The Fractus mXTEND antenna boosters leverage Fractus’ Virtual Antenna™ technology to reduce design cycle times by replacing time-consuming, high-NRE custom antenna solutions with miniature, standard, off-the-shelf components.
RFMW Ltd. announces design and sales support for Southwest Antennas’ “cloverleaf” configuration of omni antennas. These antennas are 3 x smaller than existing solutions yet maintain similar antenna gain, efficiency and excellent radiation pattern control over the entire operational frequency band. Model 1032-024 is a right hand circular polarized (RHCP) Omni cloverleaf antenna with 2.3 to 2.5 GHz frequency band coverage and 1.2 dBi gain. Model 1032-025 is a left hand circular polarized (LHCP) antenna.
Model SAO-2832930610-28-S1 is a WR-28 omnidirectional antenna that operates between 28 and 29 GHz. This vertically polarized antenna offers 360 degrees azimuth coverage with 6 dB gain and ±3 dB gain flatness. The antenna features a half power beamwidth of 10 degrees in the vertical direction. The actual operating frequency of this omnidirectional antenna is much broader.
Anokiwave offers a family of Active Antenna ICs at X and K/Ka-bands for 5G, commercial RADAR, and SATCOM markets. Supported with expert systems engineering and optimal technology solutions, our highly integrated Core ICs and System-in-Package solutions provide our customers the fastest-time-to-market. Anokiwave’s patent-pending IP blocks implemented in silicon technology enable low-cost hybrid beam forming.
RSS
Optenni Lab is a novel software with innovative analysis features that increases the productivity of antenna designers and speeds up the antenna design process. Optenni Lab offers fast fully automatic matching circuit optimization tools, estimation of the obtainable bandwidth of antennas and calculation of the worst-case isolation in multi-antenna systems.
Richardson RFPD Inc. announced the availability and full design support capabilities for the latest mXTEND™ SMT multiband antenna from Fractus, S.A. The Fractus mXTEND antenna boosters leverage Fractus’ Virtual Antenna™ technology to reduce design cycle times by replacing time-consuming, high-NRE custom antenna solutions with miniature, standard, off-the-shelf components.
RFMW Ltd. announces design and sales support for Southwest Antennas’ “cloverleaf” configuration of omni antennas. These antennas are 3 x smaller than existing solutions yet maintain similar antenna gain, efficiency and excellent radiation pattern control over the entire operational frequency band. Model 1032-024 is a right hand circular polarized (RHCP) Omni cloverleaf antenna with 2.3 to 2.5 GHz frequency band coverage and 1.2 dBi gain. Model 1032-025 is a left hand circular polarized (LHCP) antenna.
Model SAO-2832930610-28-S1 is a WR-28 omnidirectional antenna that operates between 28 and 29 GHz. This vertically polarized antenna offers 360 degrees azimuth coverage with 6 dB gain and ±3 dB gain flatness. The antenna features a half power beamwidth of 10 degrees in the vertical direction. The actual operating frequency of this omnidirectional antenna is much broader.
Anokiwave offers a family of Active Antenna ICs at X and K/Ka-bands for 5G, commercial RADAR, and SATCOM markets. Supported with expert systems engineering and optimal technology solutions, our highly integrated Core ICs and System-in-Package solutions provide our customers the fastest-time-to-market. Anokiwave’s patent-pending IP blocks implemented in silicon technology enable low-cost hybrid beam forming.