Amplifiers and Oscillators

Ultra Broadband Amplifier

Ultra Broadband Amplifier

AtlanTecRF launched an ultra broadband amplifier, covering the 50 MHz to 20 GHz frequency range in a single unit. This 25 dB gain block delivers up to 18 dB at 1 dB compression and yet has a typical noise figure of just 1.8 dB, thereby making it an all round, general purpose amplifier with applications in test measurement, electronic countermeasures and scientific research as well as a whole range of communication equipment.


Read More
567_446_amp3116_big

High Frequency, Wide Band SSPA Module: AMP3116

Exodus introduces the high frequency, wide band AMP3116 SSPA module covering the 26 to 32 GHz frequency band at 10 W. The AMP3116 uses GaAsFET Hybrid devices and operates from a 9 VDC supply with a 40 dB gain and a gain flatness of 4.0 dB Max peak to peak. This Module is suitable for use with all single channel modulation standards and features lightweight construction, high reliability and ruggedness.


Read More
Amplifier-Accessories-SQ

RF and Microwave Power Amplifier Accessories

Pasternack has released a series of RF and microwave power amplifier accessories that includes heat sinks, heat sinks with cooling fans and power control cable assemblies.  Heat sinks are devices that enhance heat dissipation from a hot surface and are ideal for thermal management of power amplifiers in test and measurement applications. A functioning power amplifier will generate elevated levels of heat that needs to be properly dissipated. 


Read More
GMTA-1002

Threshold Detector: GMTA-1002

PMI Model No. GMTA-1002 is a threshold detector designed to operate over the frequency range of 2.0 to 18.0 GHz. It has a threshold level of -23 dBm with threshold stability of +/-3.0 dBm over frequency and temperature. Other specifications Input Operating Range of -18 to -23 dBm, Input VSWR 2.5:1 maximum, maximum input power level +10 dBm (without damage), Response Time Any Input Greater than 3 dB = 100 µs and operates using +12 VDC at 50 mA maximum. 


Read More
SDLVA-218-60-70MV-CW

CW Immune SDLVA: SDLVA-218-60-70MV-CW

PMI Model No. SDLVA-218-60-70MV-CW is a CW immune SDLVA (Successive Detection Log Video Amplifier). This unit operates from 2.0 to 18.0 GHz and has the ability to interface with a long cable (65 FT), while maintaining high speed, flatness and accuracy.  Specifications include frequency flatness:  ±2.0 dB Typ, Signal Capability:  Pulse (100 ns to 300 µs), Pulse on CW TSS: (-20 ºC to +85 ºC) -66 dBm for 10 MHz Video Bandwidth and Log Dynamic Range  -60 dBm to 0 dBm.


Read More
RFCA8830

High Linearity Gain Block: RFCA8830

RFMW Ltd. announces design and sales support for a high linearity gain block from Qorvo. Featuring >-75 dBc CSO, the RFCA8830 covers 45 to 1218 MHz as a DOCSIS 3.1 compliant amplifier for HFC optical nodes, laser drivers and balanced antenna applications. Gain measures 19 dB and noise figure is <2 dB. Operating from 5 V, the RFCA8830 is packaged as an SOIC8.


Read More
DLVA-8G10G-75-50-SFF

Detector Log Video Amplifier: DLVA-8G10G75-50-SFF

PMI Model No. DLVA-8G10G75-50-SFF is an 8.0 to 10.0 GHz, detector log video amplifier. This unit has a dynamic range of -75 to 0 dBm, a log linearity of ±1.8 dB, and a log slope of 50 ± 4 mV/dB. Other specifications include Frequency Flatness of±1.2 dB, TSS of -78 dBm, Log Linearity ±1.8 dB - Measured ±1.3 dB,  Log Slope 50 ± 4 mV/dB, and Output DC Offset 50 ± 50 mV.  Power Supply: +15 V at  350 mA, -15 V at 100 mA and SMA (F) connectors. 


Read More
QPB7400

DOCSIS 3.1 Compliant Amplifier: QPB7400

RFMW Ltd. announces design and sales support for a DOCSIS 3.1 compliant amplifier from Qorvo. Gain, return loss and bias are externally adjustable on the Qorvo QPB7400. Matched to 75 ohms, this adjustable gain amplifier operates from 45 to 1218 MHz and has on-chip active bias for consistent and repeatable performance over temperature.


Read More