Menlo Micro
64 GT/s Differential Dual DP3T Relay
The Menlo Micro differential dual DP3T relay supports the high speed differential signal switching required in PCIe Gen 6, SerDes and other applications. The MM5620 is based on Menlo’s Ideal Switch® technology and can operate up to 64 GT/s or 20 GHz for high performance applications. The MM5620 has low insertion loss, fast switching speed and can operate with greater than 3 billion switching cycles. The MM5620’s integrated charge pump and driver can be controlled through SPI or GPIO interfaces by a host processor.
Mercury
Automated RF Manufacturing
By standardizing processes and technologies across multiple sites, an integrated manufacturing approach can bring trust and agility to mission-critical programs. From chip-scale microelectronics to system-scale RF integration, Mercury invests in the most advanced production technologies. Utilizing the latest in automated RF manufacturing, we make production of cutting-edge technology scalable and repeatable, supporting your ramp to full-rate production while reducing risk.
Mician GmbH
μWave Wizard
μWave Wizard software products are geared towards rapid development of passive RF components in aerospace and telecommunications. The software combines the flexibility of fast and powerful numerical methods with an appealing and ergonomic GUI that enables flexibility and openness. Typical applications include waveguide and comb line filters, feed clusters, OMTs, polarizers, circulators, multiplexers, couplers, horn and reflector antennas and more. At IMS2023, Mician will preview the latest version of μWave Wizard which will be available later in 2023.
Micro Lambda Wireless
Notch Filters
Micro Lambda's breakthrough product line of notch filters cover mmWave frequencies. This family of new Yittrium Iron Garnet based filters provide superior notch depths over the 20 to 40 GHz frequency range. Two models provide tunable notches of 15 MHz minimum at 40 dB down across the 20 to 36 GHz (MLFR-2036) and 28 to 40 GHz (MLFR-2840) bands. The 3 dB bandwidth is 100 MHz maximum for both models. Typical passband insertion loss is 3 dB and the passband range is 20 to 42 GHz.
Micro-Mode Products Inc. (Represented by Bradford RF Sales in New England)
SMPM and MSSS Calibration Kits
Micro-Mode Products offers the industry’s first calibration kits developed exclusively for SMPM and MSSS series connectors. This development was in response to a need in the industry for improved calibration accuracy above 50 GHz. Our calibration kits offer accuracy and repeatability for two-port calibration from 1 to 67 GHz using the TRL/LRL calibration method. Precision adapters (1.85 mm) are included in all our standard calibration kits. Our calibration kits are also compatible with E-CAL calibration techniques.
Micross
Hi-Rel RF Solutions
KCB Solutions, a best-in-class supplier of highly-engineered, leaded and leadless, GaN/GaAs RF and microwave switches, attenuators, amplifiers, multi-chip and functional modules in both standard and custom form, is now Micross Hi-Rel RF Solutions. Micross is the most complete provider of advanced microelectronic services and component, die and wafer solutions. With the broadest authorized access to die and wafer suppliers, and the most comprehensive advanced packaging, assembly, modification and test capabilities, Micross is uniquely positioned to provide unparalleled high-reliability solutions.
MilliBox
Benchtop mmWave Radar Testing Setup
MilliBox has a range of over-the-air test setups specifically designed for mmWave radar measurements. They feature MBX3x large cavity benchtop anechoic chamber, GIM04 three-axis DUT positioner, and up to nine fixed or moving wall-mounted trihedral corner reflectors. The new LIN05 linearly oscillating reflector mount has a programmable speed from 0.1 to 3 Hz with course from 1 to 30 mm. These affordable mmWave test setups are ideal for developers testing and tuning their radar performance at any incident angle for a wide range of use cases.
Millimeter Wave Products Inc.
High Power Amplifier
Mi-Wave’s 955A-29.3/40/41.5/KF/599HAC 14 W high power amplifier comes in a 29.3 GHz frequency with a typical small signal gain of 40 dB and PSAT of 41.5 dBm. This unit is 5G ready. In addition, Mi-Wave’s 955 Series microwave and mmWave 5G power amplifiers offer a wide variety of frequency ranges, bandwidths, gain and power outputs. All manufactured in-house in America and fully customizable to meet your 5G and mmWave needs. Consult with us for your specific needs.
Mini-Circuits
Low Noise Amplifier
Mini-Circuits’ model ZX60-14LN-S+ is a low noise amplifier (LNA) with bandwidth of 50 MHz to 10 GHz. Noise figure is typically 2.2 dB to 8 GHz and 3.62 dB to 10 GHz. Gain is typically 20.6 dB to 8 GHz and 18.2 dB to 10 GHz with full-band gain flatness of ±2.2 dB and within ±1 dB to 8 GHz. Well suited for communications, radar and test, the LNA features SMA female connectors and operates from a single +6 VDC supply.
Highpass LTCC Filter
Mini-Circuits’ model HFCV-2002+ is a low temperature co-fired ceramic (LTCC) highpass filter with passband from 19.6 to 47.0 GHz. Passband loss is typically 1 dB to 26.5 GHz and 2.2 dB or less to 47.0 GHz. Rejection is 17.8 dB or better across a stopband of 0.1 to 15.0 GHz. Ideal for cellular communications and test applications, the surface-mount technology (SMT) filter handles input power levels to 1 W. The 50 Ω filter measures 0.126 × 0.098 in. (3.20 × 2.50 mm).
Coaxial Amplifier
Mini-Circuits’ model ZVA-24443G1+ wideband coaxial amplifier covers 24.0 to 43.5 GHz with 43 dB or more typical gain. The typical full-band noise figure is 1.75 dB or better, with output power at 1 dB compression of typically +21 dBm or better. The typical third-order intercept is +27 dBm. Available with or without a heat sink, the rugged amplifier has built-in over-voltage and reverse-voltage protection and incorporates 2.92 mm female coaxial connectors. It operates from a single supply of +9 to +15 VDC.
Low Loss SMT Thru-Line
Mini-Circuits’ model TPCG-183+ SMT thru-line features low loss from DC to 18 GHz. Typical insertion loss is 0.5 dB from DC to 15 GHz rising only to 0.6 dB through 18 GHz. Return loss is typically 10 dB to 15 GHz and 9 dB to 18 GHz. The 50 Ω thru-line is a good fit for communications, radar and test systems and serves as a handy “place holder” in printed circuit boards for 0805 SMT LTCC filters. It handles as much as 7.5 W of power.
Cavity Bandpass Filter
Mini-Circuits’ model ZVBP-16R3G-S+ is a cavity bandpass filter with insertion loss of typically 0.5 dB and return loss of typically 21 dB across a passband of 15.9 to 16.7 GHz. It accompanies the outstanding loss characteristics with lower-band rejection of typically 58 dB from DC to 14.7 GHz and upper-band rejection of typically 39 dB from 17.4 to 28.0 GHz. Outfitted with SMA female coaxial connectors, the RoHS-compliant filter is ideal for isolating signals of interest in test setups.
Molex
5G 4×4 Band 7 RF Cavity Filter
This filter represents the best in performance across many parameters. It offers low insertion loss (< 1 dB), high filter-to-filter isolation (> 70 dB) and tough rejection profile. This filter can be designed for 8T8R as well. IP67-rated 4.3-10 connectors and powder coating make it suitable for extreme outdoor conditions. Size, shape and weight in die cast versions are optimized for network operators and integrators.
MPG
Printed Filters
Covering a frequency range of 2 to 30 GHz, 2 to 40% relative bandwidth and 1.5:1 VSWR these products offer an extremely small footprint and low profile. Incorporates the 50 Ω matching network giving the best performance when installed. Highpass, lowpass, bandpass and notch designs are available. These filters are suitable for the highest reliability requirements. For more information contact support@mpgdover.com or visit our website to contact an engineer today.
MtronPTI (Represented by Bradford RF Sales in New England)
Electronically Vibration Compensated OCXO
MtronPTI’s XO5503-100 is an electronically vibration compensated OCXO designed for applications where dynamic phase noise performance is critical. It incorporates an SC-cut quartz resonator and electronic vibration compensation technology, resulting in a G-sensitivity of 0.02 ppb/g. The XO5503 Series OCXO measures 2.0 × 1.5 × 0.8 in. and has a maximum weight of 70 g which is significantly smaller and lighter than the bulkier mechanically vibration compensated products and supports a wide temperature range of -45°C to +85°C with stability down to ±200 ppb.
Naprotek
Your End-to-End Manufacturing Partner
Naprotek provides unique capabilities including RF/microwave electronics manufacturing and PCB assembly, in-house semiconductor and thin film foundry capabilities and performance testing with a focus on defense, space, satcom and advanced technology applications. We offer a comprehensive RF product line of passive and active semiconductor components, from attenuators to complex thin film circuits that meet the highest industry standards. Our two U.S.-based centers of excellence provide end-to-end manufacturing solutions for prototyping and batch production, integration and test and RF microelectronics assembly.
Networks International Corp.
Ultra-Low Profile LC Filters
NIC’s engineering expertise in high-reliability RF products includes low profile (< 0.1 in.) LC filters that span from 10 MHz to11 GHz. These compact high performance filters are built on industry standard printed circuit boards, such as Rogers 4350 or 4003, and have high selectivity with an out-of-band rejection of > 60 dB. These products can be customized to meet passband requirements from 1 to 100% and pass a wide range of environmental requirements as well. Please stop by booth 1124 at IMS2023 for additional information.
Norden Millimeter
Custom Transceivers
Norden designs custom transceivers for military and commercial applications including airborne, unmanned aerial vehicle and electronic warfare. They have “catalog” models which provide wideband RF and up to 1.5 GHz IF with low phase noise. Norden can provide custom designs which incorporate temperature compensation, variable gain and meet military environmental requirements. Norden also offers models in a low SWaP 3U VPX module which includes a built-in LO. Norden engineers utilize proven designs to provide low risk, cost-effective solutions.
Nxbeam
3.5 W V-Band GaN Power Amplifier MMIC
Nxbeam expands its MMIC portfolio with the release of a new GaN V-Band power amplifier MMIC. The NPA4010-DE operates from 47 to 52 GHz and provides an average saturated output power of 3.5 W, average powe-added efficiency of 23% and average linear gain of 24 dB. The output power level of this MMIC makes it ideal for point-to-point V-Band communication links and satellite communications ground terminals.
Ophir RF
Solid-State Broadband Amplifier
Model 4147 is a 200 W solid-state broadband amplifier that covers the 6.0 to 18 GHz frequency range. This amplifier utilizes the latest Generation Class AB linear power devices that provide low harmonics, high gain and excellent stability. Due to robust engineering and employment of the most advanced devices and components, this amplifier achieves high efficiency operation with proven reliability. Like all Ophir RF amplifiers, the 4147 comes backed by Ophir RF’s commitment to total customer satisfaction.
Pickering Interfaces
RF/Microwave Switch Solutions
Defining an RFIU signal routing and distribution system can be challenging. Pickering Interfaces has a long history of providing RF/microwave switch solutions. Our solutions range from modular PXI, LXI and USB switching with bandwidths up to 67 GHz to flexible RFIU platforms and complete turnkey RFIU switch and signal routing subsystems that are tested and documented. What sets Pickering apart is our customer focus and agility, along with the performance and flexibility of our solutions.
Piconics
High-Quality Microelectronic Coil Inductors
Piconics is a world-class supplier of high-quality microelectronic coil inductors for a wide variety of applications in the space, military, telecom, test and measurement and medical electronics industries. Piconics specializes in miniature MIL-SPEC grade inductors along with tight tolerance, fine wire windings such as the broadband conical and microwave air coil inductors. The engineering team at Piconics continues the philosophy of promoting and innovating high-quality microelectronic inductors for the industries’ most cutting-edge applications.
Pletronics
OCXO
Pletronics introduce the smallest (just 7.5 × 5.5 mm – OHA4) OCXO. It offers exceptional performance for the telecom industry like small cell base station applications. It boasts tight stability, superior phase noise and good holdover and aging performance, making it an ideal solution for demanding wireless networks. With its compact size and impressive specifications, this OCXO is the perfect choice for space-constrained designs that require high accuracy and stability.
Q-Tech
Frequency and Timing Products
Q-Tech and Axtal are now part of a single organization – two technology leaders with an extensive selection of frequency and timing products for aerospace, defense, avionics, high temperature, instrumentation and master clock applications, with a global sales presence throughout North America, Europe and Asia. The Q-Tech and Axtal product portfolios combined offer a full range of crystal oscillators: XOs, TCXOs, MCXOs and OCXOs, plus additional technologies for complex modules, oscillators with multiple outputs and those with optimized performance under vibration.
Q Microwave
RF Wideband Converter, 0.5 to 18 GHz
Q Microwave's RF wideband converter is a frequency-agile RF converter, capable of converting RF frequencies between 0.5 and 18 GHz, with 500 MHz of instantaneous bandwidth, for an IF range centered at 1200 MHz (950 to 1450 MHz).
