Qorvo
Solid-State, Spatial-Combining Amplifier
No need for traveling wave tube amplifiers with Qorvo’s Spatium® QPB2040N, a solid-state, spatial-combining amplifier with an operating range of 18 to 40 GHz. With its maximum performance in output power, gain, power-added efficiency and power flatness, this Spatium is the ideal building block for various mmWave subsystems with wide-ranging applications in communications and radar. The QPB2040N provides individualized bias settings and drain pulsing up to 1.5 MHz PRF for superior power savings and noise performance.
Quantic PMI
Integrated Microwave Assemblies, Modules and Subsystems
Quantic PMI (Planar Monolithics) designs and manufactures high-quality multi-function integrated microwave assemblies, modules and subsystems for commercial, industrial and military applications up to 70 GHz built to your SCD or specifications with a variety of options including integrated amplification, attenuation, coupling, digital control, filtering, frequency discrimination, limiting, modulation, phase shifting, power detection, switching, custom packaging, hermetic sealing and military or space screening. Form, fit and functionality is our specialty.
Quantic Wenzel
3U/6U OpenVPX Frequency Source
Designed to OpenVPX standards, the 3U/6U OpenVPX frequency source is ideally suited for radar and electronic warfare applications. Developed to meet VITA 67 technology standards, the 3U/6U OpenVPX is environmentally sealed for exceptional phase noise performance to -175 dBc/Hz at 100 MHz (typical).
Reactel
Filters, Multiplexers and Multifunction Assemblies
Reactel will feature its full line of filters, multiplexers and multifunction assemblies covering up to 67 GHz at IMS2023 in San Diego. Supporting military, commercial, 5G, industrial, medical and research needs, we can design a unit that is right for you. From small, lightweight units to high-power units capable of handling up to 25 kW, connectorized or surface-mount, large or small quantities − our talented engineers can design a unit specifically for your application. Visit us in booth 614 to discuss your requirements and meet our engineers.
Remcom
XFdtd® EM Simulation Software
Remcom introduces matching network tuning functionality in XFdtd, enabling users to easily adjust component values to meet design goals and understand the behavior of a circuit. The tuning functionality is part of a new analysis workbench in XFdtd’s schematic editor. The workbench’s intuitive sliders enable rapid manipulation of inductor and capacitor values to reveal the impact of various combinations in real time. This immediacy makes additional analysis effortless while resulting in a more thorough understanding of how the circuit will behave.
RF-Lambda
400 W, 6 to 18 GHz, EMC Power Amplifier
This 400 W CW EMC solid-state power amplifier contains state-of-the-art combining technology to achieve ultra-broadband performance. Many protection features are included such as input overdrive, over temperature, current imbalance and output VSWR. A digital control attenuator with a range of 31.5 dB and a step size of 0.5 dB allows for easy integration into any RF system. A large easy to read 5-in. LCD and user keypad provide a simple user interface to make setup easy.
100 W, 18 to 40 GHz, EMC Power Amplifier
This 100 W CW EMC 18 to 40 GHz enables customers to cover from 6 to 40 GHz and 100 to 400 W with only two rack-mount units. Like the lower frequency model above, this unit contains all the same protection features, gain control and remote Ethernet connectivity. EMC amplifiers also include-automated calibration and bias compensation to correct for any changes over time and temperature. Applications include test and measurement, EMC/EMI, wireless commercial communications, aerospace, military as well as research such as particle physics.
20 to 54 GHz, Broadband Solid-State Power Amplifier
This ultra-wideband power amplifier has a frequency range from 20 to 54 GHz with 37 dBm of output power. These DC powered amplifier series provide a compact package for easy integration into any RF system or test setup. Any of RF-Lambda’s DC amplifiers can be offered in an AC powered unit (RAMPXXX series). Hermetic seal including 100% leak testing is available as per MIL-STD-883 for outdoor and harsh environments.
0.5 to 43.5 GHz, SP8T Switch
RF-Lambda’s SP8T 43.5 GHz switch can be used in a variety of RF applications where broadband high frequency fast switching is required. This RF switch provides 70 dB of isolation, a switching time of 100 ns and an insertion loss of 5 dB. RF-Lambda has a full catalog of active switches from SP2T to SP160T and power up to 1 kW. Active switches do not have a cycle lifetime when compared with electro-mechanical switch offerings so are suitable for systems requiring highly reliable switching over a long period of time.
RFMW
Solid-State, Spatial-Combining Amplifier
An excellent alternative to traveling wave tube amplifiers, Qorvo’s SpatiumTM QPB2040N is a solid- state, spatial-combining amplifier with an operating range of 18 to 40 GHz. Its integrated bias card provides individualized bias settings for each amplifier blade in the Spatium SSPA as well as drain pulsing up to 1.5 MHz PRF. With its maximum performance in output power, gain, power-added efficiency and power flatness, this Spatium is the ideal building block for various mmWave subsystems with wide-ranging applications.
RF Filter Solutions from Smiths Interconnect
Smiths Interconnect’s Planar X Series of standard bandpass filters provide system engineers with high performance, compact, lightweight solutions for critical RF filtering in X-, Ku- and Ka-Bands. The Planar X Series leverages thin film process technology on various substrates which are designed for mission-critical applications. The small footprint, lightweight and surface-mountable configuration allow for high volume pick and place applications and are ideal for radar, satcom and satellite industries.
Richardson RFPD
Design Accelerator
Start developing radio projects in minutes instead of months. Design accelerators are standardized, off-the-shelf, hardware development platforms that help RF and radio product developers reduce risk and speed time to market. Each design accelerator includes full documentation, open source or licensable software and technical support. Design files of select design accelerators may also be available via license. RadioCarbon and RadioThrorium design accelerators were developed by Richardson RFPD to support high-power software-defined radio, troposcatter, satcom and 5G mmWave communications applications.
RLC Electronics
Custom and Unique Packaging
RLC Electronics specializes in offering custom and unique packaging without unreasonable quantity restrictions or break the bank NRE. Whether the custom package is driven by performance needs or just a function of the customers densely packaged and complex next level assembly, RLC has your solution. Consider this latest example of an elegant L-Band filter with only 0.2 dB of loss, > 60 dBc rejection up to 10 GHz and the ability to handle +41 dBm at 55,000 ft.
Samtec
Threaded Compression with Alignment Features
Samtec’s threaded compression-mount connectors are uniquely designed with alignment grooves milled into the foot of the connector. With the incorporation of fiducials to the printed circuit board footprint, it becomes possible to achieve a level of positional accuracy with vertical compression-mount connectors that was previously unattainable, ensuring repeatable, peak connector performance necessary for test and measurement applications.
Siglent
SNA5000A Vector Network Analyzer
The SIGLENT SNA5000A series of vector network analyzers (VNAs) have a frequency range of 9 kHz to 8.5 GHz and 100 kHz to 26.5 GHz, which support two/four-port scattering parameter, differential-parameter and time-domain parameter measurements. The SNA5000A series of VNAs are effective instrumentation for determining the Q-factor, bandwidth and insertion loss of a filter. They feature impedance conversion, movement of measurement plane, limit testing, ripple test, fixture simulation and adapter removal/insertion adjustments.
SignalCore
40 GHz Signal Sources
The SC5520A and SC5521A are part of our ultra-high frequency synthesizer series of signal sources. They boast a frequency tuning range of 160 MHz to 40 GHz stepping at 1 Hz resolution, and an amplitude range of -10 to +15 dBm typical with phase noise among the lowest in the market. These compact modules are ideal for system integration and appropriate for applications in communication transceivers, automotive radar and optics and as clocks in modern day digital data converters.
Signal Hound
High Performance Spectrum Analyzer/Monitoring Receiver
Signal Hound’s SM435C is a high performance spectrum analyzer/monitoring receiver tuning from 100 kHz to 43.5 GHz. This next-generation SM-series analyzer includes a 10 Gb Ethernet SFP+ port, enabling communication with a PC over long distances using a fiber optic cable. Designed for affordable, remotely located, accurate RF data analysis, the SM435C is perfect for 5G mmWave monitoring and analysis, 24 GHz ISM frequency monitoring, complete Ka-Band spectrum testing and analysis of emerging and new high frequency RF signals.
Signal Microwave
TDR/VNA Probes
Signal Microwave, in partnership with DVT Solutions, is introducing the DVT-FPPXX, a 100 Ω true differential probe with bandwidths of 40, 50 and 70 GHz series to support the industry’s demand for higher data rates over differential traces. The new differential probe satisfies the need to probe PCB designs that have wide pitch test pads up to 70 GHz with a test pad pitch center to center around 1 mm.
Smiths Interconnect
Fixed Chip Attenuators
Smiths Interconnect‘s new fixed chip attenuators offer proven high performance in commercial applications. The AT Series is available in various styles from DC to 6 GHz for lower frequency requirements covering DC to 20 GHz for the broadband requirements of higher frequency, commercial, high volume applications. It provides excellent attenuation accuracy and flatness by maintaining an efficient RF power transmission. It offers a proven, robust, thick film construction in a cost-effective, easy to implement solution.
Stellant Systems
K-Band Quad Space nanoMPM®
Stellant Systems’ K-Band Quad Space nanoMPM® is a state-of-the-art RF power amplifier for use in satellite downlink applications, specifically designed to enable the next generation of software-defined satellites utilizing phased-array antennas for increased flexibility while on-orbit. This product delivers the ultimate performance by leveraging the best of solid-state and TWT vacuum technology. Utilizing a high gain predistortion solid-state linearizer, wideband high-power mini-TWT and proprietary compact nanoMPM® EPC designs, the B3400H series bridges the gap between solid-state amplifiers and traditional space linearized channelized TWTs.
SV Microwave
VITA RF 67 For Embedded Computing
Amphenol SV Microwave’s VITA 67.1/2 and .3 product lines are the latest addition to the RF section of the VPX platform. These modular solutions include contacts, cable assemblies, adapters and connector backplane and plug-in modules that support the entire RF signal path of your embedded system. Designed for implementation with other VITA connector standards. SV Microwave is an associate member of The Open Group and an active participant of the SOSA Electro-mechanical hardware group. In stock through distribution.
Tabor Electronics
40 GHz Signal Generators
Introducing the new Lucid X-Series of microwave signal generators from Tabor Electronics. The LSX family of signal generators have 8, 20 and 40 GHz frequency ranges. With phase noise better than -120 dBc/Hz at 1 GHz, fast and high-resolution frequency switching and +15 dBm of standard output power – these instruments matched some of the industries toughest requirements. Built on Tabor’s modular technology platform, the LSX family is available in PXIe, USB-modular, rack, benchtop and portable formfactors.
Taitien USA
OCXO
The new NF-16M384-7000 series is the latest addition to Taitien OCXO product line. With ultra-low power consumption of just 75 mW (typical), this series is designed to save energy without compromising on performance. It boasts a tight frequency stability of 10 ppb under the operating temperature range from 0°C to 50°C, ensuring precise and reliable timing. The low phase noise and fast warm-up time make it an ideal choice for critical applications like seismic. Choose NF-16M384-7000 series for unbeatable accuracy, efficiency and performance.
Tecdia
Dielectric Varactor
Made with a unique tunable dielectric, ideal for phase shifters, VCO’s, tunable filters and tunable matching networks with high linearity requirements. The dielectric maintains a low ESR, even up at mmWave frequencies. These varactors maintain micro-second level switching speed and are SMT compatible. We have a range of capacitance values and form factors that are available for samples upon request.
Vaunix
Programmable Digital Attenuator
The Vaunix LDA-608V-4 digital attenuator is a highly accurate, bidirectional, 50 Ω step attenuator with four independently controlled attenuator paths. It provides calibrated attenuation from 200 to 8,000 MHz with an amazing step size of 0.1 dB and typical accuracy < 0.25 dB over 60 dB of control range. For more information, visit our website.
West Bond
7KF Bonder
The 7KF bonder with our new 7-in. capacitive touch sensing LCD dis-played is designed with a gantry style chassis enabling unlimited part size capacity. Our exclusive 8:1 ratio, purely orthogonal X-Y-Z micromanipulator allows the operator to place bonds very precisely and is convertible between ball bonding and wedge bonding, presenting bond wire at both 45 and 90 degrees for deep access and ribbon bonding capabilities is an excellent tool for RF, microwave, semiconductor, hybrid and medical device fields applications.
XMA Corporation
Passive Microwave Components
XMA Corporation-Omni Spectra® is a manufacturer of passive microwave components. With design and manufacturing in the United States, XMA supplies products of the highest quality to exacting specifications to the military, aerospace, test, measurement and commercial markets.
Z-Communications
DRO-based Phase-Locked Oscillators
The new line of DRO-based phase-locked oscillators from Z-Communications, Inc. provide high frequency sources, with exceptional phase noise, packaged in an all-metal enclosure suitable for lab and field use. The FSG9000LX, at 9 GHz, provides a clean signal with -110 dBc/Hz at 10 KHz and +15 dBm output power, while drawing only 150 mA. The FSG-LX is locked with a user supplied 100 MHz reference. The FSG-LX series products are offered in frequencies from 8 to 16 GHz and offered exclusively at store.