PFEM-9D4G-CD-1 is a multi-function module that provides amplification, switching and filtering within the frequency band of 9410 MHz. This module provides two input channels and is switchable to a common output.
This model is designed to offer multiple gain level selection, high channel to channel isolation and fast switching speeds.
Specifications:
|
|
TX (State 1) |
RX Low Gain (State 2) |
RX High Gain (State 3) |
|
Max Input Power at J1 |
0dBm |
14dBm |
14dBm |
|
Frequency |
9410MHz +/- 30MHz |
9410MHz +/- 30MHz |
9410MHz +/- 30MHz |
|
Gain |
0 to -5dBm |
11 to 15dBm |
30 to 35dBm |
|
Gain Flatness |
<0.1dBm |
<0.1dBm |
<0.1dBm |
|
Noise Figure |
N/A |
2dB Nominal, 2.5dB Max |
2dB Nominal, 2.5dB Max |
|
VSWR |
1.5:1 typ |
1.5:1 typ |
1.5:1 typ |
|
OP3 (Output) |
> 18dBm |
>18dBm |
>18dBm |
|
OP2 (Output) |
>8dBm |
>8dBm |
>8dBm |
|
Port to Port J1-J3 Isolation |
>85dB |
N/A |
N/A |
|
Max Output Power |
+ 23dBm |
||
|
Output Signal Distortion |
No apparent droop or distortion with a pulse width of 500 to 1000nsec, at 500 to 2000 PPS |
||
|
Video Switching Transients |
< -120dBm above 1.7GHz |
||
|
Stability |
Unconditionally stable when terminated at J1, J2 and J3 with short circuit at all phases |
||
|
Max Out-Of-Band Gain |
Below In-Band Gain for f > 6.5GHz |
||
|
Switching Time |
50ns: TX to RX |
||
|
Switching Control |
3.3V to 5V, TTL Compatible |
||
|
BIAS V/I |
+12VDC/ 125mA typ |
||
|
Size |
2.89' x 1.62" x 0.63 |
||
|
Finish |
Painted Gray |
||
Environmental Ratings:
|
Temperature: |
-40ºC to +70 ºC Operating |
|
-40 ºC to +90 ºC Non-Operating |
|
|
Humidity: |
0 to 85% RH |
|
Shock: |
Non-Operating (Storage and Transport: 10g, 11ms, Half-Sine |
|
Vibration: |
Sinusoidal |
|
Altitude: |
10kft, MSL |
