Company Profile
Contact Information:
Phone: (301) 662-4700
Fax: (301) 662-4938
Email: Click here to see email.
Website: http://www.americanmic.com
Location:
American Microwave Corp.
7309 Grove Road, Ste. A
Frederick MD 21704
United States
Operating over Ku-Band, the AMC Model RFM-16M7 integrated switching assembly contains solid-state switches, circulators, a digital controlled attenuator, a Ku-Band solid-state source and a detector logarithmic video amplifier with digitized video output. It is designed for flight line use in conjunction with an optical delay line to provide precise pulse delays for radar calibration. 
American Microwave Corporation is pleased to announce its model CVR-120-50-CW DLVA, a form, fit, function replacement for a Teledyne detector logarithmic video amplifier part number 2277635-4. It covers the frequency range from 1 to 20 GHz with 45 dB logging range, CW Immunity, 40 nS rise time, -42 dBm TSS and 6 uSec, maximum recovery time and is utilized in the ALQ-119 jamming system.
Operating at L-Band, this SP9T solid state switch offers 1.6 dB insertion loss, >45 dB isolation, better than 1.5:1 VSWR, TTL control and handles up to 100 W CW. This part features a dual directional coupler on the input and each of the 9 outputs has a coupled port (26 dB).
The model SWN-RAYR-2DR is a single-pole, two-throw, reflective switch module with options HPE2W, HS30NS and LVT25MV.
The model SWM-6000-1DTU option 011 is an absorptive/non-reflective SPST switch that operates from 10 MHz to 6 GHz (other frequencies are available). Insertion loss is less than or equal to 1.25 dB at 10 MHz and less than or equal to 3.5 dB at 6 GHz.
The model MSN-2DT-05-IND with option 561R310H01 is an absorptive, SPDT PIN diode switch that operates from 50 to 500 MHz. This hermetically sealed switch offers a typical insertion loss of less than 1 dB, a typical isolation of 65 dB and a typical VSWR of 1.25.
The model SWN-218-2DT option NS is a single-pole, two-throw, terminated switch module that offers an insertion loss of 1.2 dB typical, high isolation of 80 dB minimum and an integral TTL driver.
A line of Detector Log Video Amplifiers, in both 40/45dB and 70dB models with a variety of available packages and capabilities. The Model No: LVD-218-50 is a 40/45dB, miniature, 2.0 to 18.0 GHz (other Frequency Bands Available), DC-Coupled, Detector Log Video Amplifier. The VSWR is 3.0:1, the RF operating input power is +13 dBm. The rise time is 20 nS and the recovery time is 200 nS Max.
American Microwave Corporation is pleased to offer our model number: MVVAN-30M3-40-SP with Options HPR2W, and FK which is a Miniature Voltage Controlled Attenuator.
SWITCHED BIT ATTENUATOR ARRAY Planar Monolithics Industries Model No: SAA-218-6-093-013542 is an Array of Six Switched Bit Attenuators (AMC Model No: SBA-218-6) operating from 2 to 18 GHz. This Assembly provides Switchable RF Attenuation for Six Signal Paths.
AMC Model No: SWM-DJV-1DT-2ATT is an Ultra-High Speed Pulse Modulator with ≤2nS Rise and Fall times with a ≤20nS Min. Pulse Width @ 50% Duty Cycle. The Modulator operates from 0.5 to 20.0 GHz and can handle RF Input Power up to +20 dBm with only ±10mV Max. Video Transient.
The model MSN-10DT-05-DEC-M options NE, 100M18, 3SS, 45004, is an SP10T absorptive switch that operates from 100 MHz to 18 GHz. Insertion loss is ≤ 2.25 dB at 100 MHz and ≤ 4.15 dB at 18 GHz. Isolation is ≥ 95 dB at 100 MHz and ≥ 60 dB at 18 GHz.
American Microwave Corp. (AMC) proudly announces its latest development an Ultra Broadband, 10 MHz to 2.0 GHz Digitally Controlled Voltage Variable Attenuator. The Attenuator has a 70dB Dynamic Range, 1.75:1 Typical VSWR (at 0dB Attenuation) and 10 Bit True Binary Logic.
American Microwave Corp. (AMC) proudly announces its latest development a SP2T, ABSORPTIVE, PIN diode switch that operates from 1.9 to 2.1 GHz. The isolation is 55 dB with an insertion loss of 2.0 dB and a VSWR of 1.8:1. The switching speed is 50 nS Rise/Fall and 100 nS On/Off at +20 dBm maximum RF input power.
American Microwave Corporation offers Model Number BT-50K18 with Options PS, and RES which is a Resistive Bias Tee Designed for 50kHz to 18 GHz Frequency Range. The VSWR is 1.75:1 Typical, and the Insertion Loss is 0.75 Typical while the Isolation is 60 dB Minimum.
The AMC Model Number: LVD-709804-50- 7193141 Option CS is a 7.9 to 8.4GHz, DC Coupled Detector Log Video Amplifier for continuous wave applications. It includes an input lowpass filter, temperature sensor circuitry, MIL-STD-461E EMI shielding, and it is environmentally sealed. Supply Voltage is +28V @ 225 mA Maximum.
American Microwave Corporation offers the Absorptive Single Pole, Single Throw Switch, Model Number MSN-1DT-AS-HPR1W Options 0518, and DJ, with the Capability of Adjusting the Rise Time in Four Discrete Steps of 25 nS ±10 nS, 50 nS ±10 nS, 75 nS ± 10 nS, and 100 nS ±15 nS through a 2-Bit Decoder Via Solder Pins and with a Low Insertion loss of 3.5 dB Typical and a Very High Isolation of 90 db Typical.
American Microwave Corp. offers Model AGTN-0320-60DD-100, a digitally controlled variable attenuator with 60 dB dynamic range. The unit is designed to operate between the 0.1 to 20 GHz frequency range with an insertion loss of 5 dB maximum, switching time of 1 uS typical (100 nS goal), and a VSWR of 2.2:1 maximum.
AMERICAN MICROWAVE CORPORATION, INC. announces an improved programmable 0.5 to 18 GHz attenuator. This incorporates a new driver circuit with faster switching and more accurate attenuation. Low insertion loss and stable operation over temperature extremes.
American Microwave offers an integrated 70 dB Detector Log Video Amplifier, Model Number: MDLVD-618-70-AD-ETHER, with a 16 Bit Digital Output through an Ethernet Interface.
American Microwave Corp. (AMC) is proud to announce the development of its Model No.: SWCH1-DC40-SK. This SPST switch operates between the DC to 40 GHz frequency range with an insertion loss of 6.8 dB maximum, isolation of 55 dB minimum, and with an ultra high speed switching time of 15 nS maximum.
The AMC Model No: MSR-8DT-07- AKG-STANDARD Option 0120 is An Absorptive / Non-Reflective SP8T, Broad Band Switch that is surface mountable, miniature in size. It works from 0.1 GHz to 20 GHz. Insertion Loss is 6 dB Maximum and has Isolation of 110 dB Minimum.
American Microwave Corp. offers Model AGT-2018-60D-100 option RW, a broad band variable attenuator/modulator with 60 dB dynamic range, designed to operate over the full 0.5 to 18 GHz frequency range with a rise and fall time of 3 uSec maximum, a VSWR of 2.2:1 maximum, an insertion loss of 5.2 dB maximum, and a transfer function of 10 dB/V.
American Microwave Corp offers a high efficiency, small size 40/45 dB DLVA with picowatt snsitivity: Model number LVD-910-85 option N-EGG. It operates over the frequency range of 9.3 to 10.8 GHz. This DLVA has a logging range of -80 dBm to -40/-35 dBm (TSS -85 dBm) minimum, with linearity error of less than ±0.75 dB and frequency flatness of ±1.0 dB.
American Microwave Corporation (AMC) Switch, Model SW-2184-1 Option 1020 is a SPST switch without an integral driver. They are broadband, nominally 2 to 18 GHz. The Option 1020 has been tuned and adjusted to perform over the bandwidth of 10 GHz to 20 GHz with a Minimum Isolation of 70dB at a Maximum Insertion Loss of 2.5dB with a VSWR of 1.9:1 Maximum.
AMERICAN MICROWAVE CORPORATION, INC. announces an improved programmable attenuator. This incorporates a new linearization circuit to enable fast and accurate attenuation switching. The new design focuses on quick settling and stable operation over temperature extremes. Switching between any attenuation level is typically settled within 1 dB in about 400ns.
merican Microwave Corporation Inc. announces an improved programmable attenuator. This attenuator incorporates a new linearization circuit to enable fast and accurate attenuation switching. The new design focuses on quick settling and stable operation over temperature extremes.
American Microwave Corp. announces its latest product development. AMC Model Number APD3-0080G-0180G-111A is an 8 to 18 GHz phase invariant digital programmable attenuator. A double balanced arrangement of quadrature couplers and pin diodes gives phase invariant attenuation. It has an attenuation range of 32 dB, insertion loss of <5.5 dB, VSWR of 2.0:1.
This Phase Invariant Digital Programmable Attenuator offers essentially constant phase, adjustable attenuation over 40 dB in the 8 to 12 GHz range. It utilizes a unique double balanced arrangement of diodes and quadrature couplers to achieve the phase independent attenuation characteristics usable over 6 to 18 GHz.
AMERICAN MICROWAVE CORPORATION, INC. announces an improved programmable 0.5 to 18 GHz attenuator. This incorporates a new driver circuit with faster switching and more accurate attenuation. Low insertion loss and stable operation over temperature extremes.
The engineers and technicians at AMC have worked together to develop a new PIN diode switch circuit that allows for excellent insertion loss and isolation. Initial configurations will be SPST and SP3T. AMC Model Number SWNN-3DR-06T is a SP3T Reflective Solid State PIN Diode Switch with very low loss.
American Microwave Corp. brings microwave integrated circuit technology to the solid-state switch matrix resulting in a hybrid switch matrix on a single substrate. Using a multilayer substrate, AMC is able to design for SMT production various configurations of RF/microwave switches with custom driver/logic circuitry and custom mechanical requirements.