The following booth numbers are complete as of April 8, 2008.
Heavy Wall Waveguide
A-Alpha Waveguide offers heavy wall WR62, WR75, WR90, WR137, WR159, 6061 aluminum waveguide tube as well as WR62, WR75, WR90, WR112, WR137, WR187 heavy wall OFHC copper waveguide tube. These sizes along with all standard size wall waveguide tube in aluminum, copper, bronze, invar and silver are in stock for immediate delivery. A-Alpha Waveguide is the exclusive North American distributor of Micro Metalsmiths’ aluminum and silicon bronze cast bends. Additional products offered include ridged and double ridged aluminum flange stock. A-Alpha Waveguide stocks all standard sizes.
A-Alpha Waveguide Co.
El Segundo, CA
Booth 1805 | RS 216
Acceleware™ brings the power of a supercomputer to your desktop; you can interpret data faster, run more simulations and improve design quality. The ClusterInABox™ Workstation harnesses the parallel processing power of graphics processing units (GPU) to deliver unrivalled performance and data processing speeds. Acceleware products seamlessly integrate with existing simulation/modeling applications, increasing their speed by up to 35 times. These products accelerate electromagnetic simulations, such as antenna design, printed circuit boards and electromagnetic compatibility (EMC).
Calgary, Alberta, Canada
Booth 751 | RS 217
This high power amplifier generates approximately 10 W (typical) of power from 20 MHz to 6 GHz in a single module. The model SSPA 0.020-6.000-10 is a medium power, super broadband, GaN RF amplifier. This PA is ideal for broadband military platforms as well as commercial applications because it is robust and offers high power over an extremely large bandwidth with good power-added efficiency. This amplifier was designed for broadband jamming and communication system platforms. It operates with a maximum base plate temperature of 85°C and is packaged in a modular housing that is 2.50" x 6.40" x 1.06".
San Marcos, CA
Booth 1911 | RS 218
The new option H18 for the E8267D PSG vector signal generator, when coupled with the N8241A or N6030A wideband arbitrary waveform generators will enable 1 GHz wide waveforms at all carrier frequencies now including below 3.2 GHz. If you use your own baseband IQ waveform, the E8267D PSG vector signal generator can modulate signals with up to 2 GHz of RF modulation bandwidth. This option will be particularly useful for wideband communications and radar applications operating in the L-band and S-band.
Agilent Technologies – Signal Sources Division
Santa Rosa, CA
Booth 1123 | RS 219
USB-based Average Power Sensors
The Agilent U2000B, U2000H, U2001B, U2001H and U2002H USB-based power sensors are the latest addition to Agilent’s U2000 series, which was released in 2007. These new power sensors have built-in attenuators to enable power measurement up to +44 dBm, eliminating the use of an external attenuator. This reduces equipment set up time and wear and tear of the bulk head connector. Each power sensor comes with the upgraded Power Panel software N1918B that offers time-gated capability for RF burst signal measurement and improved Graphic User Interface. The USB power sensors will be available from July 2008.
Agilent Technologies – Basic Instrument Division
Santa Clara, CA
Booth 1123 | RS 220
The model SWCH1-DC40-SK is an SPST switch that operates in a frequency range from DC to 40 GHz. This switch offers an insertion loss of 6.8 dB maximum, isolation of 55 dB minimum, and an ultra high speed switching time of 15 ns maximum. The switch has 1.85 mm “V” connectors for the input and output ports.
American Microwave Corp.
Booth 912 | RS 221
This amplifier operates in a frequency range from 12 to 18 GHz. The amplifier is a breakthrough in amplifier technology because the noise figure is 0.9 dB over the entire band. Not only is the noise figure consistent across the band, but so is the gain and output power. The APT2-12001800-1105-D2 is available in the company’s smallest housing (D2).
Booth 1609 | RS 222
High Performance Signal Generator
The new APSIN3000 is a compact, PC-controlled high performance signal generator with wide frequency coverage from 9 kHz to 3.4 GHz with sub-Hz resolution and broad power range up to 15 dBm. It provides excellent signal quality with better than –120 dBc/Hz phase noise (1 GHz, 20 kHz offset), < –40 dBc harmonics and < –65 dBc spurious. It has an internal OCXO reference and can be locked to an external reference. The APSIN3000 is available with an optional internal battery and weighs less than 3 kgs.
+41-44-440 00 51
Booth 2118 | RS 223
The DB5248 is a cavity dual bandpass combiner used in INMARSAT communication with PB1 at 1524 to 1560 MHz, PB2 at 1626.5 to 1660.5 MHz, insertion loss in both passbands = 2 dB maximum and isolation > 40 dB typical built-in a package size of 160 x 82 x 48 mm maximum. Anatech Electronics also offers other cavity dual bandpass combiners with low insertion loss, steep rejection and high power handling capacity.
Anatech Electronics Inc.
Booth 2222 | RS 224
Waterproof QMA Connector
This waterproof QMA connector (CQMA) is a high performing quick lock SMA (QMA) con-nector. One hundred percent mateable with earlier QMA designs, the CQMA distinguishes itself by way of its waterproof seal (IP68) and the lowest VSWR available in frequencies up to 18 GHz. This is in addition to all the standard benefits snap-on coupling has over SMA’s threaded interface i.e., 10x faster mating, denser packaging and the ability to rotate the connector 360° while in the mated position.
Anoison Electronics Ltd.
Zhenjiang, Jiangsu, China
+86 511 8590 0277
Booth 2129 | RS 225
Process design kits (PDK) in AWR’s Microwave Office design suite now leverage the latest innovations of ACE™, APLAC® and AXIEM™ technologies. Current foundries include TriQuint Semiconductor and WIN Semiconductors, and more will be available soon. The PDKs reduce the time required to go from design concept to working product by seamlessly integrating the full capabilities of Microwave Office software with those of the foundries.
Applied Wave Research Inc. (AWR)
El Segundo, CA
Booth 923 | RS 226
This solid-state amplifier family operates in a frequency range from 8 to 20 GHz. Model 5S8G20A offers 5 W of power and model 20S8G20A provides 20 W. Both models are perfect for EMC and wireless testing. Like the other members of the “S” series amplifiers, both models are extremely tough, durable and are full Class A. These models have superior linearity and are 100 percent VSWR tolerant.
AR RF/Microwave Instrumentation
Booth 1409 | RS 227
A new book on one of today’s fastest-growing technologies, RFID (Radio-Frequency Identification) makes its debut appearance at IMS 2008. RFID Design Principles by Harvey Lehpamer explores the growing role of RFID in applications ranging from supply chain management and intelligent building design, to transportation systems and defense. The book introduces readers to the essential technical details and organizational considerations that are critical to successful RFID system planning. This book and other recent and classic titles are offered at a 20 percent discount at the Artech House booth # 613.
Booth 613 | RS 228
Small Amplifiers for Multiple RF Applications
With miniature 0402 package dimensions and no wirebonds, the innovative VMMK-2x03 amplifiers experience almost no signal loss and minimal parasitics. Its ultra-small size and fully matched SMT design are optimized for 500 MHz to 12 GHz frequencies, making these high performance devices ideal to place in a variety of radio architectures.
San Jose, CA
Booth 509 | RS 229
Low Noise Amplifiers
These low noise amplifiers are designed for the military band of 17.8 to 21.2 GHz. The BZ3-17802120 series exhibits noise figures as low as 1.5 dB with output 1 dB compression point of +15 dBm. Gain can be specified up to 45 dB with flatness of ±0.5 dB. Phase linearity is ±2° maximum. Unit-to-unit phase tracking and gain tracking is available. The operating temperature is –55° to +85°C. This series is offered in the B&Z Ultra Chassis that measures 0.44" x 0.74" x 0.30". The Ultra Chassis ships with standard coaxial connectors that can be field removed to use the amplifiers as a drop-in.
Stony Brook, NY
Booth 350 | RS 230
Barry now offers high temperature co-fired ceramic (HTCC) products—microwave semiconductor packaging, i.e., chip carriers, diode packages via Semiconductor Enclosures Inc. This coupled with low temperature co-fired ceramic (LTCC) design and production makes Barry a total ceramics solutions provider. Barry product offerings include: LTCC products, HTCC products; semiconductor packages; high power terminations, resistors, attenuators and surface-mount products; pulsed power devices, WiMAX product selection; low capacitance resistors; low power precision chips; machining and plating services.
Barry Industries Inc.
Booth 805 | RS 231
Laser Cut Epoxy Pre-forms
Bonding Source is the only company in the US that stocks conductive and non-conductive epoxy film manufactured by Emerson Cuming and Ablestik. Laser cut epoxy pre-forms can be shipped in five to 10 days. Primary uses of the epoxy pre-forms are mounting PCBs and hybrid circuits to carriers or housing. Pre-forms can be drop shipped to off-shore manufacturing sites with JIT shipments to match production schedules. Bonding Source also stocks epoxy pastes, bonding wire and bonding tools, and has no minimum order requirements.
Booth 2217 | RS 232
Wafer Probe Station
Cascade Microtech introduced the next step in 300 mm wafer probe stations designed to meet the worldwide need for advanced on-wafer measurements for semiconductor devices. Based on the company’s wafer probing products, the Elite 300 sets a new standard for extremely accurate and reliable 300 mm wafer probing for devices with process nodes at 45 nm and below. The Elite 300 solves the critical measurement challenges at each advancing technology node by incorporating state-of-the-art electrical and mechanical technology, advanced materials and leading-edge measurement techniques. Price: $80,000 to $400,000. Delivery: 12 weeks upon receipt of order.
Booth 1144 | RS 233
Gain Sloped-equalized Amplifiers
These gain sloped-equalized amplifiers are designed for TWT drivers and subassemblies where gain equalization/sloping is required to help offset cable loss-variation. Positive or negative gain equalization/sloping is available over ultra-broadband ranges of 2 to 18 GHz, 6 to 18 GHz as well as typical tri-band frequencies common for SATCOM applications. Ciao offers from 2 to 20 dB of gain sloping/equalization range with customized gain, output power (up to +24 dBm) and noise figure values to meet specific requirements. Units feature good harmonic performance and are unconditionally stable. Delivery: two to four weeks ARO.
Ciao Wireless Inc.
Booth 738 | RS 234
The model CCDP-222 is a diplexer that operates at the 2.4 GHz WiMAX band. This diplexer is designed to provide combining or splitting of narrow band signals. The diplexer may be specified with center frequencies ranging from 2.3 to 2.5 GHz with a minimum of 50 MHz channel-to-channel separation. Individual channel bandwidth is 20 MHz. The diplexer is provided with a Type ‘N’ Female connector on the common port and SMA female connectors on the in/out ports.
ClearComm Technologies LLC
Booth 1533 | RS 235
Rapid Prototyping System
This Rapid Prototyping System (RPS) is a laser-based system for quick turn thin film sub-mounts and patterned copper microwave laminate materials such as Duroid and Arlon. With this process it can provide 2 mil traces and line spacing without the cost and lead time of producing a mask. Whether one piece or high volume is needed, the company can supply the parts in the shortest time possible.
West Berlin, NJ
Booth 1833 | RS 236
The CVCO55CC-1260-1400 voltage-controlled oscillator (VCO) operates from 1260 to 1400 MHz with a control voltage range of 0.5 to 12 V. This VCO features a typical phase noise of –115 dBc/Hz at 10 kHz offset and has excellent linearity. The model is packaged in the industry-standard 0.5" x 0.5" SMD package. Input voltage is 8 V, with a max current consumption of 35 mA. Pulling and pushing are minimized to 0.20 MHz and 0.20 MHz/V, respectively. Second harmonic suppression is –20 dBc typical. Price: starts at $18.46 each in volume.
Fort Myers, FL
Booth 2215 | RS 237
CST will be previewing the upcoming release version 2009 of its flagship product CST MICROWAVE STUDIO® (CST MWS). Fully integrated in CST STUDIO SUITE™, CST MWS helps designers solve electromagnetic problems, utilizing new solver technology, sophisticated filters, and automated optimization and parametric studies. Highlights of version 2009 include: transient EM/circuit co-simulation using the recently acquired Linmic circuit simulation technology, an MPI implementation for the fast solution of large problems on clusters, and the porting of the user interface to 64 bit in order to handle the increasing complexity of imported models. CST STUDIO SUITE will be enhanced by two new members: CST PCB STUDIO™ and CST CABLE STUDIO™. They will be integrated into CST DESIGN ENVIRONMENT and will further increase the SI and EMC capabilities inside CST STUDIO SUITE. Results can be used in CST MWS as field sources for further evaluation.
CST of America® Inc.
Booth 933 | RS 238
Two-channel IF Conditioner Subsystem
This digitally-controlled two-channel IF conditioner subsystem was designed to address com-monly encountered receiver issues including spurious emissions, harmonics and leakage, from both external and internal sources, which can cause degraded performance. To minimize such spurious interference in the 750 to 1250 MHz frequency range, CTT designed a VMEbus compatible subsystem with a proprietary intermediate frequency (IF) conditioning design that will find acceptance in many communications systems. The first in a family of VMEbus-compatible subsystem designs, the IF conditioner offers specifications including: RF input power of +5 dBm (max); gain flatness of 1 dB (max) at 775 to 1225 MHz, 3 dB (max) at 750 to 1250 MHz; noise figure of 10 dB (max) and attenuator control of 0 to 40 dB.
Booth 1231 | RS 239
Switches and Systems
Dow-Key manufactures and custom designs switches and systems for the commercial, military, wireless and Hi-Rel space industries. The company specializes in a broad range of RF coaxial relays operating from DC to 40 GHz, waveguide switches (operating to 70 GHz), T-switches, RF coaxial and solid-state matrices, PXI modules and L-band duplex switching systems.
Dow-Key Microwave Corp.
Booth 1514 | RS 350
The 2S series features SMA connectors and a frequency range of DC to 18 GHz. The 2SE series also features options for SMA connectors and a frequency range of DC to 26.5 GHz. Both series are available with failsafe, latching self cut-off or pulse latching options. These connectors offer an RF impedance of 50 Ω nominal; operating temperature (failsafe) of –55° to +85°C ambient; operating temperature (latching) of –25° to +85°C ambient; operating life of 1,000,000 cycles minimum and a break before make switching sequence. Weight (max): 2.1 oz.
Ducommun Technologies Inc.
Booth 503 | RS 351
High Frequency Simulation Suite
With the release of HFWorks 2008, high frequency field simulation has never been easier. This latest release completes ElectroMagneticWorks’ suite of high and low frequency field simulator solutions, which are fully embedded inside the leading PC-based CAD software: SolidWorks®. The combined power of SolidWorks and ElectroMagneticWorks’ proven FEM solver technology provide industry-leading field simulators to enhance productivity in the most user friendly environment.
Montreal, Quebec, Canada
Booth 1753 | RS 240
Phase-Locked Crystal Oscillators
The PLXO series of phase-locked crystal oscillators are now available with significantly improved performance and smaller size. With the option of a surface-mount or connectorized package, PLXO offers several outputs: sine 7 dBm, 10 dBm, CMOS and PECL. The new smaller-sized surface-mount package (0.9" x 0.9" x 0.25") also features exceptionally low phase noise characteristics (< –140 dBc/Hz at 1 kHz typical) and enhanced spurious response (< –65 dBc). PLXO is available in fixed frequencies between 5 and 420 MHz with a lock range of ±5 ppm.
EM Research Inc.
Booth 2138 | RS 241
Ceramic Resonator-based Oscillator
The CLX series synthesizer is a ceramic resonator-based oscillator with exceptionally low phase noise, –110 dBc/Hz at 10 kHz offset. This series is an internally-programmed fixed-frequency unit in a small, 0.75" x 0.75" SMT package. Optimized loop performance for overall low RMS noise. Available in custom fixed frequencies from 200 MHz to 4 GHz. External frequency references from 5 to 250 MHz. Buffered outputs up to +13 dBm. Optional RoHS compliance.
EM Research Inc.
Booth 2138 | RS 242
The model 3164-08 is an open boundary quad-ridged horn antenna designed to meet the demands of UWB, GSM, PCS, Wi-Fi and WiMAX testing. Big on performance, yet compact in design, the “open boundary” design makes this antenna unique in both appearance and capabilities. Notable features include excellent gain over the frequency range with low VSWR. For added convenience, the model 3164-08 antenna can be used on a tripod with an included flange mount, or placed in a chamber with an optional wall plate mount.
Cedar Park, TX
Booth 304 | RS 244
The new waveguide high power termination family covers C-band and Ku-band at powers up to 3 kW. It features aluminum-extruded heat sink with optimized distribution to maximize power handling. Heat sink patterns are available for vertical and horizontal installations. A typical example is a 1200 W Ku-band unit covering a frequency range of 14 to 14.5 GHz with a VSWR of 1.1 maximum with dimensions of 5.2" x 5.2" x 15". The waveguide flange can be ordered in any standard pattern.
Filtel Microwave Inc.
Booth 2018 | RS 245
Gold and Silver Air Core Inductors
These build-to-print gold and silver air core inductors are designed for customer-specific applications. The inductors are un-insulated, space wound, with ID ranging from 0.020 to 0.080 inches, and wire diameter as fine as 47 AWG. Customers determine wire size, wire material, number of turns, coil ID, spacing between turns and lead exit/length. Gold inductors are ideal for high frequency micro-circuit applications requiring gold-to-gold interconnections (typically thermally bonded to the circuit); silver inductors (silver-plated copper) are used for similar applications, but are typically soldered to the circuit.
Booth 2032 | RS 246
High Frequency OCXOs
The YH1518 series of OCXOs operate in a frequency range from 110 to 250 MHz. The YH1518 series design utilizes a precision SC-cut crystal to achieve low noise performance with an internal assembly thermally efficient housed in a small 1.06" x 1.42" x 0.5" hermetic package. Supply is +12 VDC and typical temperature stability of ±0.07 ppm over –40° to +70°C. A sinewave output of +3 dBm minimum (+6 dBm typical) is provided.
Booth 2233 | RS 247
PiQC is a multi-dimensional control system that monitors the most applicable and significant measures to judge wire bond quality. For the first time in the wire bonding market, every physically relevant aspect of every wire bond connection is evaluated in real-time, providing individual quality indices to compare to ongoing real-time data. These measures are acquired during the bond process to avoid impact on machine throughput, enabling throughput-neutral, 100 percent quality control. This newly developed quality control system relies only on actual data, without any statistical assumptions.
Hesse & Knipps Inc.
San Jose, CA
Booth 1149 | RS 248
This SDLVA operates in a frequency range from 0.1 to 20 GHz, provides 65 dB of dynamic range and ±2 dB frequency flatness, and is ideally suited for EW/ELINT and radar systems. This device processes RF pulses with amplitudes from –55 to +5 dBm with 10 ns rise times and only 100 ns of recovery time. VSWR is specified at 3.0 and sensitivity is –55 dBm typical. The HMC613LC4B consumes 85 mA from a +3.3 V supply and is specified for –40° to +85°C operation.
Hittite Microwave Corp.
Booth 1345 | RS 249
Ultra-low Phase Noise Source
Holzworth demonstrates phase noise test capability with the HS1001 USB/Ethernet-controlled ultra low phase noise source. This 8 MHz to 1.024 GHz synthesizer (option to 4 GHz) has typical phase noise performance of –130 dBc/Hz at 1 GHz (10 kHz offset). Adjustable output power from –110 dBm to +15 dBm, harmonics below –30 dBc and spurious levels below –60 dBc. Compact form factor is 100 percent USB powered with DC-coupled AM/FM/PM and pulse modulation capabilities. When operated with an appropriate FFT analyzer, accurate phase noise measurements are possible.
Booth 409 | RS 250
This RF power switch is small, reliable, powerful, easy to handle, requires little maintenance and is therefore cost-effective to use. The switch promises best benefits for customers—everywhere where switching between channels is required. The ‘plug and play’ concept perfectly sums up this particular switch, which is quick, easy and convenient to install and operate. The new switch saves an enormous amount of space and guarantees indirect benefits for mobile phone users and network operators. The design of the RF power switch can be adapted to suit the specific requirements of customers.
+41 71 353 4111
Booth 701 | RS 251
Fully Automatic Assembly Capability
This fully automatic assembly capability is designed for high frequency module assembly. New capabilities include automatic epoxy die attach on the Newport MRSI work cell and automatic wedge/ribbon bonding on the Hesse & Knipps Bondjet wire bonder. Other automatic capabilities include ball bonding, aluminum wedge bonding, epoxy dam and fill, and a Mydata surface-mount line. IKE Micro is ISO 9001:2000 certified, ITAR compliant, and serves the defense and commercial RF electronics industries.
Booth 2219 | RS 252
EMPIRE XCcel™ 5.15
The new 3D EM solver EMPIRE XCcel 5.15 covers nearly all today’s design challenges for RF designers, like antennas, passive circuits, packages, waveguides or EMC/EMI problems. Due to the unique structure and processor adapted code generation a simulation performance up to 1600 Million FDTD Cells per second can be achieved on a conventional PC with full access to the built-in memory. Thus, complex structures can be modeled fast and accurately.
+49 2842 981 0
Booth 1746 | RS 253
LDMOS RF Power Transistors
This family of LDMOS RF power transistors is targeted to GSM/EDGE applications in the 920 to 960 MHz and 1805 to 1880 MHz frequency bands. These new transistors feature 50 W average output power at 920 to 960 MHz and 45 W average output power at 1805 to 1880 MHz. These products feature a thermally-enhanced open cavity plastic package with copper flanges with less than 10 micro inches of gold plating. This eases the soldering process by eliminating the costly de-golding step from the PCB assembly process providing significant savings.
Booth 1216 | RS 254
RF and Microwave Amplifier Systems
This versatile amplifier system can be tailored to meet any customer’s requirement and application. The RS1802-1KW-500 is an ideal integrated system for EMC applications. This system includes the company’s SMCC1000, 1000 W amplifier for 200 MHz to 1 GHz as well as its 500 W amplifiers for 1 to 18 GHz (1 to 2.5 GHz, 2.5 to 7.5 GHz and 7.5 to 18 GHz). It is a versatile state-of-the-art design that can be tailored to meet customers’ specific requirements for frequency range and RF output power levels. These systems can include any combination of pulse, CW or gridded amplifiers in compact solutions.
Instruments for Industry Inc.
Booth 2007 | RS 255
These cost effective 0404 size thick film on alumina attenuators are available in –1 to –10 dB attenuation values in 1 dB increments with attenuation accuracy starting at ±0.3 dB. Operating frequency for the IMS2479 is DC to 3 GHz with a rated power of 40 mW. These attenuators are especially suited, but are not limited to, RF and microwave applications.
International Manufacturing Services Inc.
Booth 1808 | RS 256
Synthesized Local Oscillator
The WaveCor Synthesized Local Oscillator (SLO) is the next step in the evolution of digital synthesizers and features a frequency range of 50 MHz to 20.48 GHz, switching speed of 10 μs, and a tuning resolution of 1 kHz in a compact 6" x 6" x 2.75" package. Continuing WaveCor’s tradition of low phase noise and spurious performance, the WaveCor SLO is a low-cost alternative to YIG-based synthesizers.
ITT Microwave Systems
Booth 1917 | RS 257
Power Amplifier Design Library
This Power Amplifier (PA) Design Library is designed for the company’s 0.18 micron SiGe BiCMOS process, reducing design cycle time by providing validated PA cells ready for use with a custom power cell design flow. Combined with Jazz’s rich library of high quality passive devices including thick inductors and high density MIM capacitors, complete PA design is enabled. The PADL delivers a full PA design flow from schematic to layout including device models characterized over DC, temperature, small-signal and large-signal load pull measurements.
Newport Beach, CA
Booth 416 | RS 258
K&L Microwave has developed TEM-mode cavity filter 6FV-7500/E500-SMT, and its asso-ciated family of filters to be soldered on RO4003 12-mil printed wiring board (PWB). The design maximizes available Qu within the low profile of 0.3" and offers the flexibility of low loss, leadless construction and simplified electronic PWB stuffing, while maintaining RF matching. In addition, this family of filters can be hermetically sealed.
Booth 1506 | RS 259
High Performance Frequency Synthesizer
This WiMAX Fractional-N synthesizer in IBM 7WL process delivers a –116 dBc/Hz phase noise performance and –90 dBc spurious response at 6 GHz output. High phase noise and spurs can cause tremendous problems for system designers. Error vector magnitude (EVM) is a tight requirement for OFDM systems such as WiMAX. Phase noise causes a jitter in the EVM, whereas spurs cause EVM offsets. This leads to unacceptable packet error rates or low data throughput rates.
Kaben Wireless Silicon Inc.
Ottawa, Ontario, Canada
Booth 2230 | RS 260
Keithley simplifies MIMO testing with its model 2820 RF signal analyzers and model 2920 RF signal generators, designed to the requirements of 802.11n WiFi and 802.16e WiMAX multi-input, multi-output communications (MIMO) standards. The model 2895 MIMO synchronization unit provides precise, stable alignment between instruments. The model 280111 MIMO signal analysis software has an extensive measurement suite for analyzing up to 16 signals of an 802.11n WLAN device with 4x4 MIMO channels.
Keithley Instruments Inc.
Booth 727 | RS 261
Ultra-fine Resolution CRFM
The CRFM-9041 is a wide bandwidth, ultra-fine resolution Coherent Radio Frequency Memory (CRFM). Sampling at 2200 MHz, the CRFM captures, stores and replays RF signals, delaying the signal up to 7.5 ms with 1 ns resolution. The CRFM is a multi-functional test asset for development of EW, radar, seeker and communication systems. Up to 1 GHz instantaneous bandwidth is available with –45 dBc spurs. Highly configurable for any combination of ECM, radar environment and arbitrary waveform (exciter) signal generation. Latest DSP technology performs amplitude/phase modulation and fine resolution Doppler. The CRFM fits into a 5-slot 6U VME card cage, and is supplied with single board computer, master oscillator, power supply and either a desktop or rack mount enclosure.
Booth 2110 | RS 262
Switch Filter Amplifier
This switch filter amplifier (SFA) series is available in both ceramic and lumped element configurations. The SFA series offers wide frequency of 100 to 3000 MHz and bandwidth ranging from 1 to 40 percent, with a typical return loss of 18/14 dB. The noise figure of 1.5 to 5 dB combined with 300 ns switching speed, 10 to 40 dB gain and bias of +10 VDC, +5 VDC make the SFA series ideal for receiver applications and improvement of overall system performance.
Lark Engineering Co.
San Juan Capistrano, CA
Booth 532 | RS 263
The model UB61000-040 is an X-band, 10 W miniature BUC. This unit is designed for indoor or outdoor use in commercial or military and military Manpack miniature SATCOM systems. This unit can be mounted on the antenna for maximum efficiency of operation or can also be supplied without heatsinks for ease of system integration. The company provides LNAs, SSPAs and converter products for a variety of communication needs.
Locus Microwave Inc.
Booth 504 | RS 264
PCS/AWS Cavity Combiner
Lorch Commercial and Wireless (LCW) offers WP-D00002, a combiner that provides a solution for utilizing a single antenna for the full personal communication system (PCS) and advanced wireless services (AWS) frequencies. The combiner exhibits less than 0.25 dB of insertion loss across the passbands of 1850 to 1990 MHz and 1710 to 1755/2110 to 2155 MHz while providing greater than 80 dB of isolation. The unit measures 11" x 7.5" x 2.3" and is available from stock. Other mechanical configurations are available.
Booth 1529 | RS 265
The MECA MFK-PMK-1 power measurement kit replaces high power attenuators as a means of reducing RF signal levels into sensitive power meters. Directional couplers have low insertion loss and high directivity so the sampled power is extremely stable and isolated from changes as power levels increase. Rugged, hard-shell case with form-fitting foam insert. Delivery: stock to four weeks. Product is made in the USA.
Booth 714 | RS 266
MESL Microwave has launched a range of space-qualified package drop-in and substrate drop-in isolators and circulators. These devices are available with either MIC, tab or coaxial interfaces and are initially for C-, X- and Ku-band applications with other frequencies to follow. These devices have 0.5 dB insertion loss, 23 dB isolation and 21 dB return loss over a temperature range of –20° to +80°C.
MESL Microwave Ltd.
+44 131 333 2000
Booth 436 | RS 267
Drop-in Isolators and Circulators
MICA Microwave, a division of Micronetics, introduces its newest stripline drop-in isolator and circulator family, the SMD product line. The SMD series is a small and durable 0.50 diameter x 0.24 thick true surface-mount package. It has been designed to cover frequency requirements between 4 to 15 GHz in bandwidths up to 20 percent. The unique surface-mount launching construction allows for direct placement onto a PC board without adding counter-bored receptacles. Typical performance of the unit is 20 dB isolation, 0.5 dB insertion loss and 1.25 VSWR with forward power levels up to 20 W.
MICA Microwave Corp.
Booth 516 | RS 268
Version 6.6 of the EM-software tool μWave Wizard™ includes a set of new elements that have been developed for the radiation library that exploit the body of revolution (BOR) symmetry of circular waveguide horn antennas. The elements coincide with the specifications for various horn profiles, like vertically and axially corrugated horns, profiled smooth wall, ring loaded and Potter horn profiles. This eases the setup of the entire horn geometry since the process is now carried out automatically inside the element and accelerates the computation for multi-mode and tracking mode applications due to utilization of the BOR symmetry with the mode-matching method. Calculated electromagnetic fields within these elements can either be visualized in longitudinal cuts or the maximum values can be plotted versus frequency. This allows a faster evaluation of power handling capabilities for such structures.
+49 (421) 16899351
Booth 1045 | RS 269
These blind-mate, high reliability coaxial attenuators offer amazing performance in a small footprint. Available in both standard and temperature variable versions these attenuators work up to 18 GHz and are available in 1/2 dB increments.
Micro-Mode Products Inc.
El Cajon, CA
Booth 1752 | RS 270
The model HMBC-150HJ is a highpass filter with a passband from 0.5 to 18 GHz. This miniature device discriminates a desired band of frequencies from all unwanted RF signals below a specified bandpass. The HMBC filter has uses in many types of military applications, including: EW, radar and communications systems, as well as aerospace and weather satellite systems. The main advantages of the Microphase-designed and engineered HMBC highpass filter are its small size and excellent RF performance with extended stopbands. This filter has a cut-off frequency of 0.5 GHz with a passband to 18 GHz.
Booth 602 | RS 271
The model TNM-114 is a Type N termination that operates in a frequency range from DC to 2.5 GHz. Also available in SMA models, large volumes of these terminations are kept in stock and priced for quick delivery.
Microwave Communications Laboratories Inc.
Saint Petersburg, FL
Booth 2026 | RS 272
The model 16866 is a multiplexer that offers three operating bands over a wide range of frequencies (30 to 90 MHz, 115 to 400 MHz and 450 to 2000 MHz). This unit is ideal for commercial or military applications that require a compact design and reliable isolation due to the co-location of the three transmission sources. MFC is an ISO9001:2000 registered company.
Microwave Filter Co. Inc.
East Syracuse, NY
Booth 2014 | RS 273
Fast EM CAD and Optimization Tool
WASP-NET® ends the quest of microwave design engineers for high simulation speed by its unique hybrid MM/FE/MoM/FD CAD engine, which yields EM precision in seconds. The new releases of WASP-NET will, among other things, provide a new graphical user interface (GUI), utilizing all modern operational and user-defined conveniences for highest user-friendliness, combined with a new quality of EM CAD and optimization efficiency by improved algorithms. WASP-NET application examples include: fast optimization of all types of waveguide components and aperture antennas/arrays; full-wave synthesis of waveguide and combline filters; cross-coupled and LTCC filters; dielectric resonator filters; dielectric loaded horns; shaped subreflectors; squarax and stripline elements; and large-sized structures, e.g. slot arrays, reflectors and antennas with radomes.
Microwave Innovation Group (MiG)
GmbH & Co. KG
+49 421 223 7966 0
Booth 709 | RS 274
The AMC series of full-band active multipliers extends the range of coaxial signal sources from 8 to 20 GHz to the complete millimeter-wave spectrum from 18 to 140 GHz in all common waveguide bands. The AMC series features high output power, low power dissipation, built-in bias protection, optional multiplication configurations and rugged packaging. Outputs are available in eight waveguide bands from WR-42 to WR-08. Watch for a high power (13 dBm) full-band WR-10 version and a full-band WR-06.
Booth 1522 | RS 275
This GaAs MMIC low noise amplifier (LNA) is offered in an RoHS compliant, standard 3x3 millimeter QFN plastic package, covering 20 to 38 GHz. This LNA, identified as XL1010-QT, delivers 3 dB noise figure and 17 dB small-signal gain and is well suited for multiple receiver applications that require broadband performance with simple bias requirements. The XL1010-QT also includes on-chip ESD protection structures and DC bypass capacitors to ease implementation and volume assembly. Samples are available today from stock, along with production quantities in six to eight weeks.
Mimix Broadband Inc.
Booth 1423 | RS 276
On land, sea and in the air, demanding critical applications call for a switch that is a cut above the rest. Mini-Circuits’ rugged CSWA2-63DR+ ceramic RF/microwave SPDT switch is that switch. From 0.5 to 6 GHz this switch operates in the absorptive mode (good output VSWR in off state) and from 0.3 to 500 MHz in the non absorptive mode (output ports reflective in off state). The CSWA2-63DR+ at only 4 x 4 x 1.2 mm handles tight spaces; provides protection against high moisture environments and offers outstanding performance. For tough RF/microwave switch requirements in commercial, industrial or military applications, think Mini-Circuits’ new ceramic switch. Price: from $4.95 each (Qty. 10 to 49).
Booth 1937 | RS 277
The model SW5-005180AI3NF-S0001 is an absorptive single-pole five-throw (SP5T) switch that operates in a frequency range from 500 MHz to 18 GHz with a minimum of 60 dB isolation and VSWR of 2:1 maximum. The four-bit input control word is TTL compatible and commands switching time from 50 percent control input to the 10 to 90 percent settling within 100 ns. Rise/fall time is < 20 ns typical. The power handling capability is 20 dBm. This model measures 1.7" across (including connectors) and is 0.37" thick. Weight: 19 grams.
Booth 1108 | RS 278
This upgraded version of Modelithics capacitor-inductor-resistor model library adds scalable 01005, 0201, 0402 and 0603/0604 sized capacitor and inductor Global Models from vendors like AVX, Murata, Taiyo-Yuden, Coilcraft, Toko and TDK. Version 5.02 is currently shipping for Agilent’s ADS, AWR’s Microwave Office and Agilent/Eagleware’s Genesys EDA software. CLR Library models are part-scalable, substrate-scalable, with a number of advanced features now offered in many models such as pad-scalability, pad-removal and orientation (H/V) selection. For ADS and MWO users, this library includes a new feature with which the layout geometry for pad-scalable models will now be automatically updated to match user-specified values for the pad dimension parameters. Versions of the CLR Library are also available for Ansoft Designer and Cadence Spectre RF.
Booth 746 | RS 279
WiMAX Cavity Filter
Utilizing a re-configurable platform fully modeled in EM simulation software and tested with a stringent design verification process, the WiMAX cavity filter series covers the 2.3 to 2.7 GHz frequency range with emphasis on low loss narrowband applications. WiMAX cavity products features include: passband center frequency from 2.3 to 2.7 GHz, suited for mobile and fixed WiMAX, WiBro and Wi-Fi applications; 0.04 to 0.2 percent 1 dB bandwidth available; and use as an Rx and/or Tx filter. Duplexers can be developed using the same re-configurable platform.
Booth 2000 | RS 280
48 V DC-DC Converters
This MPD7D06*S 48 V input isolated DC-DC converter series is developed to provide optimal power selection flexibility. The new device allows engineers to easily scale from low to high power and vice-versa in the design stage. This saves valuable time and money during the board layout and presents the opportunity to add new features or make changes without altering said layout. This ability is especially appealing to router, computer server, optical backbone, FTTx, Public Branch Exchange (PBX) and fixed wireless access applications. The increased scalability is enabled by the MPD7D06*S’s parallel operation feature and footprint compatibility with the 10 W MPD6D10*S series and the 15 W MPD6D11*S series DC-DC converters.
Murata Electronics North America
Booth 1103 | RS 281
Narda Microwave-East will showcase its innovative approach to microwave integrated circuit design at IMS 2008. The company’s techniques deliver unprecedented levels of analog, microwave and digital integration, along with extensive use of FPGAs for high speed signal processing and temperature compensation. The result is compact, multifunction modules that can be produced at lower cost in high volumes with high levels of performance.
Booth 1600 | RS 282
Temperature-compensated Crystal Oscillator
The NT2520SA series is an SMD temperature-compensated crystal oscillator (TCXO) measuring 2.5 x 2.0 mm with a height of only 0.8 mm maximum and weighing just 0.013 g. Exhibiting tight frequency stability of ±0.5 ppm over the broad operating temperature range of –30° to +85°C makes this oscillator ideal for GPS, PND and cellular phone handset applications. It is available in frequencies ranging from 13 to 38.4 MHz and GPS frequencies of 13, 16.368, 16.369, 16.8, 19.2, 24.5535, 26, 27.456 and 38.4 MHz. Delivery for the NT2520SA series is 12 weeks ARO. Price for 10,000 pieces of the NT2520SA packaged tape and reel is approximately $1.65 each.
NDK America Inc.
Booth 909 | RS 283
High Speed Receiver and Beam Controller
The Panther 9000 series high speed receiver is now available for high performance antenna testing. The Panther 9000 collects multi-port, multi-frequency data at up to 300,000 measurements per second and includes an integrated beam controller to free the measurement application software from stringent timing requirements. The Panther 9000 supports CW or pulsed measurements and transfers the amplitude and phase data directly to the host computer through a LAN interface.
Nearfield Systems Inc.
Booth 2012 | RS 284
GaN-on-Si Power Transistor
The model NPT1004 is a gallium nitride high electron mobility transistor (HEMT) that delivers 45 W at 28 V for high peak to average ratio (PAR) and pulsed applications. Designed using Nitronex’s patented SIGANTIC® NRF1 process, the NPT1004 combines a broadband DC to 4 GHz high power density GaN-on-Si HEMT with a cost-effective thermally-enhanced plastic package to offer an optimized solution for light thermal load power applications. The NPT1004 delivers 5 W average power for 2.5 to 3.5 GHz WiMAX applications (single carrier OFDM 64-QAM 3⁄4, 10.3 dB peak to average, 10 MHz channel bandwidth) and 4.5 W for 3.3 to 3.5 GHz WiMAX applications (single carrier OFDM 64-QAM 3⁄4, 10.3 dB peak to average, 3.5 MHz channel bandwidth).
Booth 2108 | RS 285
NXP’s TFF1003HN is a new RF IC designed for use in Ku-band linear block upconverter for VSAT systems. This IC features HVQFN24 packaging and is manufactured in SiGeC technology. The TFF1003HN is an integrated VCO-PLL, and converts a 204 MHz signal into a 13.05 GHz, phase noise, integrated from 5 kHz to 10 MHz, < 0.7° RMS. This model offers 100 kHz phase noise density at –100 dBc/Hz. The TFF1003HN will be volume production at the end of 2008.
San Jose, CA
Booth 523 | RS 286
Drop-in Circulators and Isolators
These two miniature sized drop-in type circulators and isolators are designed for the 33 GHz frequency range. Dimensions of the circulators/isolators are 4 x 4 x 3.5 mm. The pattern is printed on a ferrite plate by sputtering, and the connection to the circuit board is made by bonding wire or ribbon. Loss is 1 dB maximum, VSWR is 1.7 maximum, isolation is 15 dB minimum and power handling is 0.25 W maximum.
Orient Microwave Corp.
Higashiomi, Shiga, Japan +81-749-45-8121
Booth 1649 | RS 287
The model PTF-2BP30512-ES is a continuously tunable bandpass filter for JTRS and SDR RF front-end applications. This filter operates in a frequency range from 30 to 512 MHz and provides an easy-to-use, self-contained compact package that facilitates filter performance demonstrations and integration for RF front-end application testing. The 6 percent bandwidth filter has insertion loss of 5.5 dB, IIP3 of 43 dBm and can handle up to 2 W of RF power for use in Tx/Rx applications.
Paratek Microwave Inc.
Booth 2111 | RS 288
Rectangular GPS Antenna
This rectangular antenna (linear polarization) is designed to perfectly fit into a slim type of navigation application and GPS receiver. It has a square antenna merit that features low noise as well as a chip antenna with good antenna gain. This antenna is smaller, superior and also offered in a variety of sizes that include: 25x7.4x2T, 25x10x4T, 25x13x4T and 35x17x4T according to customers’ needs. The company is in progress of obtaining patents for Korea (10-20060100021-1) and overseas (PCT/KR2007/002291).
Partron Co. Ltd.
Hwaseong-si, Gyeonggi-do, Korea
Booth 2152 | RS 289
Portable Frequency Standard
This high precision frequency standard called 7370 is a cost effective and fully portable GPS synchronized frequency standard, which will continue to operate for up to eight hours without the connection of its GPS and power. The instrument is compact and lightweight (weighs only 2.6 kg), and has fully automatic battery recharging and oscillator calibration overnight, using optional fixed antenna, or while travelling (via in-car charger lead and magnetic base GPS antenna). The 7370 retains accurate time and frequency during long periods of field use, due to calibration via GPS and high quality internal oscillator.
Pendulum Instruments Inc.
Booth 344 | RS 290
Digital Step Attenuators
This new line of UltraCMOS™ 7-bit digital step attenuators feature an unprecedented serial-addressable control interface and best-in-class linearity, superior noise immunity and no gate lag. These 50 Ω DSAs have a frequency range up to 6 GHz, and offer superior attenuation accuracy, lower current drain and exceptional ESD. The attenuators work with any combination of 3 V and 5 V logic on supply and control pins, making them ideal for next-generation communication and ATE systems.
Peregrine Semiconductor Inc.
San Diego, CA
Booth 1606 | RS 291
These microwave frequency synthesizers are based on a phase-refining technology that provides a unique combination of low phase noise, fast switching speed and cost characteristics. The FSW-0210 model operates in a frequency range from 2 to 10 GHz with 0.001 Hz steps, microseconds tuning speed and instrument-grade spectral purity. A built-in processor supports SPI/RS-232/USB interfaces and features including output power calibration and control, external ALC input and various modulation options. The USB connection and customer-friendly interface enable instant deployment of the synthesizer.
Phase Matrix Inc.
San Jose, CA
Booth 450 | RS 292
The model RFE-218-70-BB is a direction finding receiver front-end that operates in a frequency range from 2 to 18 GHz. The minimum dynamic range of this subsystem is –60 to +5 dBm, while the input VSWR is 3.0 and the frequency flatness at the outputs is ±3 dB maximum. The Log slope is 50 mV/dB (±10 percent), the Log linearity is ±2.25 dB maximum and the TSS is –63 minimum. The rise time is 30 ns maximum and the recovery time is 350 ns maximum. The typical gain is +3 dB and the isolation between the outputs is 24 dB minimum.
Planar Monolithics Industries Inc.
Booth 912 | RS 293
X-band PA MMICs
Plextek has recently completed the design of 2 and 4 W X-band (8 to 12 GHz) power amplifier MMICs for a UK client. These are available as bare die, packaged components or connectorized modules. As fabrication also takes place outside the US, these parts will not be subject to ITAR restrictions.
Great Chesterford, Essex, UK
+44 (0) 1799 533200
Booth 2016 | RS 294
Precision “N” Cable Connector
This precision Type N connector is available for 0.300 diameter low-loss cables. Using solder/clamp cable termination with a soldered center contact the connector performs from DC to 18 GHz. The design has a dielectric loaded solid outer conductor that is compatible with all N female interfaces and has a robust internal captivation. Other unique features include a convenient knurl/hex coupling nut and an extended tail grip designed to retain SAE-AMS-DTL-23053/4 dual wall heat shrink in hi-flex applications. Additionally, the connector has moisture resistant front and rear seals and is thermally rated from –55° to +170°C.
Precision Connector Inc.
Booth 413 | RS 295
Linearized Pin Diode Attenuator
The model AAT-28-479A/5S is a linearized pin diode attenuator that supplies up to 32 dB of attenuation in the frequency range from 6 to 16 GHz with 4 dB insertion loss and a control voltage of 0 to +4 V. The DC power required is +15 V at 100 mA and –15 V at 50 mA. Outline dimensions are 2" x 2" x 0.8" and SMA female removable connectors are utilized. Other units are available to 18 GHz.
Pulsar Microwave Corp.
Booth 1548 | RS 296
This digitally-controlled exciter is a turnkey solution designed for FMCW radar applications. Using one master clock, the exciter provides the coherency of frequency and timing in RF output, radar synchronizer clock, receiver data acquisition sampling clock and trigger. The DDS-based exciter posses high linearity and low phase noise characteristics meeting extreme accuracy requirement in generating agile programmable waveforms such as saw-tooth, triangle and gated FMCW. The standard RF output frequency is set at 11.7 GHz with up to 1.2 GHz bandwidth. It is then multiplied into Ka-band, V-band and W-band to generate desired millimeter-wave frequencies.
QuinStar Technology Inc.
Booth 1905 | RS 297
RF Passive Components
R&D Microwaves introduces new low PIM RF passive components for wireless, featuring a new high power combiner. The unit includes a unique integrated high power termination. The combiner assembly operates in a frequency range from 800 to 2500 MHz, with less than 160 dBc PIM. The combiner is supplied with 7-16 DIN connectors and is IP-65 sealed for outdoor or indoor applications. “No PIM” has increasingly become a hot topic in wireless systems applications.
R&D Microwaves LLC
East Hanover, NJ
Booth 951 | RS 298
Reactel part number 4PR7-12274/1575.4-S11 is a dual GPS band notch filter with 45 dB notches centered at 1227.4 and 1575.4 MHz. This unit features 3 dB bandwidths of 15 MHz and insertion loss of less than 0.8 dB.
Booth 1722 | RS 311
GaN Ultra Broadband Power Amplifier
The model GA0538-4540-M amplifier is designed with wideband gap GaN device technology, resulting in ultra broadband frequency range and high output power. This product is 10 W output power over 0.5 to 3.8 GHz that features 42 dB gain. Current draw is 2500 mA from +32 V DC. Connectors are SMA(F). A bench top type model, GA0538-4540-R, is also available that features a cooling fan and 100 to 240 V AC.
R&K Co. Ltd., Seki Technotron USA
Santa Clara, CA
Booth 1712 | RS 299
The SPDT latching switch offers a height reduction of 40 percent over standard models. This sub-miniature latching switch maintains all of the electrical characteristics of its standard models. The switch operates in a frequency range from DC to 18 GHz, features low insertion loss and high isolation, high power handling capability and a life of 2,000,000 cycles minimum. Size: 1.25 x 1.34 x 0.5.
Renaissance Electronics Corp.
Booth 1800 | RS 312
RFMD’s SZP5026Z delivers the ideal combination of low cost and high performance. The SZP5026Z is a high-linearity, single-stage class AB heterojunction bipolar transistor (HBT) amplifier housed in a proprietary surface-mountable encapsulated package. Specifically designed as a flexible final PA for 802.16 and 802.11 equipment in the 4.9 to 5.9 GHz bands, the on-chip active bias circuitry allows operation from a single +3 to +5 V bias without the use of complicated negative gate bias circuitry.
San Jose, CA
Booth 1235/1311 | RS 313
Sangshin Elecom announces its line-up of RFID filters. Sangshin has developed a complete line of monoblock filters for RFID applications. These filters are designed for US, European, Japanese and Korean RFID applications and have the same package size and footprint for all four frequencies allowing for a single board layout. These filters offer excellent performance and stability in a small, cost-effective package.
Sanghin Elecom, RFMW Ltd.
San Jose, CA
Booth 651 | RS 314
The 2008 line card is designed for the company’s RF, wireless and power conversion division, which designs and distributes components, modules and assemblies used in RF and wireless infrastructure, networks, digital broadcasting, defense and power conversion. The dual-format line card features the most up-to-date listing of Richardson Electronics’ suppliers. Featuring 77 of the industry’s leading global suppliers, the new line card includes 11 new suppliers. Suppliers featured in the line card have access to key global customers as it will be distributed by local sales engineers at customer visits and tradeshows. The expanded line card will also help customers searching for products by category.
Booth 1626 | RS 315
This series of QPL single-pole, double-throw (SPDT) surface-mount switches are qualified to MIL-DTL-3928. The switches are identified as part numbers MIL-DTL-3928/ 29-01 through -12 on the QPL listing. This new line of SPDT surface-mount switches reflects the high quality and reliability of QPL switches, as well as other electro-mechanical switches manufactured by RLC.
RLC Electronics Inc.
Mount Kisco, NY
Booth 415 | RS 316
The new R&S ZVA50 is the world’s first four-port network analyzer with measurement coverage to 50 GHz. Its two sources allow it to perform measurements on multiport and balanced components using a single instrument. With a measurement bandwidth of 15 MHz, high sampling rates and time resolution of 12.5 ns, the R&S ZVA50 is well suited for pulse profile measurements of radar and satellite signals. Dynamic range is 130 dB, output power is +13 dBm and measurement speed is 3.5 μs/point.
Rohde & Schwarz
Booth 623 | RS 317
These two unique products improve productivity in test applications. The SMA Quick Lock™ provides a unique locking mechanism to replace threaded SMA male connections. The SMA Push-On™ offers a faster slide on connection. Both work with any SMA female connector. These products are offered as test cables in various sizes, cable types and configurations and provide excellent electrical performance to 18 GHz.
Rosenberger of North America LLC
Booth 1517 | RS 318
Quad-band CMOS PAs
The model SEM4001 is a GSM/GPRS quad-band CMOS PA module that meets the 3GPP standards. By using SEM’s module technology, SEM4001 achieves power-added efficiency levels that are among the highest in the GSM PA industry. SEM’s patented PA techniques allow the power amplifier core and the power controller to be implemented in a single die with a standard silicon CMOS process technology bringing the cost advantage of true CMOS integration. The integrated 50 Ω input and output matching circuitry in the standard 5x5 leadless plastic package enables customers to significantly minimize the bill of material. Samples are available upon request.
Samsung Electro-Mechanics (SEM)
Suwon, South Korea
Booth 1157 | RS 319
The 7/16 panel receptacle consistently delivers intermodulation levels of –175 dBc. This receptacle is especially suited for up-link communications. It ensures high grade transmission by delivering VSWR < 1.03 (PCS) and PIM of –175 dBc. It is weather sealed and is delivered with an enhanced 0.232 interface that results in improved mating characteristics and reduction of mating torque. In addition to improved on/off mating, the enhanced 0.232 interface also offers higher signal integrity and therefore protection of communications equipment.
Booth 1042 | RS 320
The SKY73117 voltage-controlled oscillator (VCO) synthesizer is a fully integrated, high performance signal source for high dynamic range transceivers. The device provides a fast switching speed and low phase noise performance for 2G, 2.5G and 3G base station transceivers. In addition, the synthesizer provides an integrated, internal shield for the complete module that reduces electromagnetic interference (EMI) and radio frequency interference (RFI). Therefore, external EMI/RFI shielding is not required, which reduces PCB layout and shortens product development time.
Skyworks Solutions Inc.
Booth 1617 | RS 321
End Launch Connectors
These enhanced end launch connectors provide an improved clamping mechanism that securely holds the connector in place for board thickness up to 0.110" (2.80 mm) and renders soldering the pin to your trace optional. Connectors are available in SMA (27 GHz), 2.92 mm (40 GHz) and 2.40 mm (50 GHz). Connectors ship fully assembled.
Southwest Microwave Inc.
Booth 2043 | RS 322
Nonmagnetic Variable Trimmer Capacitors
These high voltage nonmagnetic variable capacitors, designated the SGNM series, feature durable high purity ceramic dielectrics. High purity ceramics are a new concept to the industry and provide significant advantages over the currently available devices using polytetrafluoroethylene (PTFE) dielectric including increased performance, durability, mechanical and electrical stability. The design can be sealed to 40 lbf/in2 (276 kPa), or used for cryogenic applications as low as 4 K. The series is easily modified with specification options enabling the design to meet many unique project requirements. The SGNM series offers models with capacitance ranges starting with 1 to 10 pF, and increasing (in 5 pF increments) to 10 to 180 pF. DC working voltage ranges from 1.5 kV up to 7.5 kV (DC withstanding voltage from 3 to 15 kV).
Sprague-Goodman Electronics Inc.
Booth 1553 | RS 323
Ceramic Trimmer Capacitors
These ceramic trimmer capacitors are designed for telecom and microwave projects requiring miniature components. Designated the SGC3S series, these super thin surface mounted devices measure 0.126" x 0.177" x 0.059" and are RoHS compliant. They are constructed with high temperature liquid-crystal polymer housings for superior durability and low dielectric loss. The housing is constructed to resist penetration by dust and flux, and is colored to make each of the five available capacitance ranges easily identifiable. The parts are ideal for designs requiring minimal capacitance drift over the operating temperature range of –25° to 85°C.
Sprague-Goodman Electronics Inc.
Booth 1553 | RS 324
These hermetic miniature dual-lobed multi-pin connectors are offered with 0.025" contact centers. The connectors are mating interface compliant with MIL-DTL-32139. Designed to laser weld into higher level assemblies and provide reliable hermeticity (1x10–9 or better) in hostile environments. Connectors are available in several shell configurations and materials, including aluminum, stainless steel and titanium. They can be supplied with insulated wire, formed leads or flat pin terminations to facilitate wirebonding.
SRI Hermetics Inc.
Booth 1436 | RS 325
Copper-plated Submount Technology
This copper-plated submount technology is designed in support of today’s “P” side down, edge-emitting high power laser diode mounting applications. Submount features include: planarized copper metalization (up to 75 μm thick) capable of efficient, high thermal transfer unmatched by today’s other standard metallization techniques; high thermally conductive ceramics: AlN (up to 230 W/mK Tc), BeO (up to 320 W/mK min Tc); greatest thermal conductivity/price ratio amongst metallizations currently available; excellent flatness and parallelism; straight walls; and dead sharp radii (5 μm typ).
Stellar Industries Corp.
Booth 2001 | RS 326
To meet the requirements of customers looking to simplify system level interconnect, SV Microwave introduces a new family of high frequency contacts for series 1 and 3 MIL-DTL-38999 connectors. Based on SV’s proven blindmate technology to accommodate misalignment during mating, the product line consists of size 8 contacts with the option of 18 or 40 GHz performance and size 12 contacts operating to 65 GHz, all of which fit into standard cavities and are fully removable using standard extraction tools. Designs are available for common cable sizes: custom versions can be produced for special cables and PCB mount applications.
West Palm Beach, FL
Booth 801 | RS 327
This high performance, high resolution synthesizer operates in a frequency range from 5 to 5.3 GHz and is housed in a small connectorized package measuring 20 x 12 x 3 cm. The step size in the 300 MHz operating bandwidth is 1 Hz with maximum phase noise of –105 dBc/Hz at 1 kHz, –120 dBc/Hz at 10 kHz, –120 dBc/Hz at 100 kHz and –120 dBc/Hz at 1 MHz offset. Non-harmonic spurious suppression is –60 dB typical with RF output power of +10 dBm over the specified operating band. Additional features include support for locking with external GPS 1 PPS source for long-term stability and manual field adjustable frequency tuning.
Synergy Microwave Corp.
Booth 900 | RS 328
fastRise™27, a multilayer, non-reinforced prepreg material is designed to eliminate skew in differential transmission lines and eliminate Dk fluctuations caused by fiberglass in filter and coupler applications. fastRise27 is a low temperature thermosetting prepreg based on ceramic, thermoset and PTFE. It is ideal for use with Taconic’s standard low loss laminates like TSM-29. The low 0.0017 Df at 40 GHz enables the production of mm-wave multilayer PWBs. The low 420°F lamination temperature enables sequential laminations to be performed at lower temperatures than those normally used for FEP and PFA in military constructions.
Booth 637 | RS 329
4 kW IFF Pulsed Amplifier/Transmitter
The model 1172 is a pulsed amplifier/transmitter designed primarily for IFF applications. Maximum output power is 4000 W (66 dBm) and is adjustable in three increments. The unit operates in IFF Modes 1, 2, 3/A and 4 and Mode S. Optionally, the model 1172 is available as a transmitter with the addition of an internal RF source. Standard features of the amplifier include DPSK and PPM modulation, pulse shaping circuits, sample ports (forward power) and protection circuitry.
Technical Services Laboratory Inc.
Ft. Walton Beach, FL
Booth 515 | RS 330
DPDT Ultraminiature Relays
This series of DPDT ultraminiature relays delivers RF performance over a bandwidth from DC to 8 GHz. The new RF312 exhibits high repeatability and is capable of transmitting signal integrity up to 12 Gbps data rates. The RF312 family of relays also exhibits excellent isolation between pole-to-pole. The new relays are available as through-hole (RF312) or surface-mount (GRF312). Both versions are RoHS compliant.
Booth 823 | RS 331
Intelligent Automatic Filter Tuning Tool
This Intelligent Automatic Filter Tuning Tool (IAFTT) allows producers of high performance RF and microwave filters to save a significant amount of time and money, due to its capability to set adequate filter characteristics automatically, up to several times faster and more accurately than manually. IAFTT makes filters and duplexers production planning easier. Production processes are much more foreseeable and there is no need of high experienced human filter tuners.
TeleMobile Electronics Ltd.
+48 58 7351186
Booth 2115 | RS 332
HDRFI® assemblies use high frequency low loss coax and a unique patented interconnect system to transfer high frequency/ data through a planar connection system, using a z-axis elastomer. High frequencies transfer with minimal loss through the connector interface. Features include: standard pin and socket power contacts, no moving parts, 40 GHz RF contacts, frictionless, high bandwidth, low compression mating force, small form factor, zero extraction force, scalable and customizable for multiple configurations.
St. Augustine, FL
Booth 1637 | RS 333
This wide range of millimeter-wave components is designed to support various military and commercial/industrial applications. These components are the basis for custom millimeter-wave subsystems for radar, sensor and communications applications. System tradeoff studies are performed in cooperation with the customer to achieve optimum performance levels. Fast prototyping can then be performed using standard Terabeam/HXI components. A transition to production can take place using advanced integration techniques to reduce the size and cost of the hardware.
Terabeam/HXI, a Division of Terabeam Corp.
Booth 403 | RS 334
SiO2 cable assemblies are a major advancement in silicon dioxide technology. Advanced equipment and materials result in a low loss, high velocity dielectric with excellent phase and loss versus temperature as well as excellent consistency. SiO2 cables have exceptionally low hysteresis, with phase and loss values returning to the same values. Hermetically sealed intermediate sections allow use of virtually all TMS connectors including replaceable and non-replaceable and connectors have a crack-free, fired glass seal for optimum microwave performance.
Times Microwave Systems
Booth 1000 | RS 335
Ku-band GaN FET
The model TGI1414-50L is a gallium nitride (GaN) Ku-band power field effect transistor (FET) that operates in a frequency range from 14 to 14.5 GHz and achieves high output power of 50 W. The primary application of the new transistor will be earth stations for satellite microwave communications, which carry high capacity signals, including high definition broadcasts. The TGI1414-50L is now in mass production.
Toshiba America Electronic Components Inc.
Booth 1701 | RS 336
Solid-state Programmable Attenuator
The model SPA-53095-1S-5V-TTL-R is a high performance programmable attenuator that features a dynamic range of 95 dB in 1 dB steps over a wide frequency range of 400 to 3000 MHz. Attenuation accuracy is ±0.4 dB or 2.5 percent over the entire range. VSWR is 1.5 maximum and insertion loss is 5.5 dB maximum. Switching speed is < 100 ns and the operating temperature range is 0° to 70°C. The control protocol is TTL and via a 10 pin connector. The RF connectors are SMA female. This programmable attenuator is an ideal solution where high reliability, fast switching speed and flexible configurations are required. Delivery: stock to six weeks.
Booth 1836 | RS 337
These new SMPM microminiature RF connectors offer the same performance and convenience as the proven SMP connectors, but in a form factor that is 30 percent smaller. With a low VSWR through 40 GHz, SMPM connectors offer a versatile solution for high density packaging, allowing center-to-center spacing of 0.135". The 50 Ω connectors are available with either a smooth bore or fully detented interface to provide insertion forces of either 2.5 or 4.5 pounds. The interface design complies with MIL-STD-348A. The connectors are designed for rugged environments, where harsh mechanical shock and vibrations are found.
Tyco Electronics Corp.
Booth 1723 | RS 338
UltraCapacitor™ employs the same technology used in UltraBridge. By employing the silicon nitride as the dielectric layer between the upper and lower electrodes, UltraSource is capable of integrating capacitor elements from 2 pF to 250 pF directly into thin film circuit designs. Spaces as small as 1 mil (25.4 microns), controlled to tolerances of 2.5 microns, can be achieved. With capacitance designed in, the door is open to a variety of other component integration ideas.
Booth 1900 | RS 352
The VFJA402 and VFJA430 jitter attenuators, integrated clock/PLL timing solutions are designed for 1G/ 10G/100G synchronous Ethernet applications. The VFJA402 provides two LVPECL outputs from 10 to 200 MHz. The VFJA430 has two LVCMOS outputs from 10 to 200 MHz. Two select inputs [S1,S0] allow the user to select 1 of 3 preset input frequencies from 8 kHz to 200 MHz or free-run mode for both jitter attenuators. The VFJA402 and VFJA430 offer ultra-low output jitter (0.20 ps RMS 12 kHz to 20 MHz). The devices operate from a +3.3 V DC power supply and typically consume 150 mW. Both are available in a 19.5 x 15.5 mm surface-mount package and are RoHS 6/6 compliant.
Valpey Fisher Corp.
Booth 1449 | RS 339
Oven-controlled Crystal Oscillators
The EX-620 series evacuated miniature oven-controlled crystal oscillator (EMXO) was specifically developed to achieve OCXO performance while significantly lowering power consumption and reducing package size (13.21 x 13.21 mm). The smaller size and low power consumption makes the EMXO ideal for portable and battery powered applications. The ruggedized hybrid thick film construction also makes the EX-620 ideal for harsh environment applications.
Booth 1501 | RS 340
SWAP-X402 is an innovative yet affordable tool for characterizing microwave power transistors. SWAP-X402 can be used as an add-on to any tuner system. Next to providing load pull information such as power gain, the SWAP-X402 measures the time domain waveforms of voltages and currents at the transistor terminals under realistic operating conditions. The additional time domain data result in an unprecedented insight in transistor behavior and are needed for validating large signal models, designing amplifiers and studying reliability.
+33 5 55 86 73 01
Booth 851 | RS 341
Silicon NPN Phototransistors
These wide-angle phototransistors in a PLCC-2 surface-mount package are compatible with lead (Pb)-free soldering. Devices in the VEMT series serve as pin-to-pin and functional equivalents for the current TEMT series of phototransistors, enabling simple and quick migration to meet lead (Pb)-free soldering requirements. Vishay’s current TEMT series of phototransistors are lead (Pb)-free PLCC-2 devices, but they require lead (Pb)-based solder. The new VEMT series of phototransistors feature the same specifications as the TEMT series devices, but are compatible with lead (Pb)-free reflow soldering processes according to JEDEC-STD-020D.
Vishay Intertechnology Inc.
Booth 1013 | RS 342
60 GHz Integrated Radio Solution
This 60 GHz integrated radio solution enables commercial, government and academic institutions to utilize the unlicensed 57 to 64 GHz band for application development. Vubiq’s tiny radio modules (patent pending), packaged in a 10 mm BGA, combine 60 GHz transmitters and receivers with integrated antennas, and are available in a cost-effective development system. Vubiq’s development system includes a 60 GHz transmitter board and 60 GHz receiver board, each with a USB controller. Embedded control firmware and a simple GUI interface are included, easing setup and operation.
Aliso Viejo, CA
Booth 311 | RS 343
The phase-locked oscillator (PLO) series provides a variety of input and output options, ensuring optimal phase noise during locked and unlocked conditions. The PLO series is based on low noise SC-cut crystal oscillator, phase lock loop and also includes an internal frequency doubler option. Noise floors are typically –172 dBc/Hz, and inputs can be specified from 1 to 30 MHz. These parts are useful for system synchronization, radar systems, coherent sources, phase noise cleanup and test equipment.
Wenzel Associates Inc.
Booth 2139 | RS 344
3D Electromagnetic Solver
WIPL-D Pro is a 3D electromagnetic solver that provides fast and accurate analysis of arbitrary metallic and dielectric/magnetic structures. Method of Moments based numerical engine offers efficient simulations and yield high precision results: current distribution, near field, far field and circuit parameters. Application areas include: 3D antennas/arrays, transmission lines/waveguides, multi-layered MW circuits, 3D scatterers and EMC problems.
+381 11 2124 656
Booth 853 | RS 345
Continuing the proud tradition of Omni Spectra, XMA Corp. announces two new high performance 40 GHz products: the Omni Spectra 4801-6XXX-XX family of coaxial terminations and the Omni Spectra 4882-6XXX-DB family of coaxial fixed attenuators. These products offer superior specifications, including low VSWR, a 1 W power rating, and a durable stainless steel construction–competitively priced and designed to meet the toughest demands of military, aerospace and communications applications.
Booth 218 | RS 346
Miniature Variable Attenuator
This miniature variable attenuator provides attenuation that can be varied continuously or by step and a wide frequency range from DC to 3, 6 and 10 GHz is available. Attenuation range from 3 to 60 dB is available. These attenuators are available in SMD, SMA/N connector types, feature small size and are lightweight. US utility patent. Applications include: 2.4G RFID, wireless LAN, mobile communications, GPS and satellite communications.
Shenzhen, Guangdong, China
Booth 745 | RS 347
The model CLV2593A-LF is a lead-free, RoHS compliant oscillator in S-band (2496 to 2690 MHz) featuring ultra low phase noise performance of –105 dBc/Hz at 10 kHz offset. This unique design offers superior harmonic suppression of –24 dBc and a typical tuning sensitivity of 20 MHz/V. This VCO is designed to operate at 8 V DC supply while drawing 22 mA (typical) over the extended operating temperature range of –40° to 85°C. CLV2593A-LF is ideally suited for applications that require good harmonic suppression and ultra low phase. CLV2593A-LF comes in an industry-standard mini package measuring 0.50" x 0.50" x 0.13". Delivery: stock to four weeks.
San Diego, CA
Booth 1908 | RS 348
EM Design Tools
Zeland offers high performance EM design tools for MMIC, RFIC, RFID, antennas, signal integrity, RF MEMS, SoP, SiP and other high frequency applications. The latest IE3D 14 features integrated layout editing, full-wave EM simulation and optimization, S-parameters, current, near and far field visualization and processing, accurate full-wave EM simulation from 1 Hz to 10 THz. IE3D also features real-time full-wave EM tuning and optimization, Boolean enabled object oriented layout parameterizations. IE3D is linked to Cadence layout tools and Microwave Office.
Zeland Software Inc.
Booth 1622 | RS 349