Low Noise Amplifier: PE2-1020-R518-15-SFF

PE2-1020-R518-15-SFF Rev  BPMI Model No. PE2-1020-R518-12-SFF is a low noise amplifier that offers a positive gain slope versus frequency. This type of amplifier is useful when trying to equalize frequency flatness over a broad bandwidth. This model provides 10 dB of gain at 500 MHz and 20 dB of gain at 18 GHz.

The noise figure is 10 dB at 500 MHz and 9 dB at 18 GHz. The OP 1dB is +14 dBm minimum and the maximum VSWR is 2.5:1. The operating voltage is +15 VDC and the current draw is 140 mA typical.

This model is supplied in PMI's standard PE2 housing.

Specifications:

Frequency Range

500MHz to 18GHz

Gain

10dB typical @ 500MHz and positive gain slope to 20dB typical @ 18GHz

Noise Figure

No Specified, but 10dB typical at 500MHz and 9dB typical at 18GHz

OP1dB

14dBm min.

VSWR In/Out

2.5:1 max.

DC Voltage Supply

+15VDC

DC Current Draw

140mA typ., 350mA max.

Connectors

SMA - Female

Housing

PE2

Finish

Gold Plated

Environmental Ratings:

Temperature:

 -54ºC to +95ºC Operating

 -65ºC to +125 ºC Non-Operating

 Humidity:

 MIL-STD-202F, Method 103B Cond. B

 Shock:

 MIL-STD-202F, Method 213B Cond. B

 Vibration:

 MIL-STD-202F, Method 204D Cond. B

 Altitude:

 MIL-STD-202F, Method 105C Cond. B

 Temperature Cycle:

 MIL-STD-202F, Method 107D Cond. A

Other gain levels and frequency ranges are available.

Logo

Post a comment to this article