Products

RSS

CST STUDIO SUITE 2018 builds on industry-leading CST electromagnetic simulation technology with a range of new features increasing the versatility of CST STUDIO SUITE.

The MRFCP0015 coupler is designed for applications that require very small, low cost, and highly reliable surface mount components. Applications may be found in broadband, wireless and other communications systems. These units are built Lead-Free and RoHS  compliant and feature welded wire construction for increased reliability.

This free version of the market leading electromagnetic simulation tool is developed as part of the CST® educational program to support learning, teaching and research at academic institutions. CST STUDIO SUITE Student Edition contains the versatile high-frequency time domain and frequency domain solvers as well as the static and thermal solvers.

Model SBL-1141741860-0606-V1 is a D band low noise amplifier with a typical small signal gain of 18 dB and a nominal noise figure of 6.0 dB across the frequency range of 110 to 170 GHz.  The DC power requirement for the amplifier is +3 V_DC/60 mA. The input and output port configuration offers an inline structure with WR-06 waveguides and UG-387/U-M flanges.

PMI Model No. BPF-11D825D-1D85G-60DB-SFF is a band pass filter centered at 11.825 GHz. The 1 dB bandwidth is 1850 MHz. Insertion loss 3 dB maximum, rejection -60 dBc minimum at 9.15 to 9.9 GHz and -60 dBc minimum at 13.75 to 14.5 GHz and VSWR 2.0:1. 

PMI Model No. P7T-2G18G-60-T-1W is a single pole, seven throw absorptive switch with phase and amplitude matching of ±6° and ±0.5 dB respectively, relative to J2. This model has also been designed to operate over the 2.0 to 8.0 GHz, frequency range with low in-band video leakage of -65 dBm.   

Model STE-SF612-15-S1 is a high ouput power E-Band X6 frequency extender that uses an input frequency range of 10 to 15 GHz at +5 dBm along with harmonic generation and filtering to produce a 60 to 90 GHz RF signal at +15 dBm. The extender is designed and manufactured as a bench top unit to extend the low frequency synthesizer or sweeper without losing all of the functionalities and features.

Model SBP-5037032518-1515-E1 is a power amplifier with a typical small signal gain of 25 dB and a nominal P_1dB of +18 dBm across the frequency range of 50 to 70 GHz.  The DC power requirement for the amplifier is +8 V_DC/650 mA.  The mechanical configuration offers an in line structure with WR-15 waveguides and UG-385/U flanges. 

Model SAC-0432433012-SF-S4-DP-QR is a quad ridge dual polarized conical horn antenna that operates from 4 to 24 GHz. The antenna offers a 12 dBi nominal gain, a typical half power beamwidth of 40 degrees on the E plane and 30 degrees on the H plane at the center frequency of 14 GHz. The nominal side lobe levels are -12 dB or lower. The horn antenna is equipped with SMA(F) connectors.