Products

Low Noise Amplifier for IoT: SKY67159-396LF

SKY67159-396FRFMW Ltd. announces design and sales support for the SKY67159-396LF, a 200 to 3800 MHz LNA designed for applications including IoT, small cell infrastructure, tower mounted amplifiers and remote radio units. The SKY67159-396LF’s thermal characteristics allow in-system performance up to +105 degrees C. Broadband performance is achieved with a single matching circuit providing superior gain flatness, low noise figure (<1 dB) and good linearity (31 dBm OIP3).


Read More

Mobile-Friendly Version of Pasternack.com

Mobile-Website-SQPasternack has just launched its new mobile website which marries powerful parametric search capabilities with a sleek, simplified and user-friendly interface that is specifically intended for smart phones and tablets. Pasternack’s main objective with the new mobile site was to provide engineers in the field the easiest, most intuitive process for searching and finding any of the company’s +40,000 RF components and cable assemblies.


Read More

DOCSIS 3.1 Compliant CATV Diplex Filters

DOCSIS 3.1 Compliant CATV Diplex FiltersM/A-COM announced three new families of diplex filters designed for DOCSIS 3.0 and DOCSIS 3.1 infrastructure equipment. Available in plug-and-play vertical and horizontal form factors along with surface mount configurations, MACOM's new high-performance diplex filters are ideally suited for use in CATV infrastructure spanning nodes, system amplifiers, line extenders, drop amplifiers and RFoG ONUs.


Read More

Intelligent RF Signal Generator

Aaronia-GeneratorRemote controllable via USB or stand-alone (internal battery) batch program operation. Aaronia’s new BPSG RF-Generator series offers up to +18 dBm, 65 dB dynamic range and internal TCXO (or external reference). It fits to every Aaronia antenna to get an active field-strength generator. Intelligent batch programs (sweep, ramp, modulation, frequency lists etc.) start automatically after every power on.


Read More

Energy Monitoring Hot Swap Controller: LTC4282

LTC4282Linear Technology Corp. introduces the LTC4282, an energy monitoring hot swap controller with dual MOSFET drive to enable 100 A and higher current board designs. The LTC4282 ensures safe board insertion and removal from live 2.9 to 33 V backplanes by controlling external N-channel MOSFETs to gently power up capacitors, avoiding sparks, connector damage and system glitches. High current hot-pluggable boards utilize parallel MOSFETs to reduce voltage drop.


Read More

Ultra-Broadband Low-Noise Amplifier: SKY67159-396LF

SKY67159-396LFSkyworks introduces an ultra-broadband low-noise amplifier (LNA) with superior gain flatness and exceptional linearity.The SKY67159-396LF single stage GaAs pHEMT LNA offers ultra-broadband performance with a single matching circuit, low noise figure and good linearity. On-die active bias design ensures consistent performance over process and temperature variation. The device allows high performance operation at temperatures up to +105 °C.


Read More

Single-Pole, Double-Throw Switch: SKYA2001

SKYA21001Skyworks introduces a single-pole, double-throw (SPDT) switch that is qualified to the Automotive Electronics Council (AEC) Q100 standard. The SKYA2001 features low insertion loss (0.4 dB at 2.4 GHz) and positive voltage operation with very low DC power consumption (10 µA). Its AEC-Q100 qualification supports extended production life requirements. The device is manufactured in an ultraminiature 2.00 x 1.25 mm, 6-pin SC-70 package.


Read More

Broadband Capacitors: 0402BB104

0402BB104Passive Plus Inc. is now offering our 0402BB104 broadband capacitors in both 25- and 50-volt (WVDC) versions.  While the 25-volt version typically operates to 35 GHz with an insertion loss < 1.2 dB, the 50-volt version’s operating frequency range has been extended to 50 GHz, with a typical maximum insertion loss < 1.2 dB. These capacitors are intended primarily for coupling RF signals or, occasionally, for bypassing them to ground, while blocking DC. 


Read More

50 GHz Attenuators: 8582-6150-xx Series

50GHz AttenuatorsRFMW Ltd. announces design and sales support for XMA Corp’s 8582-6150-xx series of 2.4 mm, 50 GHz Attenuators.  The XMA coaxial attenuators are available in standard dB values of 3, 6, 10, 20 and 30 dB and handle up to 1 W of power. Frequency DC - 50 GHz, VSWR ranges 0 to 26.5 GHZ to 40 to 60 GHz and operating temps are -55 to +100. The 50 GHz attenuators are in stock at RFMW and are ready to ship the same day.


Read More

Dual Differential SPDT Switch: PE42920

PE42920

RFMW Ltd. announces design and sales support for Peregrine Semiconductor’s PE42920 dual differential SPDT switch operating from 10 kHz to 6 GHz. The PE42920 targets test and measurement applications where two independent differential signals are required to be switched. Having both switches in a small, 3 x 3 mm QFN package saves both board space and BOM cost as well as improving performance.


Read More