We use cookies to provide you with a better experience. By continuing to browse the site you are agreeing to our use of cookies in accordance with our Privacy Policy.
PMI Model No. P2T-1G1R1G-25-R-SFF-100W-SM is a single pole, two throw, hermetically sealed reflective switch designed to operate over the 1.0 to 1.1 GHz frequency range. This model is designed to handle 100 Watts average input power and 5 kW peak having a 17 µs pulse width and 2% duty cycle. Features include TNC female connectors. Unit size is 3.25" x 2.75" x 0.70".
PMI Model No: P1T-DC40G-65-T-292FF-1NS-OPT18G-50OHM is a SPST Absorptive, FET switch that operates from DC to 18.0 GHz. The typical Isolation is 60 dB with an Insertion Loss of 4.5 dB typical and a 6 ns Switching Speed (On/Off) and a 2 ns Rise/Fall. SMA female connectors (J1 - J2) and SMC control connector. The size is 1.30" X 1.20" X 0.50".
PMI Model No. P2T-6G18G-40-R-570-TFF-1D6KW is a reflective 1.6 kilowatt high-power cold switching single pole double throw switch operating in the 6.0 to18.0 GHz frequency range. Features include TNC female connectors. Unit size is 2.00" x 2.00" x 0.75" with painted blue finish.
PMI Model No.P2T-1G18G-10-R-528-SFF-HIP10W is a single pole, two throw, reflective switch capable of operating with an input power of 10 W CW over the 1.0 to 18.0 GHz frequency range. This model features high input power handling capability while offering very fast switching speeds of 40 ns. This switch is compact in size and weight and only consumes 2.5 mA of positive and 2.5 mA of negative DC current making it suitable for a wide range of applications. Features include SMA female connectors, and TTL - Single Line. Unit size is 1.2" x 1.0" x 0.5".
PMI Model No. P2T-50M40G-95-T-515-SFF-OPT18G is an absorptive, single pole, two throw, pin diode switch that operates over the 50 MHz to 18 GHz frequency range. This model incorporates a TTL compatible driver for easy system integration. Features include SMA female connectors. Unit size is 1.25" x 1.25" x 0.4" with painted blue finish.
PMI Model No. PIA-12D8G-CD-1 is a Phase Locked, Dielectric Resonator Oscillator with Internal Reference having an output frequency of 12.8 GHz. This model provides a minimum output of +13 dBm with all spurs held to -80dBc and harmonics held to -25 dBc. The frequency stability is ±3 ppm with an internal reference of 100MHz. The phase noise is as follows: -34 dBc/Hz at 1 Hz, -65 dBc/Hz at 10 Hz, -85 dBc at 100 Hz, -10 8dBc/Hz at 1 kHz, -115 dBc/Hz at 10 kHz, -12 0dBc/Hz at 100 kHz, and -140 dBc/Hz at 1 MHz offsets.
MACOM has added three PIN diode switches to its AlGaAs family. Utilizing its AlGaAs technology to meet these demanding challenges, MACOM has designed the MASW-011094, a Ka-Band high power terminated SPDT PIN diode switch, MASW-011029, a wideband SP3T PIN diode switch and the MASW-011087, a Ka-Band SP4T PIN diode switch.
Pasternack has released six new IQ mixer models with RF and LO frequency bands ranging from 4 GHz to 38 GHz and In-Phase and Quadrature IF bandwidths ranging from DC to 4.5 GHz.
RFMW Ltd. announces design and sales support for a front-end module (FEM) designed for GPS and GLONASS applications. TST’s TN0081A contains a high performance pre-SAW filter, low noise amplifier (LNA) and post-SAW filter providing 18.5 dB of in-band gain and very high out-of-band rejection of unwanted signals. Relative to the center frequency of 1575 MHz, rejection is 85 dBc from 704 to 915 MHz and 75 dBc from 1710 to 1980 MHz.
RFMW Ltd. announces a pair of Peregrine Semiconductor, high frequency, SOI switches. The PE42525 and PE426525 are SPDT switches operating from 9 KHz to 60 GHz. Both switches offer fast, 8 nS switching time and high input linearity of 48 dBm IIP3. The PE42525 finds applications in test & measurement, microwave backhaul and communications systems and the PE426525 is targeted towards harsh industrial applications.
RSS
RFMW Ltd. announces design and sales support for a front-end module (FEM) designed for GPS and GLONASS applications. TST’s TN0081A contains a high performance pre-SAW filter, low noise amplifier (LNA) and post-SAW filter providing 18.5 dB of in-band gain and very high out-of-band rejection of unwanted signals. Relative to the center frequency of 1575 MHz, rejection is 85 dBc from 704 to 915 MHz and 75 dBc from 1710 to 1980 MHz.