Passive Components

RSS

Model SAT-603-14115-S1 is a V Band compact Orthomode Transducer (OMT) that operates at 61.5 GHz with 5 GHz operation bandwidth. This OMT exhibits 0.5 dB insertion loss, and 20 dB return loss. It also offers greater than 30 dB port to port isolation and cross polarization over the entire operating frequency band.

Model STZ-10-I1 is a W Band full waveguide noise source. The noise source is silicon IMPATT diode based solid state noise source, which employs high performance diode and priority circuit design to offer nominal 12 dB ENR with extreme flatness in entire waveguide bandwidth from 75 to 110 GHz.

Model SWX-40360320-19-4B is a four port, 20 dB U-band full waveguide band crossguide coupler. Unlike most commercial available narrow band couplers, the new crossguide coupler covers full U band waveguide operation. The crossguide coupler exhibits less than 0.5 dB insertion loss, greater than 20 dB return loss, +/- 1 dB coupling flatness and better than 15 dB directivity over the entire 40 to 60 GHz frequency band.

Model SFD-753114-10SF-N1 is a GaAs Schottky beamlead diode based W band waveguide detector with negative output voltage polarity. The detector has 800mV/mW small signal detection sensitivity and +/-2.0 dB flatness in the entire 75 to 110 GHz operation frequency bandwidth.

The AM10000DC881 directional coupler operates over a broad frequency range of 2 to 18 GHz, making it an excellent choice for electronic warfare, test and measurement, and many other applications. It has coupling of 30 dB +/-1.4 dB, insertion loss of less than 0.5 dB, directivity of at least 12 dB, sensitivity of +/-1 dB, and power handling ability of 400 W average and 3 kW peak.

The AD900-1800-2700TR296 is a high-performance cavity triplexer designed for wireless applications in three standard wireless bands. It has rejection greater than 100 dB, power handling of 300 W, insertion loss of 0.35 dB, and return loss of 18 dB, measures only 237 x 131.6 x 55 mm, and uses Type-N female connectors.

The AE215H9780 LC high-pass filter has a cutoff frequency of 215 MHz and a pass band of 215 to 1000 MHz, making it well suited for a wide range of applications. It has insertion loss of less than 1 dB, rejection greater than 60 dB from DC to 100 MHz, uses SMA female connectors, and measures 2.5 X 1.1 X 0.75 in.

Renaissance has developed a new solid state programmable attenuator that can be used to perform fading simulations. The device operates from DC – 3 GHz with 5.5 dB insertion loss and can attenuate 90 dB in 0.5 dB steps. The attenuator can handle 20 dBm over -40 to +85 C.

Skyworks Solutions, Inc. unveils a new device for cellular infrastructure, VHF/UHF military and public safety radios. The SKY12408-321LF is a 50 to 600 MHz, 6 dB differential attenuator that is pin-for-pin compatible with its 12 dB SKY12407-321LF attenuator, but ideal for IF radio applications requiring lower overall attenuation and gain control.

M/A-COM Technology Solutions Inc. (“MACOM”), a leading supplier of high performance RF, microwave, and millimeter wave products, today announced a new SPDT Switch-Limiter that is ideally suited for S-Band military and commercial radar systems. The MASL-011023 is an innovative switch-limiter solution for customers who require the industry’s fastest recovery time and highest power handling for S-Band receive protection applications.