The 948D Seriesuses a fused, segmented metallization pattern, offering greater open circuit protection, increased reliability, and superior control of capacitance loss than competitive types. The new capacitors are ideally-suited for DC link applications where high bus voltage, high capacitance, and high ripple current are required.
RSS
The AM5725B1162ceramic bandpass filter has a center frequency of 5725 MHz, a 1-dB bandwidth of 90 MHz (5680 to 5770 MHz), insertion loss of 5 dB or less, passband ripple of 1.2 dB or less, return loss of at least 12 dB, and rejection of at least 30 dB at 5525 MHz and 5925 MHz.
RFMW, Ltd. announces design and sales support for TriQuint Semiconductor 885033, a 2.4 GHz wireless LAN / Bluetooth and LTE coexistence filter. The 885033 features high rejection in B38/40 bands. Performance is rated over a large temperature range (-30 to +85 degrees C) and the TriQuint 885033 is housed in an industry leading 1.4 x 1.2 x 0.46 mm miniature package.
Renaissance has released a new S-band 2.5 kW peak power drop-in circulator operating from 2.9 to 3.3 GHz. With insertion loss of less than 0.6 dB and with return loss and isolation over 19 dB, the circulator is ideal to duplex an antenna with HPA and a receiver.
Renaissance has designed a 12 x 12 programmable delay line (PDL) matrix that can be used to simulate targets for phased array radar and receiver optimization. Each of the 12 inputs is connected to dividers, programmable attenuators and a programmable delay line matrix. The amplitude and phase are controlled by custom software with custom defines UDP protocols.
Richardson RFPD, Inc. announces immediate availability and full design support capabilities for a new family of circulators and isolatorsfrom Skyworks Solutions, Inc. (Skyworks). The new devices offer high isolation and low insertion loss, cover a broad frequency range (791 to 2710 MHz), and are available in ultra-miniature packages-as small as 11 and 15 mm, without sacrificing performance.
Newly released from AtlanTecRF is a range of Wide Band Coaxial Isolators operating in the VHF and UHF frequency ranges and designated the LFI series. Offering up to an octave of band width at frequencies as low as 100 MHz, this range of products in 50 ohm impedance represents a first in solutions for both the RF design engineer and the RF test engineer.
PMI Model No. LM-10G-3-26DBM-12V is an active limiter that operates at 10 GHz and provides an input dynamic range of -45 to +26 dBm. This limiter offers very hard limiting at 0 dBm typically and 3 dBm maximum. The VSWR on average is better than 1.4:1 and operating voltage is +12 to +15 VDC with a current draw of 10 0mA.
Breaking barriers in the microwave system and test world, the new and innovative BPI series of power dividers feature a previously unattainable isolation between channels in excess of 40 dB. This is achieved by the use of ferrite isolators in each output port, a design enhancement which brings with it low VSWR of less than 1.25:1, and reverse isolation of greater than 20 dB, a hitherto unavailable asset.