RFMW Ltd. announces design and sales support for a unique low noise amplifier/gain block. TriQuint’s TQL9044 offers market leading 0.6 dB noise figure from 1.5 to 4 GHz. Integrated bypass modes allow circuit designers the ability to control both LNA shutdown and internal bypass switching. Three modes are available: LNA off, bypass off; bypass on, LNA off; bypass off, LNA on.
RSS
Linear Technology announces the LTC6091 and LTC6090-5, additions to the LTC6090 family of precision operational amplifiers which operate on a supply voltage up to 140 V (±70 V). The dual LTC6091 features separate output disable pins, making it useful in high voltage multiplexed applications. The decompensated single LTC6090-5 amplifier offers higher speed and is stable at a gain of 5 or above.
AR Modular RF has completed production on the KAW5050. It is a Class AB wideband RF power amplifier system delivering up to 1000 W PEP power into a 50 ohm load over the frequency range of 225 to 400 MHz. This custom system comprises a power amplifier, controller subsystem and AC power supply unit encased in a 3 RU shelf. The amplifier is being used in a base station application and can be operated and monitored remotely via RS232 or Ethernet control.
Richardson RFPD Inc. announced the availability and full design support capabilities for two new gallium nitride on silicon carbide (GaN on Sic) from TriQuint. The TGA2216-SM is a wideband cascode amplifier that offers exceptional wideband performance and also supports 40 V operation and the TGA2237-SM is a wideband distributed amplifier that operates from 0.03 to 2.5 GHz.
PMI Model No. PE2-34-2G18G-3R5-15-SFF-VVG-DD is a voltage variable gain amplifier with integrated diode detector operating over the frequency range of 2.0 to 18.0 GHz. This amplifier is supplied in our standard PE2 housing that can be used as SMA connectorized or as a surface mount component. It is optimized for 5.5 to 18.0 GHz. 
PMI Model No. PE2-30-2R04R0-1R5-21-12-SFF is a 2.0 to 4.0 GHz, low noise amplifier that typically provides 30 dB of gain while maintaining a maximum gain flatness of +/-1.0 dB over the operating frequency. The typical noise figure is 1.5 dB and offers a minimum OP1 dB of +21 dBm. The amplifier requires +12 to +15 VDC and has a nominal current draw of 300 mA.
PMI Model No. PE2-30-2R04R0-1R5-21-8V-SFF is a 2.0 to 4.0 GHz, low noise amplifier that typically provides 30 dB of gain while maintaining a maximum gain flatness of +/-1.0 dB over the operating frequency. The typical noise figure is 1.5 dB and offers a minimum OP1 dB of +21 dBm. The amplifier requires +8 VDC and has a nominal current draw of 300 mA.
M/A-COM Technology Solutions announced an integrated two stage differential amplifier for DOCSIS 3.0 and 3.1 reverse path infrastructure equipment. The MAAM-011186 is designed for customers who require a highly linear variable gain amplifier (VGA) solution for network access equipment and head-ends in the hybrid fiber coax (HFC) system. This device offers 39 dB of gain and 3 dB of noise figure with 31.5 dB attenuation range.
RFMW Ltd. announces design and sales support forTriQuint's TGA2216-SM GaN, cascode amplifier operating from 0.1 to 3 GHz. The cascode configuration offers exceptional wideband performance as well as supporting 40 V operation. The TGA2216-SM is ideally suited to support both radar and communication applications across defense and commercial markets as well as electronic warfare.
From signal amplification to filtering to mixing, SenarioTek is a recognized leader in solving even the most complex RF and microwave problems. Our engineers work closely with your team to review specifications and determine how to best deliver signals in the right form to the right place.