Skyworks introduces a 0.5 to 4.0 GHz low-noise amplifier with an active bias, offering excellent return loss, low noise, and high linearity performance for applications including high performance wireless infrastructure, L and S band military radio, SDAR, DBS set-top box, and GPS. The SKY67103-396LF features internal active bias circuitry. The device also offers the ability to externally adjust supply current and gain.
RSS
RFMW Ltd. announces design and sales support for the TGA3504-SM, 2 to 30GHz Gain Block from TriQuint (Qorvo). The TGA3504-SM offers 8 dBm of output P1 dB with a corresponding small signal gain of up to 11.5 dB. Output third order intercept is >17 dBm. Wideband performance of the TGA3504-SM supports multiple applications such as Electronic Warfare (EW), military and commercial radar and military or commercial communication systems.
RFMW Ltd. announces design and sales support for the TAT7472A1F from TriQuint (Qorvo). The TAT7472A1F is the next generation replacement for the popular AH22 that has served CATV designs for many years. With a bandwidth of 50 to 1218 MHz, the TAT7472A1F increases the frequency coverage to support newer designs. Noise figure is <3 dB. Associated gain is 15 dB.
RFMW Ltd. announces design and sales support for the TGA3503-SM, 2 to 30 GHz gain block from TriQuint (Qorvo). The TGA3503-SM offers 19 dBm of output P1 dB with a corresponding small signal gain of up to 10 dB. Output third order intercept is >25 dBm. Wideband performance of the TGA3503-SM supports multiple applications such as Electronic Warfare (EW), military and commercial radar and military or commercial communication systems.
RFMW Ltd. announces design and sales support for the TGA2624-CP, 9 to 10 GHz power amplifier from TriQuint (Qorvo). The TGA2624-CP offers 16 W of saturated output power with 27 dB of gain and can be used in both pulsed and CW operation for marine and weather radar applications. It is capable of operating from a 28 V bias with 365 mA of quiescent current.
Pasternack launched a new line of ultra-broadband and millimeter wave low noise amplifiers.These new high frequency LNAs offer very low noise figure levels, typically between 2.5 and 3 dB across the entire band, making them perfectly suited for use in applications such as electronic warfare, instrumentation, fiber optic communication systems, and more. The ultra-broadband and millimeter wave LNAs have IP3 levels as high as +42 dBm, low VSWR and are unconditionally stable.
RFMW Ltd. announces design and sales support for the TQP9108 from Qorvo. With two stages of amplification, the TQP9108 offers 30.5 dB of gain with 31.3 dBm output power. Covering 1.7 to 2.17 GHz, the Qorvo TQP9108 serves small cell and repeater applications, DAS and booster amp applications for bands 1, 2, 3, 4 and 25. Power added efficiency is rated at 39% with OIP3 of 46 dBm.
RFMW Ltd. announces design and sales support for a 1 W (30.5 dBm) Psat amplifier covering radar and satcom applications from 16 to 18 GHz. The TGA2621 can be used as a general purpose amplifier drawing 400 mA from a 6 V supply. PAE for the TGA2621 is 28% while small signal gain is 26.5 dB. Qorvo offers this amplifier as a 2 x 2.5 mm DIE.
RFMW Ltd. announces design and sales support for a 2 to 6 GHz GaN driver amplifier from Qorvo. The TGA2597 provides a saturated output power of 31.5 dBm with >31% PAE. Small signal gain of the TGA2597 is greater than 24dB with large signal gain >13.5 dB. Qorvo offers the TGA2597 for radar, EW and communication applications requiring low current (40 mA) from a 25 V supply.