DEVICES
EMI Filter
EMIS announced the availability of the MF420-2CF-M MRI Filter, a specialized electrical filter for use in magnetic resonance imaging (MRI) rooms to block unwanted electromagnetic interference (EMI) and RF interference (RFI) from entering or leaving the MRI environment. Designing or selecting an EMI filter for high-field MRI systems is very different from general electronics filtering, as MRI environments are extremely sensitive to RF noise and require shielded-room integrity as well as ultra-high attenuation across wide frequency bands.
EMIS
www.emisglobal.com
4-Way MLDD Power Divider
KRYTAR, Inc. announced a new 4-way power divider. Model 707125-1535 covers the full ultra-broadband frequency range from 7.125 to 15.35 GHz with > 18 dB isolation and ±0.5 dB of maximum amplitude tracking and maximum phase tracking is ±10 degrees. Amplitude and phase tracking are the ratio of one output to the other output in dB or degrees, respectively.
KRYTAR, Inc.
www.krytar.com
12-Bit Digital Phase Shifter
Planar Monolithics (PMI) Model PS-200M4G-12B-SFF is a 12-bit digital phase shifter that operates over the 0.2 to 4 GHz frequency range. This model offers 360° phase shift with an LSB of 0.09°, a phase shift error of ±5°, an insertion loss of 10 dB and a switching speed of 500 ns maximum. Unit size is 3.25 × 3.25 × 0.84 in. with a 15-pin subminiature D connector for power/control and SMA female RF connectors.
Planar Monolithics
www.pmi-rf.com
C-Band Planar Microstrip Circulator
Signal loss and thermal failure limit performance in high-power C-Band links. Traditional microstrip circulators often lack resilience for demanding satellite and defense missions. As the first release in Renaissance Electronics’ ferrite device line, the C-Band planar microstrip circulator provides a robust alternative. With circuitry embedded in ferrite and copper traces 300× thicker than standard, it supports 10 W average power, delivering reliable, space-grade performance in a compact planar form factor for mission-critical applications. Get the edge in RF designs.
Renaissance/AEM
www.aeminc.com/RF
Cryogenic RF Switch Module
The Menlo Micro MM4250 DC to 10 GHz SP6T cryogenic RF switch module enables low thermal-load signal routing in quantum computing and cryogenic test systems. Using electrostatic Ideal Switch® technology with sub-1 µW actuation, it minimizes heat generation while maintaining measurement stability. With up to 40 dB isolation, 4 dB insertion loss at 10 GHz and integrated calibration standards, it is well suited for superconducting qubit research, low noise measurement chains and high-precision cryogenic RF characterization.
RFMW
www.rfmw.com
X-Band FEM Integrates PA, LNA, Limiter and T/R Switch
Available at RFMW, the Qorvo QPF5012 is a compact multi-die front-end module designed for demanding 8.5 to 10.5 GHz X-Band radar applications. Integrating a T/R switch, limiter, low noise amplifier and power amplifier in a 7.0 x 5.0 mm over-mold QFN package, the device delivers 10 W saturated transmit power with 40% PAE, 20.5 dB transmit gain, 23 dB receive gain and a low 2.1 dB noise figure. By combining GaN-on-SiC and GaAs semiconductor technologies, the QPF5012 provides exceptional RF performance, efficiency and reliability in space-constrained system designs.
RFMW
www.rfmw.com
High Performance RF and mmWave Components for Demanding Applications
Knowles’ DLI RF and microwave components combine more than 40 years of ceramic and thin film manufacturing expertise to deliver high performance solutions for demanding applications. Products include power dividers, bandpass and wideband filters, build-to-print thin film products, single layer capacitors and more. Designed for aerospace, defense, telecom, radar, satcom and test equipment, these components support frequencies from 800 MHz to 67 GHz with exceptional repeatability, compact size reduction and stable performance across extreme operating temperatures from -55°C to +125°C.
RFMW
www.rfmw.com
High Performance RF Switches Designed for Next-Generation Wireless Systems
pSemi’s RF switches deliver industry-leading performance for wireless infrastructure, 5G massive MIMO, broadband, automotive and test and measurement applications. The product family includes high-isolation, high-power, antenna tuning, broadband, automotive and mmWave RF switches with frequency support extending up to 67 GHz. These switches deliver exceptional linearity, low insertion loss, fast settling time and high isolation in compact form factors, while monolithic CMOS integration combines RF, analog and digital functions while delivering best-in-class ESD protection, ruggedness and long-term reliability.
RFMW
www.rfmw.com
Si86Px Digital Isolators
Skyworks announced the Si86Px family of digital isolators with integrated power, a compact solution that combines high performance digital isolation with an integrated isolated DC-DC converter and matched miniature transformer. Designed for industrial and automotive electronics, the Si86Px simplifies isolated system design while reducing PCB area, BOM count and overall design complexity. The Si86Px addresses a critical challenge for system designers: generating high-quality isolated power in applications where board space is limited or where no power source is readily available on the isolated side.
Skyworks
www.skyworksinc.com
Dual-Directional Coupler
Operating over 0.5 to 18 GHz, this dual-directional coupler is engineered to simultaneously monitor forward and reverse power, enabling real-time VSWR and return loss measurements. It features a built-in DC pass for direct biasing and supports up to 30 W CW and 3000 W peak power. With 20±0.8 dB coupling, 1.5 dB max. insertion loss, 16 dB min. directivity and low VSWR of 1.35:1 max., units start at $1220 and are in stock, ready to ship.
URF
www.urfinc.com
Low Profile, High Current Inductor
Vishay Intertechnology, Inc. introduced a new IHLP® low profile, high current inductor in the compact 1212 case size. For space-constrained commercial applications, the Vishay Dale IHLP1212-EZ-1Z offers comparable electrical performance to larger devices in a compact 3.0 x 3.0 mm footprint with three profile options: 1.2, 1.5 and 2.0 mm. The device is optimized for energy storage in low profile DC/DC converters for PMICs, power line noise suppression and filtering. Applications for the inductor include industrial drives and tools, home and building control, computers and computer peripherals, consumer entertainment and healthcare devices, telecom equipment and medical instrumentation.
Vishay Intertechnology, Inc.
www.vishay.com
CABLES & CONNECTORS
Non-Magnetic MCX Connector Configurations
Amphenol RF announced the expansion of their non-magnetic MCX product series with additional coaxial connector configurations. These connectors are designed with non-ferrous materials and plating to eliminate magnetic interference in sensitive applications. Non-magnetic MCX connectors provide the same high performance as standard options and are ideal for demanding environments such as medical equipment, quantum computing components and wireless modules. The new non-magnetic MCX connectors are available in straight and right-angle plug and jack configurations with through-hole and surface-mount options.
Amphenol RF
www.amphenolrf.com
High-Density Hybrid Interconnect Solutions
Anoison deployed a custom-engineered hybrid signal cable assembly for a global hyperscale technology leader. This specialized assembly, chosen for its reliability and high-density capabilities, is now integrated into the client’s next-generation hardware R&D laboratory. Modern R&D environments demand the simultaneous transmission of diverse data types. Anoison’s engineering team optimized the 37-channel configuration to support a complex mix of high frequency, high speed data and low frequency, precision-control signals. The assembly ensures that high speed data streams remain unaffected by low frequency power or control pulses within the dense #25 shell.
Anoison
www.anoison.com
SMA Interconnects
Samtec, Inc. announced production quantity availability of its new high frequency, 50 Ohm impedance, SMA edge-mount board connector delivering repeatable, reliable performance through 26.5 GHz. The edge-mount design terminates directly to the PCB edge, providing a compact signal path that minimizes discontinuities and lowers return loss when compared to vertical or right-angle connectors.
Samtec
www.samtec.com
AMPLIFIERS
Power Amplifier
AgileMwT’s broadband 15 W power amplifier (PA)operating from 2 to 18 GHz is offered in a compact module configuration. AMT-A0350 provides a Psat of 15 W typical with a flat, small signal gain of 43 dB typical and ± 1 dB typical gain flatness with a VSWR of 1.8:1 typical. This family of PAs is competitively priced and can ship from stock or short lead time.
Agile Microwave Technology Inc.
www.agilemwt.com
High-Power Amplifiers
The ERZ-HPA-0002-0600-42-NS is a microwave power amplifier based in GaN, specially prepared for new space applications. It is based on its COTS equivalent, maintaining electrical performance and including key features ideal for new space applications, including radiation tolerance, performance in vacuum and outgassing compatibility, among others.
ERZIA
www.erzia.com
Solid-State Class A/AB Amplifier
Exodus Advanced Communications’ AMP20172 is a solid-state Class A/AB amplifier delivering 150 W across an instantaneous 6.0 to 18.0 GHz bandwidth. Engineered for EMI/RFI, CW/Pulse, lab and communication applications, it offers exceptional linearity with 100 W P1 power and a minimum 52 dB gain. Integrated protection and telemetry — including forward/reflected power, VSWR, voltage, current and temperature — ensure rugged reliability in a compact 7U rack-mount chassis. Built for demanding environments, the AMP20172 sets a new standard in wideband amplification.
Exodus Advanced Communications
www.exoduscomm.com