D/A Converters
ADI’s new AD9162 D/A converter provides broadband and wireless service operators with the industry’s highest bandwidth and dynamic range to satisfy rising consumer demand for higher quality, always-on data and video streaming without requiring expensive, large-scale architecture or design changes. Also, the new AD9164 D/A converter brings high resolution images for military and commercial radar designers while significantly reducing solution component count. The new device ensures improved accuracy as well as speed of test, contributing to faster market-ready time while significantly decreasing tester complexity and size.
Analog Devices Inc.
www.analog.com
Silicon Core ICs
Anokiwave offers a family of Active Antenna ICs at X and K/Ka-Bands for 5G, commercial radar and satcom markets. Supported with expert systems engineering and optimal technology solutions, the company’s highly integrated core ICs and system-in-package solutions provide its customers the fastest-time-to-market. Anokiwave’s patent-pending IP blocks implemented in silicon technology enable low-cost hybrid beam forming for 5G multi-antenna arrays with high energy efficiency and low latency beam steering™.
Anokiwave
www.anokiwave.com
MXP-Multicoax Test Solution
In a world where performance, speed and density matter, the MXP multicoax solution is the perfect fit. The small form factor and outstanding electrical characteristics combined with reliable mating and ease of use makes the MXP an excellent solution for benchtop and system testing with a large selection of bandwidths. MXP50 (50 GHz), MXP40 (40 GHz) and MXP18 (18 GHz) cover current data rate requirements. The entire MXP family comes with the highly flexible and ultra-stable MULTIFLEX cable as a standard.
Huber + Suhner AG
www.hubersuhner.com
Mote II for LoRa®
Mote II, the successor of LoRaMote, impresses with a new design and new features, including the new LoRa® module iM881A-M, a display and three buttons. Just like the LoRaMote, the Mote II includes a GPS module, sensors for temperature, pressure and acceleration. With its waterproof IP65 housing the Mote II is also suitable for outdoor use. Display and buttons make the handling more comfortable. The Mote II is certified by the LoRa® Alliance according to the LoRaWAN® standard.
IMST GmbH
www.wireless-solutions.de
Continuous Frequency Coverage
The Keysight N9041B UXA X-Series signal analyzer is the first to provide continuous frequency coverage to 110 GHz with a maximum analysis bandwidth of 5 GHz. Advanced front-end circuitry achieves low loss and efficient mixing, providing a displayed average noise level (DANL) as low as –150 dBm/Hz when characterizing wideband modulated signals in the millimeter-wave band. This adds new level of insight to applications including 5G, 802.11ad/ay and automotive radar.
Keysight Technologies Inc.
www.keysight.com
DOCSIS 3.1 Product Guide
Mini-Circuits’ DOCSIS® 3.1 Product Guide, a 116-page full-color catalog, showcases the company’s line of next-generation products for CATV and broadband markets. The guide provides detailed information on Mini-Circuits’ wide range of RF components, all carefully specified to meet DOCSIS 3.1 standards. This includes everything from passive devices such as its transformers, couplers and splitter/combiners, to active elements such as amplifiers, equalizers and more. With over 70 different DOCSIS®-compliant models, chances are Mini-Circuits has your application covered.
Mini-Circuits
www.minicircuits.com
5G/LTE Envelope Tracking PAs
Next-generation communication systems will rely on system architectures that will challenge component level design. This NI AWR software white paper examines the use of envelope tracking (ET), digital pre-distortion and impedance matching via load pull to improve the efficiency and linearity performance of RF PAs targeting 4G and 5G applications. National Instruments has equipped engineers and scientists with tools that accelerate productivity, innovation and discovery since 1976.
National Instruments
www.ni.com
Simulating Massive MIMO Beamforming
This presentation demonstrates a new predictive capability for simulating massive MIMO antennas and beamforming in dense urban propagation environments. Remcom’s unique approach allows the prediction of the signal-to-interference-plus-noise ratio (SINR) at specific device locations and the actual physical beams formed using these techniques, including unintentional distortions caused by pilot contamination. Learn more at www.remcom.com/massive-mimo-beamforming.
Remcom
www.remcom.com
M2M/IoT Line Card
Richardson RFPD offers a full line of IoT products and services from market-leading suppliers for your wireless products and applications. The company’s broad range of wireless connectivity products range from low-cost embedded modules to full-function gateway solutions, designed to address diverse applications in public safety, oil and gas, utility, mobile data, transportation, medical and transaction processing markets. Richardson RFPD’s strong and diverse alliance partner network offers extensive expertise to provide assistance with cellular data plans, cloud services, certifications and design services.
Richardson RFPD
www.richardsonrfpd.com
5G Test & Measurement Solutions
Rohde & Schwarz is supporting researchers around the globe seeking concepts and technologies for 5G wireless networks. The R&S SMW200A vector signal generator and the R&S FSW85 signal and spectrum analyzer both provide outstanding T&M capabilities for the generation and analysis of 5G signals based on the characteristics as specified in the Verizon open trial specifications. Equipped with a 5G waveform candidate software option and using an OFDM vector signal analysis software the devices make it easy to test waveform candidates and new frequency bands for commercial wireless communications.
Rohde & Schwarz GmbH & Co. KG
www.rohde-schwarz.com
Solutions For a Connected World
Skyworks invites you to browse their innovative Internet of Things (IoT) featured products for a broad array of markets and applications. The company’s transformative solutions connect people, places and things — from automotive to the connected home, industrial, machine-to-machine, medical, mobile devices and wearables. Skyworks connectivity solutions help you develop and launch your great new ideas. To learn more, visit www.skyworksinc.com/iot to review products and download a brochure.
Skyworks Solutions Inc.
www.skyworksinc.com
SPINNER EasyLaunch
The flexible, soft-launch PCB adapter SPINNER EasyLaunch is mounted flush with the printed circuit board (PCB) surface and ensures excellent RF performance, even with multiple launches. This technology permits variable positioning of the connectors everywhere at the board, maximizes flexibility for placing RF contacts and enable a more compact board design. Conventional solutions either limit the range of possible PCB layouts or reduce RF performance.
SPINNER GmbH
www.spinner-group.com