PMI Model No. PXO-100M-CD-1 is a 100 MHz, sinewave crystal controlled oscillator with coaxial output connector. This model provides minimum output power of +7 dBm with all spurs held to -60 dBC (10 to 500 MHz) and harmonics and sub-harmonics held to -40 dBc. It requires DC power of +15 V ±5% 40 mA max and is in a housing that measures 2.0 " 2.0" x 0.75".
Specifications:
| Frequency Range | 100mHz |
| Output Power |
+7dBm min +13dBm max over temp |
| Sub-Harmonic Frequency | TBD MHz |
| Harmonic & Sub-Harmonic Output Level | -40dBc max |
| Other Spurious Level | -60dBc max (10MHz to 500MHz) |
| SSP Phase Noise | -125dBc/Hz max @ 1KHz |
| Frequency Accuracy | |
| Initial Setting |
±10ppm max @ 25ºC |
| Temperature | ±50ppm max over temperature |
| Aging Rate |
±5ppm/ first year ±3ppm/ year thereafter |
| DC Power | +15V ±5% 40mA max |
| Size | 2.0" x 2.0" x 0.75" |
Environmental Specifications:
|
Temperature: |
-54ºC to +85 ºC Operating |
| -62ºC to +85 ºC Non-Operating | |
| Humidity: |
MIL-E-5400T 3.2.24.4 95% RH for 240 Hours at +60ºC |
| Shock: |
MIL-E-5400T 3.2.24.6.1 15Gx22ms. 3 Times x 6 Directions |
| Vibration: |
MIL-E-5400T 3.2.24.5 Figure 2 (sheet 1 of 3) Curve 3 |
| Altitude: | N/A |
