MITEQ introduces a family of broadband amplifiers that cover 4-8 GHz with minimum 36 dB gain, typical 34 dBm P1dB, 40 dBm output IP3, and a very low noise figure. The AMF-4B-04000800-50-33P is a balanced amplifier with excellent gain flatness to within ±1 dB typical over the full band.
Anatech Electronics has introduced the AM1650DC838 directional coupler designed for wireless and general-purpose applications from 800 to 2500 MHz. The AM1650DC838 provides 6 dB of coupling with flatness of +/-1 dB from 800 to 2500 MHz, insertion loss of 1.5 dB or less, a VSWR of 1.2:1 or less, and 40 W power handling ability.
The Model AMF-6B-08501070-80-33P-ISO delivers over 33 dBm of power over the band 8.5 to 10.7 GHz, with over 30 dB gain and ±0.75 dB flatness. P1 dB is over 34 dBm above 10 GHz. Noise figure is less than 8 dB, port VSWR is less than 1.5:1, and it draws about 1.4A from a single +12 to +15 V DC supply.
MITEQ’s AMFG family of GaN power amplifiers covers frequency ranges more than ten octaves wide. High impedances of these devices allow for excellent port match and gain flatness over very wide bandwidths. Inherent robustness of the device technology enables these amplifiers to withstand very high base temperatures or surges in RF or DC power.
MITEQ Inc. introduces Model AMFW-8F-17702130-150-P2-TC-WP, a very low noise, high dynamic range, temperature compensated, weatherproof Ka-band waveguide frontend operating at 17.7 to 21.3 GHz. Isolator protected at both the pressure sealed WR-42 waveguide input and K(F) connector output, the low-noise amplifier is lightweight with a small profile and footprint.